I love your Colorado videos man. It’s been a great guide for me. I just bought a 2019 Colorado LT a few weeks ago and I’m itching to mod it man! You and Horse Power Obsessed are great!
I've been using Lasfit LEDs for the last couple years now. Great quality at an amazing price! I won't buy any other brand again. I live in Minnesota and they didn't miss a beat at -40° below this winter and ran cool at 110°+ in the summer. I highly recommend them to anyone
I’m on my second set of my lasfit... on my Chevy Colorado. It’s great. Don’t run them during the day. I literally ran them day and night and the first set only lasted me a year and 10 days. So I have a habit of getting in the truck and automatically turning off my lights during the day time. These lights are bright. When I say bright I mean bright. Some people think I have my high beams on and get mad. Good product.
I’m looking at your video because I want to change my LED lighting, but I also noticed that you mention that when the highbeams are on the fog lights turned off how can I have my highbeams and fog lights on at the same time?
You made an improvement as usual.ive watched you throughout this yr make alot of small improvements that have added up to a better looking truck than you could have bought from gm.
I'd like to see you put the socket covers on for all of these bulbs. This is a known issue for LED upgrades to this vehicle, I have learned the hard way.
Hey man what was the issue.. my backup camera has failed black screen on and off when I’m in reserve. My dealer is blaming the after market led bulbs I swapped
How was the fit with the dustcaps on both the low and high beams? Or did you not put the dustcaps back? On the Diode Dynamics the cover can still be on..
I am considering in joining the party with my first new Truck, I want to add fog lights but not through the dealer as it is much more expensive, My question is does the WT come pre-wired for this add on, if not what harness will I have to purchase and is it plug and play or do I have to take it in to the dealer to have it programmed?
Love the truck! How ya like the lift kit? Getting any noises out of it going up bumps or pot holes lol. I need LEDS, are you able to put the dust covers back on after these?!
Curious how long do the leds last. Seems like from some of the other people doing videos on leds they may not last very long. You seem to have problems with the ones you replaced. Good video
Matty, I’m with Jaime, my dust cover would not fit over my low beams. Lasfit said there is no way to get the dust cover back on over the low beams because the fan adds too much length,how did you do it?
@@edperry1141 I just put on the LA series on my truck and i was having a hard time putting back on the dust cover. It only secured on a few sides. I dont think the dust cover can go back on normally
Hey Matty did your stock dust cover caps fit over the LS Plus LED bulb ( Linked above)? I ordered and tried to install but it wouldn't fit with caps on. Am i doing something wrong here?
DON'T FORGET TO USE THE COUPON TO UPGRADE YOURS! 10% OFF BABY!
I love your Colorado videos man. It’s been a great guide for me. I just bought a 2019 Colorado LT a few weeks ago and I’m itching to mod it man! You and Horse Power Obsessed are great!
I've been using Lasfit LEDs for the last couple years now. Great quality at an amazing price! I won't buy any other brand again. I live in Minnesota and they didn't miss a beat at -40° below this winter and ran cool at 110°+ in the summer. I highly recommend them to anyone
Good to hear it man!
I’m on my second set of my lasfit... on my Chevy Colorado. It’s great. Don’t run them during the day. I literally ran them day and night and the first set only lasted me a year and 10 days. So I have a habit of getting in the truck and automatically turning off my lights during the day time. These lights are bright. When I say bright I mean bright. Some people think I have my high beams on and get mad. Good product.
100% agreed!! Thanks man!
Lookin' good, Matt! Gotta love matching LEDs! 👍👍
How are your lasfit led's holding up, i just bought the high , low, and the switchback turn signal. Your discount still works. love the channel
That exhaust resonator delete is sounding really good. That's definitely my next mod.
Love the content!!
Thank you man! I appreciate your support!
Just got my 2021 ZR2 upgraded bulbs. Saved with the code!
Nice buddy!! Happy for yoy
I’m looking at your video because I want to change my LED lighting, but I also noticed that you mention that when the highbeams are on the fog lights turned off how can I have my highbeams and fog lights on at the same time?
You made an improvement as usual.ive watched you throughout this yr make alot of small improvements that have added up to a better looking truck than you could have bought from gm.
Thank you man! Much more to come!
I'd like to see you put the socket covers on for all of these bulbs. This is a known issue for LED upgrades to this vehicle, I have learned the hard way.
Hey man what was the issue.. my backup camera has failed black screen on and off when I’m in reserve. My dealer is blaming the after market led bulbs I swapped
You should get in contact with diode Dynamics their LEDs have a 3 year warranty. Have them replace it and keep them as backups.
Yes... I will do it ...
What about the side yellow light next to the low beam. On the front side.What should i install?
Hey man. What bulbs do I use for the switchbacks. Sorry for the Noob question. haha
Just installed the LD H11 Switchback my dust caps don't fit back on.
Yes, had the same problem. It’s not a good idea to leave them off either. Have an email in to the company for a refund.!!
Do the stock dust caps work with the Lasfit LED's?
Yes
Cool stuff matt👍😎
Thank you!
Please give me part # I went in website and was confusing 2018 Colorado ZR2..
How was the fit with the dustcaps on both the low and high beams? Or did you not put the dustcaps back? On the Diode Dynamics the cover can still be on..
Yes the dust cap are back on! They fit perfect ....
Do you leave the caps off after installation?
i had 4 sets of diode dynamics low beams each time poor workmanship i just switched to lasfit i hope they are built better
Does the factory dust caps fit over the new LED’s?? The light output looks really good!!
They should! Fit for me
Does the LED unit get hot enough to melt the wiring I stuffed under the dust cap!!??!? Just curious...
Great review, did I miss it? What is the part number for the LED fog light swap?
I am
considering in joining the party with my first new Truck, I want to add fog
lights but not through the dealer as it is much more expensive, My question is
does the WT come pre-wired for this add on, if not what harness will I have to
purchase and is it plug and play or do I have to take it in to the dealer to
have it programmed?
Love the truck! How ya like the lift kit? Getting any noises out of it going up bumps or pot holes lol. I need LEDS, are you able to put the dust covers back on after these?!
The lift is great so far ... no issues at all... having a great time with it ! And yes ... the caps are back on!
When I try to buy the LEDs on Amazon it says they don't fit the 2021 Colorado. If someone could just tell me what to buy that would be great.
New video about it tonight! Make sure to press the 🔔 for notifications when the video is live! 6pm eastern time
Had all LED lights but the high beam. Just ordered the lasfit with your code
Nice man! Glad you took advantage of it!
Do you know when the low beams will be back in stock
Not sure! I will reach out to them and try to figure out
So those lights come with the resistors? Or you have to pay extra?
What do you think about bug deflectors. Yes or no
Hi Matt so with the gray led it’s okay to leave the dust cap off?
How do fix the issue , where the fog lights and hi beams both turn ON?
What is part number for low beam Lasfit leds? Link does not work
Are you able to put the dust cover back on ?
How are they holding up almost a year later?
Curious how long do the leds last. Seems like from some of the other people doing videos on leds they may not last very long. You seem to have problems with the ones you replaced. Good video
I will definitely keep you guys updated on that!!
@@Matty.Garage 👀 did they last?👀
Were you able to put the dust cover back on with Lasfit Leds?
Yes sir!
Matty, I’m with Jaime, my dust cover would not fit over my low beams. Lasfit said there is no way to get the dust cover back on over the low beams because the fan adds too much length,how did you do it?
@@edperry1141 same here... Lasfit told me to use the LA series , those will work with dust covers. So ordered them and sending the LS back.
Jaime Campos they are sending me the LA low beams to try out. They said they are less powerful than the LS LEDs, I’ll try them and see how it goes...
@@edperry1141 I just put on the LA series on my truck and i was having a hard time putting back on the dust cover. It only secured on a few sides. I dont think the dust cover can go back on normally
Your link for the low beams don’t work. What are the model and size of these bulbs?
Check my latest video... on the description
Great video
Thank you sir!
What model low beams did you go with? Seems to be many different options on there website?
Use the one from the link...
Good info!
Thank you!
what happens with the drl?
Matt does the the dust covers still fit back on over the Lasfit lights?
Great Review thank you 👍🇺🇸
The Vermonter
Thank you!
How many lumens do the low beams put out?
This is a good question I will check and let you know
Hi where can I buy these?
Thanks
Check my lasted video ... there is a link on the description
What exhaust are you running?
Stock... with the resonator deleted
What’s your switchback link? I didn’t see it above
Diode Dynamcis
Alright. Did your truck come with projectors or did you add them?
Alright. Did your truck come with projectors or did you add them?
Alright. Did your truck come with projectors or did you add them?
Hey Matty, may i ask why you switched to Lasfit LED s? I had watched your previous video with another brand. Which do you prefer for headlights?
Hey man! They are better ... at least for me ... they are brighter for sure ... and the customer service was way better ... at least for me
@@Matty.Garage thanks Man
Hey Matty did your stock dust cover caps fit over the LS Plus LED bulb ( Linked above)? I ordered and tried to install but it wouldn't fit with caps on. Am i doing something wrong here?
I just had the same problem....we see if I get a refund...don’t want to leave the dust cap off!
nice truck but it's only a 6 out of 10... Why? Because you still have you spare tire underneath the truck. come on bro take it down...
You are 100% right ... Im lazy... we will get it done!!