How To Install a COMPRESSION Valve (Compression Fitting Tutorial) Copper/Plastic Compression Fitting
Vložit
- čas přidán 10. 09. 2024
- How to install a compression fitting
How to install a compression valve
Compression shut off valve installation
Compression fitting installation
KNIPEX 86 03 150 Pliers Wrench
amzn.to/2Ly6IPe
KNIPEX 86 03 180 Pliers Wrench
amzn.to/3optGGR
KNIPEX Tools KNIPEX 86 03 250 Pliers Wrench
amzn.to/2XpWeUO
KNIPEX Tools Pliers Wrench 3-Piece Set
amzn.to/3nnRLfW
RIDGID Tubing Cutter, 1/4-inch to 1-1/8-inch
amzn.to/3owmnx0
Milwaukee Cut 1 Dipped GLOVES L
amzn.to/3s8H18O
Oatey Pipe Joint Compound with PTFE with Brush
amzn.to/3hV7LoC
Enkay 17x23 Jumbo Self Healing Cutting Mat Hobby Tool
amzn.to/3s2Z7sG
Thanks for watching!
Email: JumperManTech@Gmail.com
Follow me on Instagram! @JumpRmantech
Thank you for an excellent presentation, concise, thorough and nicely explained.
One thing I noticed is the channel locks on the right that you were tightening with were backwards, if you flip them around they will clamp down much less effort to keep them gripped tightly to the nut/bolt, also on alot of pliers and wrenches with teeth the teeth are in an angle and the way you had them they can easily slip but flip them around and the teeth dig into the object your turning, just a pointer since I also got a few pointers from your video ,hope this helps you out sometime thanks
Should we always do 1.5 turns as he does? I thought half a turn was sufficient but some say it will blow off at half a turn only
Excellent demonstration. Interesting video. Great job JMT ⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️
Thank you Bogdan! Happy you found this video interesting. Compression fittings are very useful! Appreciate the comment🙌 Stay safe out there & stay tuned for new videos every week!
Thanks for the Tutorial..
*I would only suggest - Work on holding your slip pliers in the direction of Pinch(same as a pipe wrench) for maximum grip on fittings.
love your channel . you infor are always helpful thank you so much.
Thank you so much! I'm very happy you love the channel & you find it helpful🙂 Your comment is very much appreciated. Stay safe out there & stay tuned for new videos every week!
Great visiual material.
Thank you so much for this perfect vedio
You're very welcome! Thank you for this perfect comment🙂 Very much appreciated🙏 Stay safe out there & stay tuned for new videos every week!🔧
Wish you the best and great future with hvac service👍
@@Nab-Asn2803 🙏🙏🙏✌
Most don't turn the compression nut 1.5 times with a wrench after the nut is hand-tightened as much as they can by hand. They just turn the nut half a turn, and then the entire fitting blows off when they are at work or asleep, and $5,000 of water damage is the result. So I recommend homeowners use Sharkbite fittings instead, and push the pipe until they feel the 'second' click.
Can you get shark bites for copper tubing, I use them with pex and pb but didn't know you could with copper, and using the pressure fittings you need a hundred dollar tool to squeeze all the fittings to seal them onto both pipes your joining, and brazing is just inconvenient bc you are dealing with a torch and torches tend to make shit hot, a few things could go wrong in a tight attack or crawl space with a torchclose by and its just something you have to pay more attention to so it takes your attention off the job at hand
Stay away from shark bite fittings.
Thanks
Excellent thank you
You're very welcome & thank you Simo✌ Glad you like the video. Enjoy🙂 Stay safe out there & stay tuned for new videos every week!🔧
Those knipex work great lol I just recently bought those 4 in 1 combo wrenches you use and I love those for P/Ms tensioning belts etc only problem is the head doesn’t fit in tight areas but for belts it’s usually not a problem at all
Niceeee! I love this pliers wrench & I love Knipex in general. Very nice quality tools. Can't go wrong! Thank you for watching & your comment🙂 Stay safe out there & stay tuned for new videos every week!🔧
great info!! TY🤩
You're welcome & thank YOU! Your support is very much appreciated🙏 Stay safe out there & stay tuned for new videos every week!
Thanks!
What about putting the paste on the pipe before you put the compression fitting on so you get some in between the compression fitting and pipe?
Good video, but it lacks cutting an existing run of pipe and wedging this valve into it. Can't find a good video that shows how much pipe you need to cut away in order to slip the valve into piping that may not have a lot of give in it.
Me too
Great
There may possibly of leakage like this.
Is is possible to make flair near valve just like we do during connection of outdoor unit with copper pipe
These usually never give me a problem but if you have a little leak, just tighten down on the nut a bit more & it will stop👍 This is a compression fitting and not flare so flare will not work. It's a different type of nut✌ Thanks for watching Arif! Always appreciate your comments🙂🔧
I have to replace existing valve, that should be the distance between ends of connecting tubes?
You didn’t tighten down the second nut. Where do you grip it when you tighten down the second nut ?
very helpful, does it work with pvc or plastic pipe?
👌👌👌
Syed!!!!! Thank you my friend! 👍👍👍
just a one question I see you didn't rim the pipe is that ok
It's good practice to ream the pipe but you will be just fine without doing so👍 Personally, I never had an issue but it is good to do. Thank you for watching! Stay safe out here & stay tuned for new videos every week🙂✌
As you might know I am chill water tech my self I have watch all your videos 👍from st lucia
@@neilvestervictor180 Thats awesome! Yes👍 Thank you so much! I really appreciate that and your comments. It means very much to me🙏 I always wanted to visit your area. Sending blessings your way from NYC🙂
trust me you will love it Oprah Kevin Hart the list goes on love it down here
next vacation take a trip