Lamborghini Murcielago First Drive - Custom Fabrication & WHATS BURNING?!?
Vložit
- čas přidán 13. 01. 2024
- Todays episode is sponsored by MERCH! bisforbuild.com
Thanks to Redodo Power for the battery
5% OFF using code: Build
Redodo 12v 100AH mini Battery: www.redodopower.com/products/...
Redodo official website: www.redodopower.com/?ref=bis4...
❱ Shop - bisforbuild.com/
❱ Patreon - www.patreon.com/user?u=3364742
❱ Facebook - / bisforbuild
❱ Instagram - / bisforbuild
❱ Twitch - / bisforbuild
Music:
Fareoh - Cloud Ten - Auta a dopravní prostředky
Chris, I think it is past time to give Oscar the BisforB credit card and let him design and build himself his dream workbench. He has more than earned the right to work/fabricate on something better than a cheap ass folding table. And how about springing for some decent HD storage racks, so he doesn't have to work in/around so much clutter on the floor? He is a talented and loyal friend and professional. Show the man the respect he deserves!
let him design and build himself his dream CAR***
I couldn't be more happy the Tesla swap didn't work out! The sound of that V12 singing is just SO worth it!
Just run a battery isolator for the front battery, no need to complicate it with a plug-in recharging system. It’ll charge when the vehicle is on and running, and then be completely disconnected from the rest of the car when the vehicle is off. We do that all the time.
I came here to suggest the same thing! 🤘🏼
You can use 200 amp relay and do the same thing
I use 500 amp relay when I do big sound systems
@@aaronbrooks4235 That's what a battery isolator is. Just a high current relay.
@ichurchill90 the term is contactor
I’m SO glad the Tesla chassis swap didn’t work out and you got this beast running. Well done!
My question is what will they do with their electric AI skateboard.
For real. Teslas are fast but what a disgrace to Lamborghinis everywhere that would have been lol
True, I just got slight motion sickness after 20 or so minutes on full screen on a pc loookin all of the wobbling and bobbing underneath and around chasis...
@@jwalster9412 I know he wanted to EV swap the Delorean...
@@jwalster9412they still have that 3d printer I think the should do a custom body
You guys should run an air filtration box when cutting carbon/glass fibre panels. All the dust is on your clothes, floor, cars etc. Over time you will disturb this dust and inhale it. A filter box will pull in the airborne dust and remove most of it for good and prevent much of it from travelling far.
B is for build not known for any OSHA or best practice procédures. But def wouldnt take that much time. Doesn't cost much. They just do it quick and dirty
They should get Harbor Freight to support the channel with a duster collector donation.
That is excellent advise.
Cannot believe how a semi destroyed murci can be so fricking cool! Love it ❤
Keep the factory color. It looks great, unique, and I think it will show off the widebody well. Plus it will have good contrast with your lip, diffuser, etc.
came here to say the same thing!
I Second that as well I am enjoying the red with black accents
Oscar is a friggin God. Man could build a car from scratch easily. Hes got the big brain.
Well he does everything on the channel. Not sure what Chris actually does tbh.
@@jaysonaustralia6923Steve jobs type of role
Oscar is a genuine “do-er” nothing stops him (like quickly making a makeshift lathe using an electric drill to make a copy slider bolt 😊) If I was driving in the Dakar Oscar would be my choice of co-driver every time!
@@CertifiedSwerver and Oscar is the Steve Wozniak
@@jaysonaustralia6923editing, sourcing parts, filming, comunicating with sponsors, some smaller jobs, etc., i think itd be shitload of work all together, because every business is
The tire diameter/rim size also does affect the clutch on these F1/E-gear cars. Just be sure the wheels are the right size
not with 2WD
That only happens with AWD, that's why he converted it to RWD.
@@joealex65 converting it to rwd doesn't remove the problem it simply reduces it to two wheels worth of load
@@Adierit RWD completely gets rid of the issue. With AWD, the issue associated with the incorrect sized overall diameter of the tire is it kills the front differential.
Yea thats AWD problem. I had one summer tire stuck in my 4wd car when i swapped winter tires on it. It went totally nuts because one different tire. I needed to turn driver aids completely of to be able to drive it. To the place where we got the remaining winter tyre on it after extracting that one summer tire of it.
@B is for Build:
By integrating a Relay like the Cyrix CT from Victron, both batteries are charged while driving without any hassle. Its specifically made for connecting lipo with normal starter batteries
Chris, I have been watching your channel ever since you were trying to paint your BRZ in your backyard, so watching all of these crazy rebuilds (including your yacht) is just so crazy. Congratulations brother, you...have...arrived! I never thought that one day you'd have been rebuilding these beautiful cars someday, but here you are bro! It was never a doubt of your abilities, it was just how your channel evolved and I'm proud to have been around for so long to enjoy the ride!
Agreed! So cool to see his progression. I started watching with his first Z car. Love the channel and the team. This is what we are striving for with our channel. Goals for sure!
Its alive! What a wanderfull Murci its turning on! 2 wheel drive! Yeah bb! Ligther! More fun... And so rare...the japanese do that conversión for drifting... Out there are some great hill monste machines... These Will suts whit those! Congrats... I cant weit to see that Wide body.... Wild! Good lock B!
You'll want a 12vDC to DC charger, like a Victron Orion-Tr Smart 12 | 12 - 30 to charge the Redodo 100Ah Mini off of the Alternator. It has a configurable charge profile for the LifePo4.
I’m so glad you got the Murcie engine running. So much more satisfying than “I put a Murcielago body kit on a Tesla!”
I'm so happy to see that car back on the road again! It deserves a second chance. Great work guys, I can't wait to see how it will look finished.
Oscar is the GOAT of this channel. Watching him do custom fab work is always a joy to watch.
I was just thinking if Oscar ever gets mad and leaves Chris will be in a world of hurt. Oscar just makes it look so easy to do. LOL
hope he's getting paid fairly...
You can genuinely see how happy you are driving the Murciélago, it looks insanely cool with all the broken panels and missing headlights, can’t wait to see the end result, also it’s great to see you still have your L322, I noticed you have the side steps on yours, make sure to check they aren’t trapping any dirt or water as they are notorious for that and causing rust, rear arches are definitely a place to check anyways, it’s a great camera car with the split tailgate!
37:08 "thank you for the tires" *he says, absolutely shredding them*
You guys clearly have the courage, experience and experise taking on bigger projects. Thanks for sharing!
I'm REALLY starting to enjoy this build. very happy it randomly turned out like it did.
The taillight strip thing reminds me of what they did on the P1. The taillights were an after-thought, the rear was all designed without them. So at the every end of the design stage they just worked them into the general shape last-minute lol
I really like the colour that it is. Not super common or typical for this car but it looks really nice.
I love the route you are going with this build, and I freaking LOVE the rear set of wheels!! 😍😍😍
It's obvious you're all having a great time! Really glad you got in touch with your "Inner Hot-Rodder" and embraced the Murcielago! Can't wait for the next installment!
Definitely! I can't wait to see this finished and on the road! We have a charger we are starting on our channel soon. But this scratches the itch because the charger will probably take a while
I am so hyped for this build, awesome to see it running and driving, nice work guys!
I've been loving this build, something about it. I'd also love to see him take a few of the builds to the drag strip or the track. We follow along then don't see them any more. As our channel grows we hope to do more with the cars after they are finished. If they are ours it will be easy, but the ones that aren't we'll invite them to a track day or something
Awesome and outstanding as always.Thanks for sharing and taking us along
Love seeing that huge smile on your face. What a great job team! Looking forward to more.
B is for Build is really the pioneer of rebuild content. Those first BRZ videos that hit the algorithm there was nobody else.
Haha ya he was one of the first for sure! Love this channel. Hope my channel will see even a fraction of the success Chris has had
I was recently watching a Questionable Garage vid with Jared Pink (Who has your old drag race challenge car you did with Freddy) and he was talking to a battery expert, and they were saying that you need a special charger to revive a lithium ion battery if it goes into a low voltage state, and you cannot jump it with a normal jumper cable. So you may want to double check your plans on recharging the lithium battery if you ever do want to run it down to empty.
You should also do a manual swap on it, I believe that the transmission is the same just need to remove the electronics and install proper shifter! Would make it even cooler!
EAG European autogroup is building a conversion kit right now.
Here we go again with the same BS from people that have NO idea what it takes to manual swap a Murcielago....
@@joealex65what extra stuff do you need?
@@rj6110 the easiest way to say it is think of how simple Ferrari and Gallardo are, now do the exact opposite for the Murci. Even the transmission cases are different.
Both sets of wheels look amazing!
Great video bro!! Just saw the liberty walk murcielago kit at Tokyo Auto Salon, your car makes so much sense to do that kit.
Love this series !!!
I’m so excited for this car. Can’t wait to see it finish
Hi Chris, rebuilding a totally smashed Murcielago has really got my attention! Super interesting 👍
“It lives!!!!!🤪”
That was awesome especially love the rear wheels. Gonna be so sick when it’s done. Must hype responsibly though.
Huge congrats. Nice work.
I’m not mechanical at all but I just love this channel. True craftsmanship
Happy indeed! fantastic progress
Phenomenal work guys.
Awesome build. Agree with some of the other comments, let’s get an ASMR cleaning all the cars in the shop!
Bring them back!
Congrats Gents, great progress.
Blu Glauco would look great on the Merci! Looking forward to this one getting done, as are you!! You can’t hide your excitement on this one!!!
Always looking forward to seeing your work.
This car just has this effect on people. It's one of the best looking cars ever made in my opinion, my personal favourite. Those doughnuts looked effortless for it too haha.
Doing a great job with the videos guys
That looked like sooooo much fun. Very cool.
So awesome to see it out on the street and it sounds great!
Can’t wait to see the fabrication part of this build Taylor in the garage building is the best part of the channel
Looks cold there, keep warm guys
Yep! Clicked as soon as it dropped... b is for build video takes priority over any other 😂
Boom! Love a B is for build drop 💙
30:03 love the sound of that V12!!
Those rear wheels looks great!!!
Loving the content!!
I am SO jealous! Congrats!
You can totally mix the batteries. I have done it for years. I have a LIFEpo4 power supply with a deep cycle standard battery addon and its worked fine.
I love the idea and of a dark grey murcielago like we see in the dark night. Great build so far!
That thing is going to look so sick when it's done!!
Love the work you guys are doing on this Lambo. Matt olive green
Gratuleren great job! 👍🏻 😊
Man i ant wait to see this thing finished! as for the color I'd love to see the red come back to life on this car!
This car is gonna look sick in that Red with the wide body. I think it would compliment the cars lines and stance. But either way it’s a incredible build. It’s crazy seeing it take shape from what it first looked like.
Keep it red, but to add some extra juice - have a look at the Wall racing Huracan GT3 (basf inspired)
That red looks great
Digging the mount for the RWD conversion.
Not having a front mount after removing the diff doesn't create vibration. But it creates a pendulum effect as the remaining driveline mounts do not have a strong enough forward connection.
Been watching since the beginning days and local to your area. I love your content. Please show more about Oscar and Kyle, let the people know more about them! They work so hard and are obviously very talented!
You guys make one helleva team 👏🏻👏🏻👏🏻
So cool you brought that thing back
To all who complain that the entire shop is dirty and unorganized and stupid dirty its their garage so they can do what ever they wanna do with it if they please to. And there always in a rush to do shows like sema and other car shows and races and what not. If u dont like his content move along to another car channel 😅 i am staying cause i support b is for build as he also fought cancer and won 🏅 so please have some respect and decency for his time and dedication he just doesnt wanna bore u guys with all the time lapse he does if he did it the other way it would take over an hour to upload these types of vids thats why they timelapse and its team work not just one guy doing everything ❤
those donuts were effortless! can't wait to see whats next
Glad this is a restore, it’s such a rare car now
I'm so proud of guys hard work and you for rebuilding it and giving it a second chance to life this makes me so happy Lamborghinis are very dear to my heart, if you can keep it on its birth color it helps you retain value., also if you cannot afford the rear brake lights build a case out of fiberglass and customize your own lens and sort out your own pigtails to connect to the factory wire harness to avoid electrical problems and computer codes " please be advised" check out the voltage from the pigtails before you attach lights 🙏
You had such a big grin Chris! - Colo(u)r: - Skyline GTR MIDNIGHT PURPLE
One of my favorite builds on the channel in a long time
I love this build, but I also loved the mustang body swap, finally got to build the car he has been dreaming about and was sooo close before. We are just starting out on our channel. Hope to do a dream build one day!
Way to go B team!!! What a build!!! Well done!
This is sick. So glad it's going in the right direction.
Everybody should have an Oscar. Finish the dang overland truck!!!
That res that's on it is gorgeous. Something in that family would be killer for color.
Manual conversion is a MUST as well 😃
Glad you decided to rebuild the Murci, BTW Damon from DDE has one too, I think he has the computer / scanner, may have seen it on one of his videos,
Love this channel ❤
Great project and really presented well .. nobody else talks about the vibration issue caused by deleting the awd.
I love this series👌
B is for Build: We want to make mounting brackets for the rear bumper to maximize resale value
B is for Build: *Proceeds to chop the living hell out of the quarter panels and fenders*
The math checks out LOL.
When this is done, please take it out on track!🔥
Love the series, I think Fuscia would be a great color for it :)
Or that :D
Very cool. This is so much fun.
Always excellent work to you all at b is for build great team work enjoying this build
very nice build !
Those donuts were sweeeet!
i forgot what area you were from, it was crazy to suddenly recognize where you were driving! hope to bump into you sometime, that would be so cool! good to see the lambo running!
Bro that car is super dope man
Love your projects bro!
the tire combo looks so awesome ... should paint it midnight purple!!
Love this build
The wheels on the rear look dope!
Not like it counts, but I’d vote to keep those!
This car looks so wide already lol. I don’t know how much wider you guys are gonna go but I can’t wait to see 😁
Cool love the costume fab. Work ❤ 😂 other drivers were thinking what this crazy guy doing 😂 . Look forward to the final build.
The battery system you are putting in is pretty much the same idea as a house battery for something like an overland build. All you need is something like the Redarc DC-DC charger and it will keep both the Agm starter battery and lifepo4 house batteries isolated and charged
I was going to suggest a redarc unit as well
Keep it red and black , looks awesome.
Bump this Comment guys!
If the E-Gear is the same software as my Gallardo, you can pull both shifter levers for like 10 seconds and it'll reset the computer and re-learn the shifts as you drive it.
I think it was called electric grape and it was candy and dark. I think it would look absolutely stunning and would compliment both the black and chrome. Add some diamond dust to the clear so it gets a prismatic effect.