Hi Jack, at last a new video from you, as an old-timer spark I agree with you about showing non-sparks how to do the job properly, as you said they are going to do the job, so may as well do it the correct and safe way, Regards from Ray the old sod from North Wales.
Big up yourself Jack,nice work mate huge garden,got me Log-cabin/Man-cave coming in July can’t wait will be running sockets and lights inside,great watch as always,enjoy your weekend buddy.
Great video Jack,thoroughly enjoyed that,and good on you showing the proper procedure for the wiring cos as you say diy'rs will do it anyway as youtube is the first place people go to when they want to save money and have a go themselves,when I was a Motor Mechanic and Auto Electrician in 70's and 80's there was no youtube and some of the botched diy jobs I had to correct were downright dangerous,obviously not high voltage but dredded Scotchloc connectors feeding accessories left right and centre causing burnt out wiring looms and vehicle fires, and worst when it was mechanical with failing breaks etc,big up big pal
Your right Ricky mate, we used to do a local council contract and once saw an electric shower plugged in to a socket with a light switch under the shower head to turn the shower on and off, how they didn’t get killed or even burn the switch or socket out is beyond me 😂
Hi Jack. Thanks for another great video, nice to see you back. Where did you get the trunking pattress from? I can only get the ones with the round knock out from my suppliers. Would be handy to know for the future. Keep up the great video's.
You have got to be the first electrician stripping the new T&E cable as you would (and I ) with cutters how did you find it? Also, fair play for using the correct trunking adaptors it does make for a better finish. Was there no option to have the outbuilding on its own circuit from the consumer unit?
Yeah mint mate it’s class cable, I’ve done a few rewires in it already and it’s been ace. Strips as normal. Yeah trunking adaptors look a lot better finishes the job off nicely, there was an option but it would have ruined a lot of the garden and the fusboards were on lowest floor of house which was underground and as you can imagine by the garden, the house was mint As no plans to put electric heating in there we were all good with this option
Hi Jack Nice video , andyour right you may aswell show it all . I dont know what the mains into the house is ie TNC-s or what but assuming it is TNC-s should you not place an earth rod at the summer house and not connect the cpc at the fused spur? I know there is no right or wrong way to do this as so many sparks say different just wanted your take on it thx
I would probably rod it if it was this far away from the house and it was a metal building to be fair but aslong as the readings are fine and writhing limits I think personally it’s fine
I know it's not yours, but damn that shed is flimsy. Those pre fab sheds are so poorly made it's unreal. Great job on the electrics though. At least one thing is done correctly lol... Also, one more thing. I'm one of those DIYers who will do the work myself. I'll be installing a new garage unit into a new workshop soon. Would you test and sign? If so, how much? (I live in Willenhall, just outside Wolverhampton).
Hello sir and welcome, I watch ure videos 😂 I’m sure there is a deal that can come about as I need a couple of usb c replacing, one on a switch one on a tablet my sons broke 😂😂 drop me a message on instagram mate 👍
@@JRCElectrical haha nice mate. I don't use Instagram, is email alright? I'm sure we can work something out. It won't be ready for a lil' while though because I'm cheaping out and buying scrap timber lol
Jacks back! Whayyy😁quick question mate, do you think i could come along with you one of the days because I’m studying for my 18th edition as well as Level 3 city and guilds. But all the theory is annoying and i’d much rather see how things work in person. Keep up the work though mate, you’re smashing it!👌🏻
@JRCElectrical I'm going to do it this way ...the armourd cable cab I run that steait up through the floor and in to a socket on the shed .bypassing the external box ?
Also the socket i wanna run off is alread a spur of a fused spur .so would be no need to have an external one aswell .or would it be easier to use one ...i appreciate ur input 👍@JRCElectrical
@@JRCElectrical yeah unless I imagined it lol, keep up the vids , more on testing would be good, especially when and why don't get the results you were expecting to get and how to test to find etc , 👏
1mm...course is fine, modern lighting, doesn't draw much....only thing bothers me , 1 mm. is so delicate , slightest nick and your down to • 5 mm . / 1.5 mm. is that bit tougher... and if you do nick it... still plenty of copper....
Hi Jack, at last a new video from you, as an old-timer spark I agree with you about showing non-sparks how to do the job properly, as you said they are going to do the job, so may as well do it the correct and safe way, Regards from Ray the old sod from North Wales.
Hello Ray welcome back, yeah I thought why not 😂😂 cheers mate
U r a genuine guy who knows what he’s doing especially for the clients. Keep up the GEAT WORK!😊😊😊
Thanks David much appreciated sir
"So, you might as well learn how to do it properly". Amen, brother. Fantastic video without all the 'Hollywood' artistic BS. Subbed 👌
Legend Thankyou sir glad you enjoyed and welcome
Sweet potatoes jack, nice video and top installation !!
Thankyou as always 👊
JACK.. we've all missed you... LEGend that you are!
Legend Thankyou sir back with a bang 😂
Nice tidy job JRC, you know the builders is going to chop through the cable 3 times whilst digging the trench though don't you 😃😃😃😃
U just know it, makes me some more money tho fixing it 😂😂
Great information at a great price for the east!
Big up the East
Huge garden that.
Nicely done bro
Yeah lovely place mate Thankyou
Great work Jack, nice and safe, have a good one👍
Cheers Shaun
Big up yourself Jack,nice work mate huge garden,got me Log-cabin/Man-cave coming in July can’t wait will be running sockets and lights inside,great watch as always,enjoy your weekend buddy.
Cheers Tom fair play to you mate I bet ure buzzing for that 👏 thanks mate
Nice job, and well explained for non sparks.
Thanks Terry
You do like make me laugh Jack wiri armour with crocs on. Living legend. 😂😂 how do your mates not tell you off it.
😎 they no I’m a g brother that’s why 😂😂 they were in full safety mode so we’re all good
Nice one Jack, loving the vibe
Cheers Gareth 👊
Great video Jack,thoroughly enjoyed that,and good on you showing the proper procedure for the wiring cos as you say diy'rs will do it anyway as youtube is the first place people go to when they want to save money and have a go themselves,when I was a Motor Mechanic and Auto Electrician in 70's and 80's there was no youtube and some of the botched diy jobs I had to correct were downright dangerous,obviously not high voltage but dredded Scotchloc connectors feeding accessories left right and centre causing burnt out wiring looms and vehicle fires, and worst when it was mechanical with failing breaks etc,big up big pal
Your right Ricky mate, we used to do a local council contract and once saw an electric shower plugged in to a socket with a light switch under the shower head to turn the shower on and off, how they didn’t get killed or even burn the switch or socket out is beyond me 😂
🙈🤠
Big up yourself jack❤
Big up big d as always ❤️
Great video, thank you for the information. Much appreciated 😘
Thanks sean
Nice work young man, keep em comming
Thankyou sir
Big up
Big up az me mon
Hensel boxes nice 👌
Awesome aren’t they
Go on the boy, sorry been slipping! But back now! Solid install as always! Them boxes are loads better than wiska in my opinion!
Big up thanks dude, yeah the boxes are ace mate absolute game changer
Very informative 👍👍
❤️
👍
👊
Okay. The light behind that glass door will be a future problem. Would be better between those 2 left windows.
It would sir, they are putting a stopper tho so the door doesn’t open that wide, that’s where the customer wanted them, we had already discussed that
Hi Jack. Thanks for another great video, nice to see you back. Where did you get the trunking pattress from? I can only get the ones with the round knock out from
my suppliers. Would be handy to know for the future. Keep up the great video's.
Everything we use in videos is from rs electrical supplies and they delivery all over the country, get yourself some ordered dude
Big up the Noice king
Big up you sir
Do u not have to worry about the wood splitting after screwing into it when it expands and contracts
No idea, never though about it but not been told of a problem when I’ve done them in the past
Is it ok to just run 2.5 of the ring down to run all them sockets and lights, probs guna plug heaters in 🤔
Yeah it will be fine, I always ask if heaters are going to be used ever, if so a bigger cable would be taken back to the board to allow
You have got to be the first electrician stripping the new T&E cable as you would (and I ) with cutters how did you find it? Also, fair play for using the correct trunking adaptors it does make for a better finish. Was there no option to have the outbuilding on its own circuit from the consumer unit?
Yeah mint mate it’s class cable, I’ve done a few rewires in it already and it’s been ace. Strips as normal.
Yeah trunking adaptors look a lot better finishes the job off nicely, there was an option but it would have ruined a lot of the garden and the fusboards were on lowest floor of house which was underground and as you can imagine by the garden, the house was mint
As no plans to put electric heating in there we were all good with this option
Hi Jack Nice video , andyour right you may aswell show it all . I dont know what the mains into the house is ie TNC-s or what but assuming it is TNC-s should you not place an earth rod at the summer house and not connect the cpc at the fused spur? I know there is no right or wrong way to do this as so many sparks say different just wanted your take on it thx
I would probably rod it if it was this far away from the house and it was a metal building to be fair but aslong as the readings are fine and writhing limits I think personally it’s fine
I know it's not yours, but damn that shed is flimsy. Those pre fab sheds are so poorly made it's unreal. Great job on the electrics though. At least one thing is done correctly lol...
Also, one more thing. I'm one of those DIYers who will do the work myself. I'll be installing a new garage unit into a new workshop soon. Would you test and sign? If so, how much? (I live in Willenhall, just outside Wolverhampton).
Hello sir and welcome, I watch ure videos 😂 I’m sure there is a deal that can come about as I need a couple of usb c replacing, one on a switch one on a tablet my sons broke 😂😂 drop me a message on instagram mate 👍
@@JRCElectrical haha nice mate. I don't use Instagram, is email alright? I'm sure we can work something out. It won't be ready for a lil' while though because I'm cheaping out and buying scrap timber lol
Yeah sound mate drop me an email
@@JRCElectrical done bud, sent to your collabs inbox. Don't rush, get back to me whenever you're free
Will do sir 👍
Jacks back! Whayyy😁quick question mate, do you think i could come along with you one of the days because I’m studying for my 18th edition as well as Level 3 city and guilds. But all the theory is annoying and i’d much rather see how things work in person. Keep up the work though mate, you’re smashing it!👌🏻
Where abouts are u from mate
@@JRCElectrical the Dudley area, we have the same accent and use the same slang😂👌🏻
@@YoungBobby98 ooooo r
Message me on insta I don’t mind u coming when I’ve got something insteresting to do 😂😂
@@JRCElectrical sent you one mate😁
I just want to put a chest freezer in my shed ...will a extension lead not do lol
That will do perfectly 😂
@JRCElectrical I'm going to do it this way ...the armourd cable cab I run that steait up through the floor and in to a socket on the shed .bypassing the external box ?
@@Geeking-out fair if it’s run into a socket everything that’s plugged in is fused anyway if you only need 1 socket
Also the socket i wanna run off is alread a spur of a fused spur .so would be no need to have an external one aswell .or would it be easier to use one ...i appreciate ur input 👍@JRCElectrical
@@Geeking-out if it’s already off a fused spur then no, be sure to protect the cable from uv and any potential damage when outside tho
Where do you get those boxes from cobra?
Rs dragon
Easier putting on the shroud first dude. Class work though.
Cheers Shayne, always done it that way 😂😂
Hi jack, why 1.5 for lighting rather than 1.0mmm
It was 1mm
Did i say 1.5 😂😂
@@JRCElectrical yeah unless I imagined it lol, keep up the vids , more on testing would be good, especially when and why don't get the results you were expecting to get and how to test to find etc , 👏
@@garylatto4191 I shall get round to this sir thankyou
1mm...course is fine, modern lighting, doesn't draw much....only thing bothers me , 1 mm. is so delicate , slightest nick and your down to • 5 mm . / 1.5 mm. is that bit tougher... and if you do nick it... still plenty of copper....
@@tonywatson1412 agreed sir, a few times I’ve gone to nick the ends off and took the copper with me, good point sir
Where do you get those boxes from cobra?
Still rs dragon