How To Install Clear Safety & 🔒 Security Window Film 🔒 | WindowFilm.co.uk

Sdílet
Vložit
  • čas přidán 21. 12. 2009
  • The Window Film Company ® show you how to install clear safety and security window films.
    These fitting instructions will show you how to get a professional finish from your DIY window film installation.
    These glass security window films are great to assist reduction in smash and grab incidents, for school safety where large areas of glass are present in high traffic areas.
    You can find out more about clear safety films and window security film on our website at www.windowfilm.co.uk.
    We also have a full supply and installation service for all of our window films, window graphics and glass manifestation.
  • Jak na to + styl

Komentáře • 9

  • @PlasmaBiotic
    @PlasmaBiotic Před 12 lety +4

    Guys it was soooo easy! I have been setting myself to install these films for a year and it took me an hour to do 3 windows. No a single bubble! - the only different thing I did was i didn't spray over the film I was pulling off - only adhesive side and the window. Voila perfecto!

  • @yanchen5482
    @yanchen5482 Před 6 lety +3

    Why no silicone or gasket to be used to stabilize the window films?

    • @windowfilm
      @windowfilm  Před 4 lety +1

      No need for them normally - The adhesive, activated by the water does the job in most cases - Some installations we might use these methods to add stability >> www.windowfilm.co.uk/commercial/bomb-blast-protection/mdico-gullwing-anchoring-system or www.windowfilm.co.uk/commercial/bomb-blast-protection/madico-wet-glaze-anchoring-system

  • @JBfromKY
    @JBfromKY Před 4 lety +1

    Is it necessary to apply some sort of anchoring system - to connect the film to the frame - silicone, or adhesive strips?

    • @windowfilm
      @windowfilm  Před 4 lety

      The only type of film that we supply that requires anchoring systems are specialist bomb-blast protection films - we are a Madico SafetyShield Premier Partner ( www.windowfilm.co.uk/commercial/bomb-blast-protection/a-global-madico-safety-shield-premier-partner ), so offer the full range of films within that collection. Our standard films are applied with a water based application process, with no need for anchoring systems. For any further enquiries you can get in touch with us directly by calling 01494 794477 or email info@windowfilm.co.uk. We’re always happy to help.

  • @PTbodybuilder
    @PTbodybuilder Před 8 lety +2

    what kind of spray did they use? baby shampoo and water?

    • @windowfilm
      @windowfilm  Před 4 lety +1

      That correct :D - Baby shampoo or washing up liquid, just a few drops in to the water needed

  • @aegiscrash
    @aegiscrash Před 9 lety +2

    Do you sell in the USA?