I own several triplex pump machines including an electric AR brand that’s similar to the machine in the video. Very good explanation of the potentially fatal problem of leaking water.
It was received from the customer shipped back to us via UPS. He was instructed to put the transport plug in before shipping rather than draining the oil so we can see what we were dealing with. Good catch! They are shipped out this way with a tag reminding the dealer or customer to remove and install dipstick with breather. We have seen some pumps create enough pressure to push oil seals out during operation. Most often when that happens if unattended all the oil drops and pump will seize up quickly.... and in those cases wet end stays pretty intact.... not so much the back end!
The original red oil filler cap has not been removed and replaced with the yellow dip stick in accordance with the instructions that come with the machine. The red plug doesn't vent so excess pressure will build up on the oil side.
It was received from the customer shipped back to us via UPS. He was instructed to put the transport plug in before shipping rather than draining the oil so we can see what we were dealing with. Good catch! They are shipped out this way with a tag reminding the dealer or customer to remove and install dipstick with breather. We have seen some pumps create enough pressure to push oil seals out during operation. Most often when that happens if unattended all the oil drops and pump will seize up quickly.... and in those cases wet end stays pretty intact.... not so much the back end!
I wonder if the manufacturer has a recall on stuff like this cause if they are having so many like this I'm assuming that the manufacturer should have something to say about that
Maybe you would charge lower people would fix things. There is people in other countries fixing things up making faces smile ( Releasing Dopamine ) and living long happy lives.
Sorry just saw this. How is the water supply. Sometimes lack of water supply or restricted supply through a filter that need s cleaned can make a noise.
I have this same unit & when I turn it on, I just hear a buzz, no movement or anything coming from the unit. Any ideas what I can do to fix this? The oil is fine, no water in the crankcase.
It was received from the customer shipped back to us via UPS. He was instructed to put the transport plug in before shipping rather than draining the oil so we can see what we were dealing with. Good catch! They are shipped out this way with a tag reminding the dealer or customer to remove and install dipstick with breather. We have seen some pumps create enough pressure to push oil seals out during operation. Most often when that happens if unattended all the oil drops and pump will seize up quickly.... and in those cases wet end stays pretty intact.... not so much the back end!
@@sirus303 You need a water seal kit. Check for piston play while you got it off. I have an Annovi Reverberi RKV series pump and bought the water seal kit for $45 off eBay. I figured that the pump was so old I might as well replace the pistons too; that kit was like $77 shipped. Very cheap compared to spending $400 on a new pump. Again, just make sure you don't have wobbly pistons ("piston play") as the actual oil bearings might be shot thus require a lot more work. RKV series water seal kit $48: www.ebay.com/itm/223991911859 RKV series piston kit $77: www.ebay.com/itm/324053782649
The pump motor unit you see here is built by General Pump, Annovi Reverberi also makes an Itailian pump/motor combination. We have used both over the last 25 to 30 years and both are long lasting and durable. We use Annovi Reverberi, Cat, Udor, Comet and a few other pumps in our production. We like to choose pumps based on the applications they will be in. In some cases one manufacturers design may perform differently and may offer advantages to specific applications. Many times it is driven by customer preference, pricing, and parts availability that our customers have in geographic areas.
In most cases regardless of size, quality or maker of a pump, once you get into the rear end of the pump with repairs of crankshaft, bearings, connecting rods, plungers and additionally every seal being replaced you are approaching 60 to 70% the cost of a new machine. The parts and labor discussed during the video are at a retail level with a local shop doing the work. This cost of course is less if you are purchasing the parts and doing the work yourself but we still would not recommend the repair.... It is still throwing good money at a used machine. The 1500A is sold by distributors with prices starting as low as $759 with free freight. This machine is used in detail prep areas, commercial screen print shops and industrial applications many running 5 hours a day. We have spoke with some customers with applications well over 2000 hours of use with proper maintenance. This small hand carry pressure washer weighs 58 lbs and the cost, durability and dependability cannot be really compared to the DIY $399 machine. Many of which have no way to even change the oil, 250 hours or less and throw it away.
ok..this is really a useless video. i have water in the oil..obviously we all know that part and its not goid for connectung rods..duh....If you make a useful video about how to repair this in stead of wasting peoples time..pls update
I own several triplex pump machines including an electric AR brand that’s similar to the machine in the video. Very good explanation of the potentially fatal problem of leaking water.
I nearly fell out of my chair when you removed the cover to the crankcase
It was received from the customer shipped back to us via UPS. He was instructed to put the transport plug in before shipping rather than draining the oil so we can see what we were dealing with. Good catch! They are shipped out this way with a tag reminding the dealer or customer to remove and install dipstick with breather. We have seen some pumps create enough pressure to push oil seals out during operation. Most often when that happens if unattended all the oil drops and pump will seize up quickly.... and in those cases wet end stays pretty intact.... not so much the back end!
GOOD VIDEO -
Make Video of How to Replace Crankshaft and Connecting Rods or CRANKCASE Seals Replacement
Thank you
Вечная проблема молоко в картере! ЛАЙК!!!
Good Video
just Picked up a Used Ridgid RD80706 wth Milky Oil in tha CAT pump
will Tear Down and Inspect .
I have a rigid pressure washer and works perfectly but the cat pump oil turns gray like that
The original red oil filler cap has not been removed and replaced with the yellow dip stick in accordance with the instructions that come with the machine. The red plug doesn't vent so excess pressure will build up on the oil side.
It was received from the customer shipped back to us via UPS. He was instructed to put the transport plug in before shipping rather than draining the oil so we can see what we were dealing with. Good catch! They are shipped out this way with a tag reminding the dealer or customer to remove and install dipstick with breather. We have seen some pumps create enough pressure to push oil seals out during operation. Most often when that happens if unattended all the oil drops and pump will seize up quickly.... and in those cases wet end stays pretty intact.... not so much the back end!
Just wanted to know the fix before I took mine apart. Way too much info that most people have no use for. just my POI.
I wonder if the manufacturer has a recall on stuff like this cause if they are having so many like this I'm assuming that the manufacturer should have something to say about that
Mayonnaise, plus why is transport plug in it maybe that why it blew
Maybe you would charge lower people would fix things. There is people in other countries fixing things up making faces smile ( Releasing Dopamine ) and living long happy lives.
My pressure washer has a grey colour fluid leaking from the back (engine side) of the pump. what does this mean?
Probably water in the oil. Call 800.648.5011 in the morning. Tech can talk you through what needs to be done or find you a service center near you.
What couses of abnormal sound when pump is running or when it's near to stop running?
Sorry just saw this. How is the water supply. Sometimes lack of water supply or restricted supply through a filter that need s cleaned can make a noise.
I have this same unit & when I turn it on, I just hear a buzz, no movement or anything coming from the unit. Any ideas what I can do to fix this? The oil is fine, no water in the crankcase.
I have same washer but low water pressure
Call in to 800-648-5011 ext 1224, could be as simple as a worn nozzle.
What causes this to happen?
1:49 where do i find these white tubes or what are they called
those are the ceramic plungers. Call 800-648-5011 and use the parts prompt, they will help you get them ordered and shipped.
the midle
retainer ring is broken thats why is leaking
I'm with brad. Why the shit is the shipping oil cap still in place? No doubt you're gonna have problems.
It was received from the customer shipped back to us via UPS. He was instructed to put the transport plug in before shipping rather than draining the oil so we can see what we were dealing with. Good catch! They are shipped out this way with a tag reminding the dealer or customer to remove and install dipstick with breather. We have seen some pumps create enough pressure to push oil seals out during operation. Most often when that happens if unattended all the oil drops and pump will seize up quickly.... and in those cases wet end stays pretty intact.... not so much the back end!
hello . one question. i have a honda pressure washer., and is pump oil is getting water , are the seals that i have to replace???
You need a water seal kit. Check for piston play while you got it off.
Same problem)
@@sirus303 You need a water seal kit. Check for piston play while you got it off. I have an Annovi Reverberi RKV series pump and bought the water seal kit for $45 off eBay. I figured that the pump was so old I might as well replace the pistons too; that kit was like $77 shipped. Very cheap compared to spending $400 on a new pump. Again, just make sure you don't have wobbly pistons ("piston play") as the actual oil bearings might be shot thus require a lot more work.
RKV series water seal kit $48: www.ebay.com/itm/223991911859
RKV series piston kit $77: www.ebay.com/itm/324053782649
May be this kind of problem can occur with a poor quality water (high calcium) at an intensive use ? Like 8hour a day.
How do you remove a stuck ceramic tube
Call into 800-648-5011 and choose prompt # 4 (Service) and they will talk you through the removal.
Ciao, voglio l'indirizzo e il codice delle tue parrucche per informarti e trattare con te per favore
How do Can pumps compare to Annovi?
The pump motor unit you see here is built by General Pump, Annovi Reverberi also makes an Itailian pump/motor combination. We have used both over the last 25 to 30 years and both are long lasting and durable. We use Annovi Reverberi, Cat, Udor, Comet and a few other pumps in our production. We like to choose pumps based on the applications they will be in. In some cases one manufacturers design may perform differently and may offer advantages to specific applications. Many times it is driven by customer preference, pricing, and parts availability that our customers have in geographic areas.
$700 LOL! Fuck that
In most cases regardless of size, quality or maker of a pump, once you get into the rear end of the pump with repairs of crankshaft, bearings, connecting rods, plungers and additionally every seal being replaced you are approaching 60 to 70% the cost of a new machine. The parts and labor discussed during the video are at a retail level with a local shop doing the work. This cost of course is less if you are purchasing the parts and doing the work yourself but we still would not recommend the repair.... It is still throwing good money at a used machine. The 1500A is sold by distributors with prices starting as low as $759 with free freight. This machine is used in detail prep areas, commercial screen print shops and industrial applications many running 5 hours a day. We have spoke with some customers with applications well over 2000 hours of use with proper maintenance. This small hand carry pressure washer weighs 58 lbs and the cost, durability and dependability cannot be really compared to the DIY $399 machine. Many of which have no way to even change the oil, 250 hours or less and throw it away.
ok..this is really a useless video. i have water in the oil..obviously we all know that part and its not goid for connectung rods..duh....If you make a useful video about how to repair this in stead of wasting peoples time..pls update
If water is in the oil, and any run time on it that way....the cost to repair is beyond the cost of a new pump.