Overlanding Tool Kit // Land Rover Defender
Vložit
- čas přidán 8. 12. 2022
- Tools and what to bring with you is always a big question, I open my Tool box to show you what we bring for our Overland worldtrip.
A 23 year old Land Rover with over 250k Km on the clock is not known to be the most reliable rig. You might have seen me, in our videos, constantly fixing the small hiccups the Bluelandy is producing. But so far I can proudly say, that I only broke down once in 100.000km (as a Land Rover newby) driving a TD5 Defender. To some, it might seem I bring too much tools but doing all repairs myself requires a bit of kit. In therms of tools and I would recommend the brands that I own (Stahlwille, Wera, ...) without being sponsored by them.
Here is a list of all major item I bring(*):
- Assembly leavers amzn.to/3FA40lX
- Hammer amzn.to/3HkHkY7
- Spanners amzn.to/3HkHkY7
-Torque Ratchet amzn.to/3VYPCJ9
- 1/2" Ratchet amzn.to/3UHygQa
- Long Nuts 1/2" amzn.to/3Yaho7I
- Torx amzn.to/3Hk9AKp
- 52mm Nut amzn.to/3Pprs8V
- Prob shaft nut www.britpart.com/all-parts/da...
- 3/8" Ratchet set amzn.to/3HkF8jw
- 1/4" Ratchet set amzn.to/3PdpFDO
- Screw driver set amzn.to/3iNhnpV
- Alen keys amzn.to/3UAKZUN
- Multigrip pliers amzn.to/3FyAlcS
- pointed pliers amzn.to/3h9y7qV
- electrical pliers amzn.to/3iO8Cfn
- circlip pliers amzn.to/3VHoJda
- drive punches amzn.to/3HlLUFw
- chisle amzn.to/3Yak4SO
- Metal drills amzn.to/3PcAEwU
- Power drill amzn.to/3uAqKfm
- rivet gun amzn.to/3BiKwzy
- Loctite medium amzn.to/3VI330y
- Sealant amzn.to/3F3SHAY
- oil filter wrench amzn.to/3FBYaAq
- grease gun amzn.to/3P8IuHW
- cutter amzn.to/3FzUqiQ
- sandpaper
- triangular file
- tape measure
- caliper amzn.to/3hbz2qS
- Axe amzn.to/3uANI5O
- saw amzn.to/3h7vndH
- Tire fixing kit amzn.to/3P7V5LD
If you have any questions, please let us know in the comments!
About our Chanel:
We, Kai & Irati from Germany and Spain, are currently on a full-time Overland journey. We quit our jobs, our apartment and left Germany mid of March 2022. We traveled all the way from Germany to Iran, and had amazing experiences for the last 6 months. We are changing our plans and we will alter our original route. Follow us in season 2 where we will be exploring the Middle East and Africa!
If you want to know more check out this Playlist:
• ABOUT us & The Bluelandy
Social Media:
Travel-page: / thebluelandy
He: / mrkaifox
She: / iraticortadi
Introducing our Home on Wheels the Bluelandy, check the Room Tour(*):
• Land Rover Defender 11...
Land Rover 110 TD5 (MY 1998)
X-Vision-X PopTop (roof Tent)
BF Goodrich tires 265/75/R16 amzn.to/3BcEeS0
Land Rover HD springs & Kony Heavy track Raid shock absorbers
GMB "Esel" roof rack
GMB long range fuel tank
GMB Sandboards
X-Vision-X exterior storage box (rear left)
DIY Custom outdoor shower
270° Foxwing Awning - Rhino Rack amzn.to/3FtyUfv
200W Victron Energy solar system
- Solar Panel: 2x Offgrittec 100W
- Charge controller amzn.to/3gXf2s5
- Battery Monitor amzn.to/3VSNwdN
- Inverter amzn.to/3BgTEon
Nolden 7" Bi-LED headlamps
Additional Headlamps amzn.to/3VXo32P
HELLA Value Fit Exterior lights amzn.to/3F46eso
ExTec rear door folding table
DIY Custom Flight case interior
Autotherm D2 Diesel Air-Heater amzn.to/3P5NVaL
32 l Engel Fridge / Freezer
Lifesaver Jerrycan water filter amzn.to/3UIybvG
Camera Gear (*):
DSLR: Canon 80D amzn.to/3VRa7aI
Point and Shoot: Canon G7x
Action Cam: GoPro Hero9 amzn.to/3P7plGE
Drone: DJI Mini 2 amzn.to/3UDYnHw
(*) Disclaimer: This video is not sponsored but we may also have affiliate links to the mentioned tools/gear, which means every purchase made allows us to earn a small commission to keep our channel running. 🙌
#overlandtools #toolbox #overlanding #werkzeugkiste #bluelandy #worldtrip - Auta a dopravní prostředky
@GustavoScarpellini you asked for this video and we delivered. ✌️
It took some time to get everything out, record and edit, but thank you so much for the request, we hope it helps others as well ☺️
Good set of tools
Thanks! It was sufficient for all the repairs we had to carry out
Agreed
Really great setup, just view, my suggestion (before watching your other video, next thing i will do soon) are more electrical spare like: wire , connector, swtitch (!!!), crimper, kumpercable/booster, some relay and finally solenoid starter(!)... and I hgave spare vise can mount on trailer hitch
Hey, thank you for your suggestions! I got some wire some Wago connectors, and crimp connectors, and a soldering iron, aswell as a multi meter and fuses. That was more in the section spare parts than tool. But fair pint. The magnet switch was rebuild before the trip and I had to overhaul it in Argentina (either ep 72 or 73). I do not bring a crimper a Normal pair of pliers do the job it's not to code but but it works long enough to get back to civilization. 😉
Great video! This is the kind of stuff that isn’t sexy but can really impact a trip. I’m always concerned about the balance between having enough tools without carrying too many. This really helps!
Thanks for the feedback! I’m glad it helps. I would probably carry less on a short trip, but on this trip I gotta say I used almost everything that’s there and I even added a 27 and 30 spanner to adjust the steering
I always have a BFH on hand (big F'n hammer!). A big lump hammer is very useful for persuading bits of metal to move. You may not need it often but when you do, it's the only thing that will work.
Good point, sofar I didn’t miss one, my issue is I don’t know where I would store it in the car.
Moin!
Das ist meiner Meinung nach eine gute Zusammenstellung, um sich selbst aus den gröbsten Miseren zu befreien. Danke für die Zusammenstellung und happy Landrovering.
Beste Grüsse
Danke fürs Feedback!
I think it’s a reasonably comprehensive toolkit well thought out to to cover most repairs. You cannot carry everything but what you have seems to strike a good balance as borne out by your own experience. If possible it’s always best to have the tools to do the job yourself, especially when travelling to remote places.
Thank you for the feedback! The kit is serving us well so-far. 😊
I would add a small multimeter (multi purpose measuring device).
We have one !! And use it all the time 😬
@@Thebluelandyin a defender it’s pretty much compulsory and your bound to be forced to become a backyard auto sparky without realising it
Great series of videos for sure. I have subscribed. As an aside, if I were you I would think about going back to the original rear wheel bearing adjustment method used on the older 110's, with just two nuts and a tab washer. This way as bearings wear you take out the play and drive on with no need for different size spacers and extreme torque. Wheel flange off....tab washer bent back, nuts tightened and do up in reverse and drive off. All the best. :)
Hey thanks for reaching out! Glad you like the videos!
I heard from some that did it. So far luckily we did had much trouble with wheel bearings. But this might be worth it knowing that we have lots of km in front of us. Do you need to change hubs or stub axles? Or is ist just bearings….
Great set up of tools for a Land Rover travel tool kit . Thanks for sharing your tool video . Cheers from Steve Stott in Sutherlin Oregon U.S.A. :):)👍🏼
Hey Steve, thanks again!
I can recommend moving to a good tool bag. I'm using the "blue ridge overland gear" tool bag and I fit pretty much everything you showed in that bag. I also carry electrical tools like a butane soldering iron, and other stuff all in that bag. Removing all the tools from their hard cases saves a lot of space. And you can also consolidate. eg. the ARB tyre repair kit contains a set of pliers and a blade which are probably not needed. Anyway, good video. Thumbs up from me.
Hey Richard, thanks for the hint I had a tool roll before for shorter trips it was fine. But I like the box cause it fits perfectly underneath the floor and holds everything. Works just well for me. Yeah I know I could save some things here and there, but if I removed stuff from the tire-fixing kit I'll loose it and it's convenient to move it from one car to the next and know you've everything you need…
My brother brought the soldering iron so that is in the car as well 😉
Thanks for commenting!
Awesome video, definitely a very comprehensive kit! But if you also have the knowledge of how to repair all these those things then for sure worthwhile to bring on a trip like the one you guys are on! Keep it coming! Awesome content you guys are producing and I'm loving following along 🤙
Most of the time I'm at least confident enough that I will be able to dissasable it. If I manage that, I'm kinda in the position that I have to put it together again... 😂
Thanks! We appreciate the feedback!
great set - not as experienced as you guys are, but i have also a long flexible gripper in case something drops and hard to get at, it is also equipped with a magnet. oh and a small magnetic dish, where you can drop in your nuts and bolts while you work on the car.
That’s good additions, but due to the limited space they had to stay at home.
In a lot of places I swapped the original bolts to stainless steel, those don’t stay in the dish there for I don’t miss it too much.
Thanks!
If you get a chance, let us know what spare parts you like to keep on board. Your video is my baseline for my tool kit now. Thank you
They Thomas, we recorded that video already twice but never published it. Spares always change. And strongly depend on the car and the state is in, as well the countrys you want to travel. We are really lucky and the car is performing great. But in promis the video will come!
Pretty much all you need, I have a Lidl's toolkit, screwdrivers, pliers, sidecutters and a set of spanners for the "overland tool kit" there will be more in that than the kit as is. I would suggest you also have a few imperial sizes like 2x 9/16th for the prop, 1/2" bi-hex sockets for the brake calipers, and a 30mm shallow socket for checking the rear axle ball joint, radius arms and the transfer box drive flange nuts. You have pretty much minimal amount of what you need.
Hey, thank for the hint!
The tool/socket for the prob is in 1:55 together with a 14mm works great.
All the stahlwille nuts are be hex, I had no problem with the metric sizes while we took of the calipers. But I'll check that again.
Yeah you're right a short 30mm socket is missing.
A portable grinder would come handy in a lot of cases and air blower...You can find both working on the same battery from Bosch
Hey, I’ve small grinding bits for the power drill, I’ve nothing like a angle grinder if you refer to that. But didn’t miss it yet.
We got an compressor onboard we use that as blower.
With all those tools you could start your own mobile service business.
That's a good idea maybe I can start a side hustle
You forgot the kitchen sink
Sorry, can you explain more? I don't understand what you mean with the kitchen sink. 😣
Just get a Landcruiser then you won’t need any tools
At that point you might want to get a Tesla so you don't need diesel…
One you buy Japanese you might as well hand over your man card not to mention the cops might charge you with treason for supporting the enemy