❤🎉i want to start this i only hv a heat press but other stuffs i don't know n i just hot the heat press hvnt used it . please i need your on how to start what i need to start pls kindly help out
I have a Cricut that's been sitting in my office because i don't know how to use it. I want to do this but where can i get designs? I do not know how to design
My Cricut needle isn’t cutting thru on my iron on vinyl for T-shirt’s but it’ll cut thru the vinyl for car decals and stuff. Am I using the wrong setting? Is my needle too dull? I put it on iron on and used the custom setting and did vinyl iron on and still didn’t cut all the way thru.
I just got my Cricut and had the same issue. It would cut through cardstock but not vinyl. So, to fix the issue, I chose cardstock although I was using heat transfer vinyl. Worked perfectly!
When I discover the answer to this, I’m going to eat this world up!! My best suggestion for now would be go to a few thrift stores and find some blank ones, BC if you can find them you’ll know exactly what your inventory count is and it’s definitely going to be cheaper than whatever company you’re going to eventually find. Therefore, low overhead/production costs so you’ll be able to either sell it for more and keep most of the profit OR you can sell it lower which will incentivize the sale. In the meantime, I hope this helps. If you come about a wholesaler, come back to this comment and share. 🤞🏾✌🏾
@@TheRecipeWorldwide I ask because I have been doing countless research and more people seem to be having a problem with both the company and the product "cricut maker 3"
Have you made sure it’s on all the way? In my experience even with glitter if it’s not pressed all the way or settled it can peel Next time you do it with the protective sheet (that comes on the vinyl) press it at the same temp (around 350°f - 365°f) and do it for at least 15-20 minutes (MAKE SURE ITS LOCKED IN PLACE!!) Then after you finish take the protective sheet off and press it for another 10 seconds :)
YES!!!-But You will have to PRESS IT (iron) MORE TIMES & PRESS DOWN ON THE IRON WITH AS MUCH FORCE AS YOU POSSIBLY CAN WHILE IRONING -what I mean by that is if you notice in the video he says he only use the Heat-Press for a total of about 25-30-seconds, with an Iron it's going to be a TOTAL.of 3-5 minutes stretched out between 3-5 pressings(depending on the thickness of the fabric) ALSO you wanna put as much Force on the Iron as Possible while ironing--I hope that make sense to you-lol I can simplify but would have to wait till my Meds ware off-lol...
It’s more so becomes another layer, but there is types of vinyl that offer a DTG type feel. For washing instructions I washed in cold water and hang dry.
I need a detailed tutorial 😂
right he didn't even show to to put the vinyl on the mat and on which sides to put it down
Dude your content really helped me today! Gonna cop this machines from you
I wanted to start my own little side hustle doing this but not sure how to start
I’m new to the Cricut game, but old to being creative. Really enjoying and valuing your content bro.
Much appreciated!! 🙏🏼
How do you get the vinyl to last in the washing machine?
I love it
Great show
Please include the amount of pressure in your videos. Thank you.
Bro what font is that called?
What software is being used for your designs?
I need to know what design is that ? How do we get designs like this
Where do you get your blank hoodies
What hoodie blank is that and what manufacturer
Dope
Thank you! You got a clothing brand?
What heat press did you use??
What brand vinyl do u use that works with heat press?
Its heat vinyl
Hey what equipment you use
How long Does the pressing last before it's start getting off
Sweeet 🎉🎉
Where can I get the machines?
If you do not "mirror" it does it come out backwords? Im getting ready to cut and didn't know if I had to mirror.
What heat press are you using is it good for a beginner?
Where do you get your blanks at ??
Is it sublimation?
How long does it last ? Looks like it would peel off quick
do you recommend Heat Press or DTG for hoodies??
What brand is that hoodie? Or type of hoodie
NOICE!! 🎉
What heat press do you use?
Did you heat the hoodie for 3 - 5 secs?
❤🎉i want to start this i only hv a heat press but other stuffs i don't know n i just hot the heat press hvnt used it . please i need your on how to start what i need to start pls kindly help out
What’s the heat press called?
Does cricut 12 x 10 good with any hoodies and vinyl?
what vinyl is that
Which vinyl?
where we getting the blank two pieces from?
🔥🔥🔥🔥🔥🔥🔥
What temperature do you use
What heat press?
Where can I order plain black sweaters at?
Can you do a video of you making Wrestlemania 40 in Philadelphia
No
What app do you use for the design
Cricut design space
Is it okay for straight men to cricut
Bruh I need your help??? Trying start my first brand.
What cricut series is this
Where u get the hoodies
DO YOU GET GOOD SALES
How do you mirror?
Do you put transfer tape on the grip mat before you put on the vinyl?
No it’s lightly glued on there.
Hey bro .. HTV can be applied in a hoddie (60% cotton 40% polyester)?? Thanks
Yeah
Which cricut is yours?
Explore Air 2
Where do I find these
👏🏾👏🏾👏🏾👏🏾
Vinyl is annoying but a good way to practice
what was the barrier that was on your heat press?
It’s probably just a Teflon sheet
Which software do you use for crafts
cricut design space
Where do you get your hoodie supply from?
I help you about hoodie
I have a Cricut that's been sitting in my office because i don't know how to use it. I want to do this but where can i get designs? I do not know how to design
Design bundles, cricut, and Etsy.
I cant get my cricut cutterto really cut, on i cant do simple things like something easy like just a one word. Anyone here can really help me?
How much for this cricut ??
Where do you get the vinyl sheets
Any art store tbh
App?
I see you love the explore 2 do you ever think of upgrading just wondering
Yea definitely want to upgrade! Just saving my money up currently. 😁
Maker or explore 3?
@@christianarcos4333 I’m open minded to either or honestly.
@@TheRecipeWorldwide what do you think of the cameo 4?
@@christianarcos4333 dont do it
is 15x15 heating press would be good enough for that design size?
Yes
My Cricut needle isn’t cutting thru on my iron on vinyl for T-shirt’s but it’ll cut thru the vinyl for car decals and stuff. Am I using the wrong setting? Is my needle too dull? I put it on iron on and used the custom setting and did vinyl iron on and still didn’t cut all the way thru.
I just got my Cricut and had the same issue. It would cut through cardstock but not vinyl. So, to fix the issue, I chose cardstock although I was using heat transfer vinyl. Worked perfectly!
where do you get the hoodies from?
When I discover the answer to this, I’m going to eat this world up!!
My best suggestion for now would be go to a few thrift stores and find some blank ones, BC if you can find them you’ll know exactly what your inventory count is and it’s definitely going to be cheaper than whatever company you’re going to eventually find. Therefore, low overhead/production costs so you’ll be able to either sell it for more and keep most of the profit OR you can sell it lower which will incentivize the sale.
In the meantime, I hope this helps. If you come about a wholesaler, come back to this comment and share. 🤞🏾✌🏾
@@foreverrcococheneldid you find any?
Probably Gildan. Can bulk order from site and got damn near every color
What’s that blue machine name😊
Bettersub clam shell heat press
Do you sale these
What type of printer did you use
Looks like it's a cricut alone
Why the extra press?
I believe to make sure it's really adhered to the hoodie
wht font is that
Old English from Dafont.com
🎉
Can you put people walk the a bootle
Bruh what does this even say?
👏🏽👏🏽👏🏽👏🏽
Is the maker 3 or the explore 3 better?
It’s $100 cheaper. If you wanna save that money I’d get the 2. Works amazing
@@TheRecipeWorldwide I ask because I have been doing countless research and more people seem to be having a problem with both the company and the product "cricut maker 3"
I was able to do it on phone , I pressed mirror design and when I pressed next it said ‘Select An Accessory’ what does this mean?
How old are you?
12 , But I’m Pretty Brainy When it comes to certain tech.. but not shirts
@@BananaSplitRemastered…select your machine. Whatever device, pc you were using wasn’t recognizing/connected to your Cricut machine at the time.
Can I do it without teflon sheet
Yeah, but it’s not recommended
@@TheRecipeWorldwide why is it not recommended but you still use it?
@@Dkayyy_11 you need to re-read our comments. Your question does not make sense.
You can use butcher paper
Bro it’s so fucken hard to peel bro I don’t get it
What software is used to create the design
Cricut design space
Hey does the air 2 have phone or tablet software or is it purely off pc ?
I use my iPad and iPhone ! The app is called Cricut design space
@@TheRecipeWorldwide thank you mame!!!
make it cream, use cream for the hoodie
When you clean your hoodies that you print do they tear? When I do, it tears 😔
Have you made sure it’s on all the way? In my experience even with glitter if it’s not pressed all the way or settled it can peel
Next time you do it with the protective sheet (that comes on the vinyl) press it at the same temp (around 350°f - 365°f) and do it for at least 15-20 minutes (MAKE SURE ITS LOCKED IN PLACE!!)
Then after you finish take the protective sheet off and press it for another 10 seconds :)
@@aj-825 Minutes??
@@aj-825thanks
Why do people use the fonts as if they look good, dripping letters would even look better than this
Where can you get cheaper hoodies?
What cricut software do u use?
Design Space is Cricut’s software
Someone like my comment so I can come back to this video
App
how do you get that font on cricut?
You have to download the font then you can use it with design space.
@@T4Tracy2download from where
What the font u used on the hoodie called ?
Heartless on DaFont
@@blankzelo-2510TYSM ❤
@@LTL-7 np happy to hear i helped someone
looks like revenge font! what is the name of the font b?
does it work with a clothing iron if you don't got a heat press
Honestly I’ve used a iron before. It usually will only work with smaller designs. Just make sure it melts the vinyl enough when you do it !
YES!!!-But You will have to PRESS IT (iron) MORE TIMES & PRESS DOWN ON THE IRON WITH AS MUCH FORCE AS YOU POSSIBLY CAN WHILE IRONING -what I mean by that is if you notice in the video he says he only use the Heat-Press for a total of about 25-30-seconds, with an Iron it's going to be a TOTAL.of 3-5 minutes stretched out between 3-5 pressings(depending on the thickness of the fabric) ALSO you wanna put as much Force on the Iron as Possible while ironing--I hope that make sense to you-lol I can simplify but would have to wait till my Meds ware off-lol...
Do it yourself.
What all do I need to start my business or whatever
Or whatever?
I can sell you da Sauce if you serious shidd😂😂💯
Hey Bro, can you hook me up with some shirts and make me some of my CZcams channel?
does the vinyl fusion with the fabric? or the vinyl become another layer on the fabric? what about this vinyl method face up to washer and dryer??
It’s more so becomes another layer, but there is types of vinyl that offer a DTG type feel. For washing instructions I washed in cold water and hang dry.
Gib mi 1 pises pilis😢
Can you use iron😂
Yes I have and it work fine every time