Product review Micsig DP10007 High Voltage Differential Probe 100MHz Probe Kit for oscilloscope
Vložit
- čas přidán 25. 07. 2024
- Micsig DP10013 100MHz 3.5ns Rise Time 50X/500X Attenuation Rate Oscilloscope High Voltage Differential Probe Kit 1300V
www.banggood.com/Micsig-DP100...
Micsig Oscilloscope 5600V 100MHz High Voltage Differential Probe DP20003 Kit 3.5ns Rise Time 200X / 2000X Attenuation Rate
www.banggood.com/Micsig-Oscil...
Best equipment to protect your oscilloscope from high voltages or main lines.
If you liked the video or if it was worthy to you, don't forget to give a LIKE. You can also Subscribe to the Channel for more interesting videos about electronics workshop.
Thanks for watching!
My gear:
Micsig DP10007 High Voltage Differential Probe 100MHz Probe Kit Sponsored by Micsig
Siglent SDS1204X-E 200MHz Digital Storage Oscilloscope Sponsored by SiglentEU dot com
- Siglent SDG2042X 120MHz Function/Arbitrary Generator Sponsored by SiglentEU dot com
- Uni-T UT71C 4000 Counts True RMS Multimeter Sponsored by Vitacom dot ro & Uni-T
- Uni-T UT502 Insulation Resistance Tester
- Fluke 8600A 4, 1/2 digit, Digital bench top Multimeter
- NEWCASON XC6013L Capacitance meter
- LCR-T4 component tester (1&2)
- HP8922M 1GHz Spectrum Analyzer (OPT 1, 6 & 10 installed)
- LTDZ 4.4GHz Spectrum Analyzer
- NanoVNA H4 1.5GHz Vector Network Analyzer
- 1.7GHz UV HF RTL-SDR Tuner Receiver
- ADF4351 4.4GHz RF Signal Generator
- HEATKIT IG 42 RF RF Laboratory Generator
- ZHAOXIN CD Power Supply TXN-1502D (1&2)
- GORDAK 952 SMD Rework Soldering Station (1&2)
- RADIOSHACK 22-812 Digital Multimeter
- MIYAKO 890G Auto DMM
- DT-830B Multimeter
- TM902C Thermometer
- TDGC2A 0.5KVA Auto-transformer
- HS1010 Light Meter
- ZOYI ZT102A Automatic Portable Digital Multimeter Sponsored By ZOTEK
- RIGOL DSO1051 50MHz Digital Storage Oscilloscope
- FG-050 Low Frequency Function Generator 65.5KHz
- DATA PRECISION 2480R True RMS 4, 1/2 digits bench top multimeter (1&1)
- BRYMEN BM318 Automotive DMM
- STEREN PROAM MUL-280 Digital Multimeter - Věda a technologie
I've had one of these for a while now. I'm super impressed with the price to performance especially compared to more expensive solutions.
Thanks for the review, in case the differential probe is not used, an isolating transformer can be used to isolate the power to the DUT and the oscilloscope separately.
Great review! Getting a DP10007 very soon hopefully 👍
Watching this made me lose hope i ever learn this trade.
Leaving comment to support.
The DP10007 is actually the best for 230V mains voltage mesasurment. Maximum differential voltage is a voltage at which the probe output voltage is at its maximum (the signal is clipped). It is not a maximum voltage you can connect to it. The DP10007 is CAT II rated at 600V so it can be used with 230V mains voltage and at the 100x setting the output voltage wont be maxed out, it will work just fine. It will measure voltages up to 700V. Also eevblog had a video about it czcams.com/video/V93Rnco-wKg/video.html
I've watched many of these differential probe videos, and have never seen a person hook one to ac source like a wall socket
FYI as it says on the sticker on its face, the probe is designed to output into 1 megaohm (typical scope impedance), and not terminated with a 50 ohm load.
It wasn't terminated with 50 ohms, it was connected directly to ch4 on the scope.
At Saelig in USA.
Supplier recommended in America for fast delivery: www.saelig.com/product/dp10013.htm
You said you connected to the output of the microwave, don't think so.
I got a dp10007 one. It's a terrible device. Its error at 20mhz reaches to 19%. In my test, it works well up to 670khz with an error lower than 2%. There is no way to open the enclosure to tune it. Just a waste of money and time.