Installing A Light Bar On A Harley Low Rider ST
Vložit
- čas přidán 11. 09. 2024
- As the Custom Dynamics Light Bar is not 100% ready for a plug and play installation on the Low Rider ST a "work a round" is pretty easy to perform to get the job done. Torque Custom Cycles in Hackensack NJ helped me out on this cosmetic install. I think the outcome is really cool !
- Yellow Light bar - www.motorcycle...
Shop installed - Torque Custom Cycles
221 Gracie Pl, Hackensack, NJ 07601
(201) 880-6440
If you'd like to be involved, help and support - Check it out here:
My new Patreon page - www.patreon.co...
=====================
Find more information , Merchandise and contact me forms on my website - holyshift.us/
Follow my Instagram : / holy_shifttt
FaceBook Page: / holyshifttt
----------
Bikes set-up
Gray Ghost - 2022 Low Rider ST. FXLRST
Custom Dynamics LED's:
- Front amber turn signals -www.motorcycle...
- Lay Down license plate frame - www.motorcycle...
- Plate frame with LED illumination -www.motorcycle...
- Yellow Light bar - www.motorcycle...
Stereo/ Audio System - RockFord Fosgate - www.harley-dav...
Riser that I installed -
This is the Harley upper clamp needed - HD Part #55900106
Klock Werks windshield 8' Bronze - www.motorcycle...
Forward control conversion - I used the chrome forward controls - by Harley - Part Number: 50700061
And powder coated them Vivid black !
Harley floorboards for fat boy 115th anniversary edition.
Billet aluminum shifter peg - amzn.to/3LaG3o5
Mustache Engine guard by Harley Davidson - must add the:
Signal light bracket - Harley adapter kit - P/N 47200927 - www.harley-dav...
Seat -
Saddlemen Touring step-up seat. Tuck & Roll design with back rest - www.motorcycle...
S&S Tear Drop Air Cleaner - www.motorcycle...
Exhaust -BASSANI 2-INTO-1 STAINLESS SUPER BIKE MUFFLER -www.motorcycle...
Vented transmission cover - www.motorcycle...
Pretty badass setup. Also pretty badass you picked a fig right off the tree before your ride.
Just ripe and sweet !
Looks like you almost showed your garage code unintentionally. Great upload as always.
That is a nice installation video. Glad the shop let you be in there. Always good to see how the Pros do it. I have all Custom Dynamics on my 2023 SGS, love that company!!!
That light looks so good. I love how it’s hidden.
Yes I agree , you can’t see it from up close…
Congratulationd Glen!!!!!!!!!!!!!!!!!!! Light looks great Sandy!!!!!!!! Peace guys!!
Light look great 😊 congratulations to glen 👌
I have the same light bar, and it’s definitely for looks. Functionality wise, powerbanks has a better setup 👍
Looking good!
Ridi’n the Storm Out‼️
REO SPEEDWAGON 70’s! Ha
Looking forward to this video 🤙🏻
Hi 👋, Nice job guys, 😂 , I did notice somebody else passed the same comment about the fender, coming up and hitting the light,
Some to keep your eye 👁️ on, Stay Safe, Phil from the moulin,
It will hit the fender. I've made a few brackets for those light bars and even tite to the lower tree they can still hit.
Please subscribe
Definitely mainly for looks because its not a true Amber LED lightbar because its just a painted lens with a white LED light bar. Check out the MOONSMC Dual Function lightbar which can switch from White too Amber.
Looks great man ride safe and enjoy. Always enjoy watching.❤❤❤❤❤❤❤❤❤❤❤❤
Did that BMW come with a gift card to Starbucks, man purse, and a man bun? lol congrats nice bike.
Looks fantastic man!
I dig it 😁😎
Glenn, I'll take your road king???
No, you want my road king is staying right where it belongs in my garage! Thanks for watching!😂
🤣 You guys riding this weekend? It's going to be a good one. jonny V
Hey Sandy
Looks Sweet......and Stands Out 👍🇦🇺👍
Light looks good and you put a different kickstand on there. It looks different than the one I got on mine. I got a 24 low ST if you didn’t send me the link I’ve been looking the bike leans way too much.
Was that the RT 17 BMW dealer, bike looks supernice Sandy............
DAMM IT ! .... Now i have to buy another light . LOL Light is life on a bike .
Looks sharp! Did you get the mustache guard from harley?
Good video. Light looks good
Awesome install! I’m thinking of doing the same on my 23 FXLRST, is the brake line block hitting the light at all especially when you turn the bars left to right at maximum?
Great videos you’re doing your bike!
Cool light. 👍👍👍👍👍👍
Clean
Thanks for showing everything and a bunch of tinkering but not show how the light looks at night lit up. Great vid
careful I know some hit on the fender during a bad bump i had to use the tucker speed mount on mine but mine is a 2020
Please subscribe
The light bar looks great on the Lowrider ST, just curious as to how much it would cost to do something like that.. Plus the new K1600B looked good, but the old one had the 719 rims that are a $2000 upgrade from the basic rims, and the sissy bar had to be a little pricey as well to just give up.
Wasn’t interested in the rims again didn’t want to pay the $1850 extra! Also, the back rest was an eBay purchase 125 bucks so I wasn’t interested in that either getting back rest luggage rack combination! But thanks for watching!👍💯🇺🇸😎
Looks good 👌
Typical light bracket is designed too low where it can be contact the fender when front end dives in. How is your experience with your set up so far?
No problem!
Yep, plenty of people on the lowrider S forum that have bottomed it out and dented the front fender if not lifted
Looks cool Sandy, can you make a video when you are going to service the Goldwing?
Soon yes
Is the TURN ON signal wire the RED one?
Seems like glene loves his bmw k1600b! I’m debating on trading in my Harley for a bmw k1600
Phenomenal bike !
Great video! I am installing the same light on my Harley Davidson 2023 Street Bob 114. Initially, I was going to tap into the high beam of the headlight, but after watching you video I decided to always have the light on. After you encountered any traffic law restriction of always having said light lit?
hi bro, do you have the color codes? I want to install it, ty
If you weren't putting this video on CZcams he wouldn't have soldered that wire, it would have been scotch locks. Thank goodness he knew you were putting this out for everyone to see so he did the right thing. But he could have used liquid electrical tape.
We solder everything. Don’t even have a scotch lock in my shop.
@@TorqueCustomCyclesThen I rescind my comment and they should be against the law also 😆
Please subscribe - haha youre not subscribed... gotcha !
@HOLYSHIFT yes I am! Lol
good video. mike sometimes reminds me of artie lange - i mean he's not as funny but kind of looks a little like him and def sounds like him when he talks.
Question for you Sandy - you dont think there is any chance that if you hit a very large bump in the road that the shocks could compress enough to hit your fender - do you ?
I don’t know about the bump- time will tell
@@HOLYSHIFT i mean, is that a concern for you. did you try to push down on the front forks to check for clearance? the only reason i'm asking is i'm considering doing the same thing to my low rider st but if there is a chance it could contact the fender i def wouldnt do it
It looks real nice. I like your upgrades. I got a letter from HD about the rear shock recall for my 2020 Heritage did you get the letter?
Letter didn’t arrive. But My bike needs the fix
Nice ⚡️
Hello I was curious what your bronze brake/clutch levers were from?
Please subscribe - OEM levers painted Bronze
nice !!!!
Hey my add a light or two on your rear safety
Is that awesome looking seat higher than the stock seat? I'm looking for something an inch or 2 taller
Please subscribe
How do your new neighbors like your cam and Sawicki?😜
😂 love it ! Especially at 6 Am
Bar looks great....who makes your helmet?
on Amazon. called Daytona
Please subscribe
Does the light bar hit the front fender ?
Subscribed?
What riding jacket/shirt is that?
Beyond riders Kevlar mesh - use “HolyShift “ discount code
yeah buddy one pot hole and youre gonna dent the crap outta your fender.
Seriously dude what's with the flood light ? Can't see ?
I put one on my ST. The light being mounted to the triple tree moves with the bars at night during turns. I can see much much better going around corners or tight loop merges onto the hwy at night. Also the yellow helps a ton if there is fog which there always is near the river where my place is at night. It's well worth it for how cheap it is.
Is he going to keep his expensive Remus pipes?
Those are inexpensive freedom mufflers! Thanks for watching and asking!👍💯🇺🇸😎
@@glencross4461 But you had Remus on there if I remember correctly, or not.
@@Donfleebie1 no it was freedom exhaust!
@@glencross4461 well, whatever, it sounded good. Ya going to keep it.
Was trying to come up with a new channel name for when we start doing motovlogs. Was gonna be me and my buddy in midevil gear riding hardtails called " Yee Holee bikers" cause weve both had plenty of bones leave nice holes in our skin as they were ejected😂😂😂😂
Just found the channel. Love it. Keep it coming motobro!!!!