Cleaning your Glowforge | How To With Nick
Vložit
- čas přidán 25. 08. 2024
- Want to keep your Glowforge looking brand new? Follow along as Nick shows you step-by-step how to clean your Glowforge. It’s easy to keep your Glowforge in tip-top condition with a few simple techniques, so you’ll be able to print perfectly for years to come.
Discover more: bit.ly/HelloGl...
Wonderful tutorial. Seeing this done in a video is a lot nicer than trying to make sure i got everything listed in the article.
Can't wait to Order 1? Almost Ready.
Thank you for this.
Thank you so much! You make it look so easy! I hope it works out the same way when I try it 😅
Silly question: If you're using compressed air to blow any debris from the left circuit board, where does the blown debris go? Seems like it would blow it to another section of the machine.
Yes, the goal is to get the debris from coating the circuit board so that it can function properly. Once the debris blows off into your printer we recommend sweeping it out with a brush to remove it.
Thank you, so much. I feel like a complete idiot, harsh, yes, but after several attempts at trying to use my wonderful machine, following all of your user-friendly, easy steps for cleaning, I found a large issue. I hope this is why my machine has not been able to do a single project. MY LASER LENS WAS NEVER INSTALLED INTO THE LASER HEAD. 🙈 It was still stuck to the tool. How I missed that, when assembling this, I haven’t a clue. This video is amazing, and I appreciate you, immensely. I shall try this again! 😆 Wish me luck, all. 🤞🏻😆🙏🏼
Tara
Hi Tara! I'm so happy to hear you found what was causing you trouble. Please reach out anytime you need help, the team is happy to help you through these road blocks and get you up and printing as quickly as possible! -Ellen
I wipe my machine down every morning while my modem gets rebooted. It only takes a few min and keeps my machine looking great and I think it also keeps the wood smell down some. I wipe the cameras and lenses down about every other day. Have not tackled the crumb tray yet. I am wondering how Dawn Power wash will work on it.
I see lots of videos about "deep cleaning"... is there anything else necessary other than what is shown in video? For instance, the fan?
Hi Angie! Cleaning your Glowforge printer is simple. Nick takes you through the steps in this short video: czcams.com/video/SQ6FHvmZaaE/video.html&ab_channel=Glowforge.
On an average how often do you need to replace the print head?
Hi Steven! Your Glowforge printer head is not a consumable product so you should not need to replace your printer head. If your printer head becomes damaged for some reason, for example if you accidentally drop it while cleaning, we can offer a printer head as a spare part replacement for purchase. -Ellen
The part that will eventually wear out is the laser tube, the source of the cutting power. Depending on the power level you use, I have heard it should be good for about 500 hours of cutting (idle time on does not count significantly). I have had my glowforge for 3+ years and use it daily and I can't detect any deterioration. Definitely clean your mirrors and lenses regularly, it makes a difference in the cutting power/speed.
Nick I do not have the tool!!! How can I clean the lens!?? Please help me!
Hi Monica! You can use anything that’s normally used for cleaning lenses - Could be glasses, cameras, or binoculars for example. We like the Zeiss wipes (there are other brands too) as the liquid evaporates completely and the material removes grime without scratching. If you buy anything with a spray, don’t spray it directly onto/into the Glowforge. Always try to spray it onto a cloth first! I hope this helps. -Bri
Hello. I was cleaning my Glowforge and I lost the printing head (the blue) I order it but it didn’t come with the mirror (how can I order it) the name
Hi Eleonora, I'm not able to help with that here. Please send us an email at support@glowforge.com and we'll connect you with the right person to help. -Bri