🔥 Tips to Pass a 1G Stick Weld and BEND TEST
Vložit
- čas přidán 29. 01. 2017
- ►SUBSCRIBE for new videos every Monday and Friday: goo.gl/FRdNss
Int his video we will demonstrate a 1G weld test from root to cap. we will show you the correct way, as well as some common mistakes and show you a bend test to see what happens when those welding mistakes are made.
You will notice that there is an editing error when we show the grinding of the welds. If you would like to see the proper grinding technique, as it was meant to be shown, here is a link: • How to Grind Samples f...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
VIDEO SCHEDULE:
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► MIG Monday: New Videos every Monday!
► TIG Time: New Videos every Friday!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
EQUIPMENT WE USE:
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► ArcOne Helmets: www.arc1weldsafe.com
► CK Worldwide - www.ckworldwide.com
► Steiner Industries - www.steinerindustries.com
► West Chester Gear - www.westchestergear.com
► Tab and Slot Welding Tables: www.tabandslot.com
► Philips Welding Lenses (for Filming): www.phillips-safety.com/
► ESAB Power Sources: www.ESAB.com
► Everlast Power Sources - www.everlastgenerators.com
► AHP Power Sources - www.ahp.com
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
JOIN US ON:
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► FACEBOOK : / welddotcom
► INSTAGRAM : / welddotcom
► FORUM : / welddotcom
► TWITTER : / welddotcom
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ #welddotcom
Disclaimer: Weld.com is compensated for providing links in our descriptions. However, we only work with companies that we use ourselves and can honestly and ethically recommend to our audience.
Post requests for future videos as a REPLY to this comment.
Overhead 6010 root and mig open root
Weld.com 2g dual shield (FCAW-D)
the best welding jackets and helmets
Weld.com vertical up 7018 T joint I have tried everything. please help!
I'd like to see you weld auto body panels. which is the best process and techniques to use.
The Bob Ross of welding...when I get stressed...I tune in and relax....always great information..thanks so much Bob!!!!
I didn't hear him say put a happy weld here or anything like that ...
He doesn't make mistakes...he just grinds off any little happy accidents.
Whose the guy who dislike this video? He literally showed every aspect of the process, INCLUDING WHAT NOT TO DO and bend tested his own welds so you know it was done properly. Probably someone who couldn't sit still for more than 5 minutes.
Probably that CRAZY HORSEPOWER bozo. haha
Dylan Bojumpkio my best guess would be a Carpenter
Dylan Bojumpkio
Dylan Bojumpkio probably because he says the same thing 10 times.
just someone who probably can't weld
Great video! I really like the pedagogical approach where Bob tells us what he's going to do, narrates what he is doing during the weld, and then explains how to identify success and failure.
I echo your word John, type of instructor & approach i can listen to all day,
it gets through my thick skull !,
man, that was a sweet root pass. these videos have gotten so much better since bob took over.
I agree. I'm just a hobbyist welder with an everlast welder but I have learned so much
You got that right..rock on Bob Moffett!!!!
Bob is the best
Well done!! Enjoyed the start to finish and bend test--great job!! Not all welders can teach welding--you have that gift and i thank you for all the welding knowledge you share with your viewers! God bless!!
Excellent teacher!
I learn more from these videos than I ever did on the job. I started out putting exhaust headers together for old bikes, then I got a job doing repair to train cars, and now I'm working at motorcycle frames. I have a much better understanding of what I'm doing now, thanks for helping me become a better welder!
Thanks Bob! Really enjoyed this video and the thing I liked the most was your laid back attitude.
A pleasure to watch!
Excellent video with an excellent description of what is being done. Keep up the great work and thank you very much for the valuable training!
great video Bob informative and straight to point as usual keep the video's coming this is gold
Thanks, Bob. Great explanation and demonstration of terms us newbies hear all the time but don't really understand. It's crystal clear now. Well done.
Excellent demo Bob - very useful indeed.
Thank you Bob, that was a very informative and educational video. Well worth the viewing time and the bend test and prep was icing on the cake. Thumbs up from me!
Another great video Mr. M and to that comment about “seeing” the weld it’s called heat affected zone it’s totally normal especially on a bend test to show the exposer of the weld and heat input.
Thanks for the videos Bob! These have helped me on my “not so critical” structure welding.
I love your videos! I weld at a very amateur level. You know, I can do enough to get by but nothing structural.
Keep up the great work.
This may be the most complete demonstration I have seen in a welding video. Great idea showing us what can go wrong and what happens in a test when you do it wrong. Would be a cool video to show us how to fix those problems if they do happen. This new host is a huge improvement over the last guy. Keep up the great work.
Art Vandalay I
Importer / exporter or Architect...?
...New Host......you got that right...!
Thank you again Mr. Moffett. You answered so many of my questions with the bend tests.
Harold Watkins ij
Super informative. Really like that you show what to do right and what to do wrong.
Thanks!!
Awesome video. Purposely making the mistakes is a great learning tool. Very informative.
Thank you for doing this.
Brian Hutchison.
Mr. Bob, always a pleasure watching your videos, I like your strait forward relaxed approach you have, that's what I relate to, that's the way it is in the field keep it real. Turn and burn brother.
Passed 1G stick welding test in my 3rd week of shop 10th grade and i just wanted to thank you for sharing your knowledge with the world, i am now practicing open root 3G stick and after that my teacher is going to teach me pipe.
These videos provide me as much instruction as my instructors. So helpful.
You've done a lot to help me with this channel. Thank you so much.
I think its really great that this guy and others takes the time to make these videos. I've learned a lot watching these videos. Thank you Sir.
John here love a good weld a lot of fun back in the day watching your show puts back in time with some boys out at the old plant just retired in Jan.of this year
Excellent tutorial video by a pro, thanks!
I had never heard of a bend test before. That sounds like a good way for me to test the welds I make with my powerarc.
Nice video, very informative! It seems that even welds that are not perfect can hold some amount of pressure! Great video!
This is so cool, I want to learn how to weld now
Bob has really come around. He has gotten better and better with each video. Always been a good welder, but his presentation has gotten so much better. Great job and thank you for all of the helpful information.
We're glad we can help.
Good job Bob. Recently retired started welding for a living in 1976.
thank u this is better explained and not rushed. I appreciate it. so far I'm having issue with leveling it with an oxy fuel cutting torch. and when I put the plates together they ain't spaced apart evenly. with practice I'm sure ill get it
best welding series on youtube :P great job
Yet another great video. Thanks Bob.
Thanks Bob.
Great Video! Phil from Austria
Thanks man, I'm learning stuff. Your help is greatly appreciated.
Thank you for your video sir and thank you for sharing your knowledge with us I am in school currently and we’re working with 7018
Thanks for the very precise instructions. Great channel.
Very nice instructions..very helpful!
in canada we have two stop starts on the root. good video!
Love you videos Bob, thanks.
Exelent as always!!👍
Jodi, u and Bob r the best instructors
Another great video. Thank you for all the information you share.
Very informative.... really nice to see how it's done!
Thanks Bob Great Video
thanks for the lesson, great info ,,
Thanks to you sir now I know how to put it on on my basics 1G for my school from PH
nice video bob, greetings from Germany!
These videos are invaluable! Thanks so much for the instruction!
If it's invaluable try going to welding class. Its 5 mins of instruction 6 hours of blind welding. Stop bitching.
@@Mikey-ym6ok in·val·u·a·ble
/inˈvaly(o͞o)əb(ə)l/
Learn to pronounce
adjective
extremely useful; indispensable.
"an invaluable source of information"
@@Mikey-ym6ok wow you're so dumb.
Absolutely love this channel
Awesome teaching thanks. Good job
You do a great job , thanks for the info.
Thanks for all the help man. Learned a lot more watching your vids than wasting rods.
Awesome video! Great information! How can anyone be interested in a welding future and dislike this video?
I love welding and after watching Bob's videos, it only confirms it even more👏
In my first month of welding school an my horizontal overlapping having a hard time. Hope to comment back when I'm good
thank you for the the video! Could you please do a vertical and over head with back plate? I am in school and need to pass to get certified. this will help a great deal.
Samson the dog j
I never took a G1 test plate but it's good to see how it is done. So many welder fail trying to do a g2 test plate or g3 test plate flat when no one is looking. Thinking the weld was stronger flat just to find out that the penetration was poor in the flat position.
great video bob i follow from mexico
Man this a very good video, very detailed. Very knowledgeable guy. 🧑🏭
Thanks Bob for this great video. One question: what is the acceptance criteria for welding discontinuities in DT tests like bending shown here? naming the reference would do the job. Thanks in advance!
Old folk sure do love their coupons .
Great video.
I was a welder, now I am a school teacher. This approach meets all the criteria for excellent pedagogical practice.
I am interested in seeing your technique in back feeding the filler metal using GTAW Process. Viewing the videos, I understand that is your favorite method in welding a root pass, either on pipe or plate in some cases. I would very much appreciate if you could show the "welders point of view", looking through the gap, while back feeding the wire, starting from 6 o'clock advancing to 12 o'clock. This is of course welding beveled pipe coupons. 6 - 8 inch schedule 40 or 80. It could be either a 5g or 6g position.
Thank you for the educational videos.
Thank you on the root mishap, I never really understood why I got a divot on the back side of my root. Now I do have one question on the 7018 fill did you plunge grind the edges of the weld and if so how deep should one go. I ask because i was told to do this before, but every time i have tried, I either got pin holes on my cap or it would bust on the bend. The only way I could stop that was to not grind it but crank the machine up by 5-10 amps, and I've been told that it's not the proper way to do that.
16:36 i loved when that happens when i weld in school. i had that happen a lot to me and other really did not had that happen to them a lot only like a few times. wish i could go back into welding but i like the job that i have right now. there is not point for me to get back into welding if i dont have anything to weld for.
I really wish I'd had a teacher that could explain all the aspects of what was happening and WHY like you. Instead I had a person who just criticized without a corrective answer, just told you this is the way do it right never really teaching you what you did wrong. So yeah I had A LOT of bad habits I had to overcome because no one ever explained what I was doing was wrong and what happens when you do it that way. Just told you thats wrong go fix it😑😧 discouraging.. I hope a few of your students go on to teach. There will be a new generation of competent skilled welders that come out
At least you have someone telling you the right way to do it. My teacher gives 10 minutes of classroom instruction, then I'm by myself in the welding booth for the next 6 hours.
@@dustingresham8078 happy it's not just my welding classes. I thought my instructor just doesnt care. Here's 2 minutes of what we have to do. Go weld for 4 hour's and if I fuck it up its my fault lol
Good video, Thanks.
i like the demonstration on how to do it wrong. i find making mistakes to be the best way to learn
Nice video......... when I certified on D1.1, they didn't allow grinders. They (Iron workers union) only allowed chipping hammer, wire brush and an awl/pick.
How can someone dislike such great work? like seriously
Sore "experts"
very good video bob!
Fantastic info, priceless
So should I long arc my I restart back from the keyhole as well or just deposit right over top of my previous weld?
I've worked in metal fabrication as a finisher and as a CNC operator, Im out of the field now but interested in welding, I worked with a lot of welders and always enjoyed talking about their work. What is the best way to get into welding?
Great video ! a lot of good information :D i would like to a 1g stainless on perhaps 5mm or thicker Thanks
Great video!
Good video but the root i was told has to be whipped and use a 6010 hot pas to cover with 3 bead cap. Does it make that much difference on the root running it that way?
Bob --Can you take us through a bend test for pipe for maybe a 8 inch? Show where to cut straps and prepare the test pieces. I know a 12X12 branch would take awhile that is why I was asking for a simple 8 inch pipe. --Keep up the good work. Learning alot from your channel and one day I am going to drive out and hook up with you on doing some welding.
THANK YOU SO MUCH
Awesome job
I"m impressed Bob,great teacher
If there were teachers like you in public school, I might have made it to high school..lol Thanks for all the vids.
You make just one of the best welding videos i has see. I want lear how to weld. But i saving money to enroll in school
Thx for the vid!
Can you tell me the Amperage of the opening root, Hot pass, second pass, and also cap?
Did you used to weld 75 amp or above on root pass?
Bob is the man!
Best video I've ever seen produced on this, awesome job!
Great vid as usual I’m ready for the point that I’m so good at all welding techniques that’s I purposely have to force a mistake 😆 in till then I’ll burn more rods and stick more tungsten
Yeah 3g position gets me. Trust me those voids where you stack a weld over two welds can happen and rip your coupon open. I failed that way once. But also for beginners turn down ur temp/amps a bit. It helped me a lot to get my certs
Love your videos! Any chance of doing some basic sheet/light gauge plate fabrication with a press brake / sheet metal brake making a basic box? Maybe even a door hinge as well. Thank you for considering!
Mike
Thanks for the feedback but I do not have a brake in my shop.
can you show a video on macro etching the weld? thanks
I started to weld last year (freshman) now I'm a sophomore, still taking welding but I'm not taking my Bend test this semester, but next semester I can take it. I just need to do more practice. But wish me luck for my bend test next semester!
How's it going? I'm n my first montg
Thanks for the video! What jig do you use for the bend test??
great video
Good stuff 👍💯
So you bent the coupons when they were to hot to hold?
That reason for gloves?
I need to get better in welding 1 to go to welding 2 but I am behind because I moved. Any suggestions, I’ve been watching more videos like this and practicing vertical but everyone else is on overhead
Great Job