Warrior Wednesday! Engine And Rear Axle Install
Vložit
- čas přidán 29. 10. 2019
- Follow along on the Warrior 350 rebuild!!! Thanks for watching!
My Instagram: / mrturbo458
Use these Amazon Affiliate links below to help support the channel!
All Balls Racing Swing Arm Rebuild Kit:
amzn.to/2PqFr1b
Warrior 350 Chain And Sprocket Replacement Kit:
amzn.to/2ovgRkH
LED Shop Lights (used in this video):
amzn.to/33az4mo
Thanks for watching!
Be sure to check the description for parts links! Thanks for watching!
Beautiful ❤️
Awesome bike.
Thanks!
Is this axel been good so far??? Thank you btw my favorite new to me channel lol
How many inches does the yfm350 swing arm measure at full length and width?
Will blaster axle bearings fit on warrior?
I have the same rear axle in mine I just picked up and it has side to side play any insight?
Just installed the same axle and it ring and but are a nightmare to big for the space on the axle it's on but ehhhh
I just picked up the same axle for my blaster. I'm confused as to how the axle nut is tightened. The outer nut just tightens against the inner threaded sleeve? The circlip holds it in place from coming apart?
Basically yeah. It's just kinda hopes and dreams on that circlip. I haven't looked at it in a while though so I'd have to look at it again to give more detail.
Hi, I have just bay one of the axle, and fit it on my yamaha raptor 350 and my wheel hubs don't fit on the new axle, what wheel hubs did you use on the new axle?
I used the ones on my warrior 350
Do YOU have the links for the axle
Would this work for a raptor 350
Where Can I Get That Axle?
Your axle the Tusk or Niche??
Where can I get that axle. How can I find it ?
Hey I have 350 warrior and my kid took out before I had it Finished there was no chain tensioners or brackets on it it Road fine but then he put his friend on the back gunned it and the axle twist it now I can pull it by hand I got it home without the chain popping do you think it broke the carrier barrings? Or when I mount the bracket for the tensioner n put them on it will no ok???
It depends on what happened. If the axle itself is twisted, you'll probably have to cut it and pop it out. Riding it without the chain tension set probably isn't a good idea. Carrier bearings are probably ok, but without seeing it it's hard to say. Good luck, ride safe
What rear shock are you gonna use?
It's covered in one of the videos. It's a Raptor remote reservoir shock
Where did you get that axle?
eBay!
Is this an extended swing arm?
Factory swing arm, wider axle.
What carb u going to run frc??
Just the stock mikuni for now.
I want to do frc carb soon off yzf250
@@crsbke4524 Let me know how it works!
you powder coated the frame an swingarm. then throw back in a dirty asf rear shock, dog bone, an linkage!!!!
Fn' A right