Video není dostupné.
Omlouváme se.
Restoring the engine of the beast (part 1)
Vložit
- čas přidán 23. 05. 2019
- Finally making some progress on rebuilding the 38,8 liters V12 Norinco diesel engine out of our Iraqi Type 69-II tank.
Technical components: www.indi.nl
▼Click here for more!▼
This type of engine is also known as;
kharkiv v2
v55
transmash
Behind the scenes & more?
Check out our 2nd channel; Werkplaatsvlog
Follow me on:
Facebook: / mastermilo82
Instagram: / mastermilo82
Merchandise: shop.spreadshi...
Website: mastermilo.com
Hey folks, all video's on the main channel contain footage of the 'Werkplaatsvlog' channel. That's because that channel has almost all raw footage & more behind the scenes footage. The video's on 'Werkplaatsvlog' have a delay of one week on the actual record date at the moment. But we want to get it more up to date, so we can react faster in the videos on comments.
Ha mensen, alle video's op het hoofdkanaal bevatten beelden die ook op het 'Werkplaatsvlog' kanaal te zien zijn. Dat komt omdat dat kanaal de ruwe beelden bevat & achter de schermen beelden. De video's op het 'Werkplaatsvlog' kanaal lopen momenteel ongeveer een week achter op de opname datum. Maar we willen dit meer gelijk trekken, zodat we sneller in video's kunnen reageren op comments.
I love Werkplaatsvlog channel... more details on the daily routine work.
A smaller temporal delay would be cool.
Greetings from France 🇫🇷
good, i watch the videos on werkplaatsvlog as soon as they come out even if i dont understand amything :D
Maak een nieuwe intro met de tank erbij
Please, add English subtitles for your secondary blog too. I'm still waiting for weeks old videos to be translated to finally figure out, whats happening with your tank :,(
If you guys start that I won't know whether to shit or go blind.
Milo in 2009: i created junk from a thing.
Milo in 2019: I created thing from a junk.
Hahahah yeah that is right
We are here since the beginning to see him rise!
Future episodes: Can you shift a tank in reverse at full speed
Or weld bars and make RollTank xD
Wiptank
Will my tank run on fabric softener and pancake syrup
@@MrDemonchild71 Tank engine running on WD40 and paint the tank in the WD40 can colour
@@pilot554 that would break youtube
liked just because you kept your video 9:56 and not 10:01 with 6 adds in the middle
yea but if he does it its oke he deserve the money
Or you can download uBlock origin. No more ads! :D
@@Edje666 support him restoring a tank are not cheap
@@muhammadsuryaarbi5568 For sure! But as long as there are enough views the ads don't matter. And I view it
also i wouldn't mind if he put ads, his content isn't clickbait or 90% filler like most of other mechanic channels do, he deserves it
I cant understand almost every word you are saying but:
The universal language of your engine coming together beautifully is there lol
Don't understand your language, but you have big balls taking on a massive project like that. Great work. You have brought history back to life . Not the best history but history none the less.
Despite the fact that I can't understand a single thing you guys say without the captions, your channel is one of my favorites.
Always appreciating rebuilding old and broken machines! Keep up the good work!
I'm really looking forward to see this engine running 👍
Just the engine??
I want to see the whole tank running again!!
I like the gear driven timing, much better than crappy belts or chains.
andypdq But gear driven cam’s will decrease it’s mileage by like 0.2% so the efficiency rating will drop at least 5 labels.
Still very common on industrial diesel engines.
Russian ZMZ53based engines, and all Russian UMZ engines have 2 gears in stead of the belt... One gear on the crank, the other on the camshaft and you're done. The benefit of this is that if your gear is worn out you will hear is long before it's too late, and you have enough time to replace it during your next week/month.
I saw Diesel?? Forever brave dog! Good job buddies..
Maybe it may seem strange, but I miss Diesel. It was not my dog but I loved watching it in the videos playing with the piece of wood. Milo continues to making this videos that we enjoy so much. Cheers from Puerto Rico 00773
Amazing. Lots of aluminum components on this diesel.
In this episode we rebuild the tank engine featuring *the worlds noisiest squitry bottle*
the noisiest bottle is also the one that holds lubricant inside xD
eigenlijk is het gewoon SUUUPER gaaf dat jullie zoeen stukje geschiedenis herstellen...
Ik vind geschiedenis altijd super boeiend, en het maakt wie wij allen nu zijn....
Prachtig werk!!!
I'm so impatient to see the final rebuilding episode of this engine
Ja jongens dit heb ik ook al in de werkplaatsvlogs gezien 😂
EEstar en toch hebben we het al gezien
0:30 DIESEL!
Doggo rip
inderdaad dacht ik ook al
Zo heerlijk hoe jullie dan gewoon lekker rustig aan alles los halen en gewoon lekker nuchter zijn, favoriete serie op yt ♥️👌
hands up who cant wait to see the finished tank rolling out the shed!
Door deze videos heb ik altijd een hekel aan vrijdag niet dat ik ze niet leuk vind maar als ik hem af heb gekeken moet ik een week wachten tot the volgende
czcams.com/channels/J0BEW0Jsc8cK0STZlC4zlg.html
This is a huge project! Enjoy every video... Thanks Milo and the team!
Steel and aluminum don't have the same expansion/contraction rate. If you use a heatgun (not a torch) and heat the aluminum around the sleeve, the head will expand and will apply less pressure on the steel sleeve. It is then be easier to remove the sleeve...
Het mooiste stukje van de video is dat ik diesel nog even zag❤️
Heren goed werk!! Jullie geven mij veel tips & tricks om met mijn eigen project door te gaan. Ook het maken van speciaal gereedschap om onderdelen los te maken heb ik door jullie onder de knie gekregen!
This engine going in the opel? 🤔
No this is de tank engine....🤔
Jan van den Bos true 😯
Please the opens frame wouldn’t support it. It’s dropping right into that yellow toy car
It would be the first front-mid-rear engine car in the world
Это двигатель с советского танка Т34
Wat een geduld hebben jullie.
Mooi zo doorgaan.
Oude afleveringen bij elkaar van de werkplaatsvlog 😂✌️
Idd jammer weer
@@MCdrivein ja je wilt ook voorgang zien elke week, maar je hoeft dat niet dubbelop te zien
@@maarten8742 Moet je de werkplaatsvlog niet kijken
Die is juist bedoelt voor extra unedited spul
Gaan ze natuurlijk niet alles daar uitknippen
Volgensmij snap je het principe van het werkplaatvlog kanaal niet?
I'm really looking forward to seeing the heads and block being skimmed and I can't wait to hear it run 😍
Gewoon nog een keer. Melasse voor die tracks! Lekker twee weekjes laten weken.
Ziet er retegaaf uit, blijf zo doorgana
Looks like Sadaam was a bit lax on changing oil!
That engine will be one hell of a beast when it's all back together and running... :D
Big Important Thing! A Wooden board to block the air intake if the engine ‘runs away’ on startup :o)
What happens if the air intake isn't blocked and that happens?
@@jadenhirst9230 Look up diesel engine runaway... CZcams is full of diesel runaway videos, and wikipedia has an article about it.
Actually that wooden block sounds like a great idea, I don't think they will replace the piston rings, and they probably won't get this engine too an ideal state, so the risk of a runaway occuring is pretty high for this project.
They really rev and either melt or explode :) On rebuilt engines one person would work the starter and fuel and the other had wood block and rag soaked in petrol, depending what it needed :D@@sasjadevries
Love this part! Modernize that engine with some new Bosh system xD
Milo, ik vind het serieus geweldig wat jullie doen!
Outstanding work you Milo and Dirk!
can we call it "thomas the tank engine"?
yes
No
Hi, you are Belgian? I’m Belgian I love your videos, I watch your channel since before the fire of your old workshop
Nederlander.
Wow crazy project !!!! A lot of parts needed for an old engine.
ziet er goed uit man!! ga zo door!
hou van de video's man, vind het ook leuk dat je de video juist onder 10 min hebt gemaakt ! Keap up the good work ; )
Absolute madlad! Als je m af hebt zou je een keer bij militracks moeten langskomen met je tank! Zullen veel mensen vast waarderen!
Excellent job so far on the engine! Well done Milo.
Your videos are fun to watch like the engine teardowns would like to see ya'll do an airplane engine tear down just an idea anyway keep up the good work.
Hatseflats! Vet cool hoor deze motorvlog ;) Dit gaat helemaal goed komen. Maare voor nu een heel fijn weekend
Now that’s a proper V12
Brabant zal trots op oe zen milo!
Ik wel tenminste!
Was waiting for this one thanks master milo🔥
You guys are AWESOME!!!!!!!
DON'T EVER EVER STOP YAH!!!
The restoration i have waiting for has released.. Tq mastermilo for the video.. Padu boss..
leipe video weer!!! Ik hoop snel de tank werkend te zien !!
Well restoring this Rusty mess sure Will he hard but i'm sure you'll Pull it off
I have my doubts that this thing will ever run again.
Hey can you make so that the handbrake is used as the accelerator thanks!
You guys are awesome, thats a badass engine, what is it?
Ooh dat spuitflesje man... Ik vind het knap als je dit echt goed aan de gang krijgt, succes met de build
A little investment in a vapour blaster and a glass bead blast cabinet would make some short work of restoring a lot of those parts
4:30 fighting cylinder liners is still better than liners dropping by it self during run like on the Isuzu-V6 which Opel chose for my Signum.... fatal damage for the block and cylinders.
failing engines is a trademark of opel.
Can't wait to hear the Engines roar!
Not even watched it yet. But COOL this is what I've been waiting for!
I LOVE THIS SO MUCH THIS IS MY DREAM!!! YOU ARE AMAZING MILO
JA, dit is de aflevering waar ik op hoopte!
Zit toch nog een 2e leven in de motor! VET.
will this fit in my Honda??
ik zou vragen aan die gast waar je die uitlaatspruitstukken van hebt of je die moter op die kar mag testen dan weet je zeker of die werkt en daarna pas in die tank monteren
Whole lot of work.
Need a crossover video with hydraulic press guy for those cylinder sleeves.
Wow ik zie jullie kanaal nu pas. Echt supervet hoor. Ik weet hoeveel werk het is dus echt topwerk👍🏻
Milo, can you make a **Roll-Tank** ?
Holly shit that amount of work !!
Erg gaaf dit om te zien .ga zo door manne
mas que saudade de voces. gosto muito de seus videos .não somem naõ. abraços pra voces.
I thought you were going to disassemble it completely! Why not?
These guys are rebuilding an ancient, rusted engine while I can't figure out why my 50cc 2 stroke moped isn't sucking any fuel from the carburetor...
Sproeier verstopt?
Pik, benzine kraantje staat dicht..
@@ritzevespa Yeah no, there IS fuel inside the carburetor, where the floats are, it drips down when I tilt it to the side, but when trying to start, nothing comes out.
Like if it didn't have enough vacuum or somehing...
@@nickmeijer4940 And I have unclogged the nozzle, I can see light through it.
You should also put the 4 last tank videos on the tank playlist ;)
As always very interesting without understanding a word👍👍
Well, turn on the subtitles?
That would be a good solution👍👍
Yes that was the dog Diesel in the video (r.i.p.). Milo has a new dog called Luka. The guard dog ;)
vous etes de bons mecanos
Dual overhead shaft driven camshafts with 4 valves per cylinder... Impressive
Great work. And the dog is site engineer...😎✌️👍...!
Deze video is ouder omdat je diesel nog zag, nog sterkte en je hebt hebt het beste kanaal ooit🙃🤩
lads, you need to invest in a dry ice blaster.
Can't wait to see the next part 🧐
Ohh sehr cool!! Sieht aus wie ein großes Projekt!
Hallo meneer Milo, ik volg je al 4 jaar vanuit Syrië en ik hou van jullie allemaal. Ik heb een suggestie wat als we deze tankmotor op een la
Smangat om ditunggu tank nya
Want to see that engine running!
1200 cubic inches, 2 miles to the gallon, 400 horsepower and 900 ft/lbs torque
3:55 dan kun je beter de moeite nemen om een groter hoekprofieletje te maken en er een dop op te zetten
good job would like to see A tiger engin rebild
fantastic people!
great work !
Took me a couple of seconds to remember that I can’t actually understand German, I’ve been watching so many of these videos..
Tlijkt wel zo mooi schoon als nieuw
V12 engine?
Yes it is
Yes, says in description its a 38.8 Litre Norinco Diesel V12.
@Michael Jordan garage 54😂👌
@Michael Jordan Garage 54 is a YT channel from Siberia that builds crazy things like a car with a truck engine...
Last year Garage54 traveled to the NL and actually met mastermilo in real life.
@Michael Jordan That would be amusing, however, Im not sure a 39L V12 will fit in a normal car...
I cant wait to see the result
hi mastermilo82, I like these types of videos keep them coming.by the way, could this motor in this video possibly be used as a world war 2 fighterplane aero engine,or is that all together a different type of engine.what would one have to have done with this engine to make it into a world war 2 aero engine
Change the heads. there are no spark plugs in this eng. and not enough room to add them.
Did you check main bearings or lap valves?
Prachtig werk jongens!
ik weet dat ze veel werk hebben, maar wil toch wel graag weten wat er met de Gaz M20 is gebeurd
Niet om bijdehandt te klinken maar ik hoop dat jullie met het erafhalen van de brandstofpomp goed hebben opgeled. Welke uitgang van de pomp naar welke verstuiver ging