In my experience, theyre great. Make sure to knock a punch dent into each side of the pully, or press it out and locktite it. This will negate any negative effects of these pulleys (the bearing walks out)
@@gasparfernandesantunes3568 oh dear, maybe it doesn't translate too well but my comment was a light-hearted jokey quip when everything else in life is just too serious 😉🤦🏻♂️ right, I'm off to Alibaba to buy some bike parts......💨🤭🤣
This "GOOD or GARBAGE" shorts series will feature 5-6 cycling products that I’ve purchased. After I’ve thoroughly tested ALL the products I’ll post a FULL length follow up video sharing my opinions on them. Watch the whole series here: czcams.com/play/PLbR1IgZFmavtC8UvV3nmrZUUCavR9FzBd.html
Stick with the stock - these pulleys won't last a 1/10 of the life of just stock pulleys. The friction of the bearing is so negligible, as the pulleys aren't under direct load.
Haha only have a few rides on them so far. Most people who dislike them in the comments says they will fail at around 6 months so we’ll see. So far I can’t say they are any louder or better then stock pulleys but they look cool 🤷♂️
I have ceramic pulley in my shimano altus m2000 those are great pulleys and its serve me well its been 1year and half since i have that pulley but isell that pulley with my altus i have a new rd now the stock pulley of my new rd is good but not giving the speed i want im ganna buy a new ceramic pulley for speed Sorry for my bad grammar
Hard to say. Depends on application, manufacturer, quality of materials. In general it seems for mountain bikes that plastic and aluminum are most commonly used
@@TheDustyDutchman I will add that yours looks very very nice especially matching up with ur rear cassette it looks so clean. I mainly don't care bc I have no motivation to match stuff with my bike already so mismatched
These are good, I dont know what this guys on...!?! But for low budget upgrades, they are fine, so long as your rear derailleur is set up correct these will last way longer than those stock spindles, protect your cassette and roll with way less resistance. This dudes a hater!?! 🤷♂️
@@TheDustyDutchman"You have to clean them more" "They weight the same as stock" "They spin the same as the stock ones" No mention of durability in comparison to stock, no mention of the fact they are lighter, and roll better, less wrok for the derailiuer, will out last stock Nylon spindles!?! Epic failure in metioning these details, to top it all, "would i buy these again, No"
I also said they do what they claim and they look sick. The rest is just my subjective opinion other than the weight. The only actual negative thing I said was that the anodizing is wearing off. We clearly have a difference in opinion in what “trashing/hating” is lol
Watch the FINAL RESULTS VIDEO HERE! czcams.com/video/cYtpYTD2tZ0/video.html
GUB are the best
👍👍
Many tooth on the big one bro ?
Do you still use them?
@twanpeters yeah they are still on my bike
Jrc pulleys are great. The hybrid ceramic bearings are sealed unlike every other affordable option
Go to hear! I’ll run them for 6 months or so and then take them out and inspect them. Interested to see the results 👍
In my experience, theyre great. Make sure to knock a punch dent into each side of the pully, or press it out and locktite it. This will negate any negative effects of these pulleys (the bearing walks out)
Oh interesting. I’ll keep an eye on that 👍
Good tip thanks had the same issue
Aluminum pulleys are ok just don't last long ,but they do add bling
agreed
Sick indeed....!!! They look good...
Agreed. But time will tell if they are quality. 🤔
Cheap bike parts are like cheap partners..... They don't tend to last long, they give you constant hassle and are just plain old cheap.
🤣🤣🤣
Not all but it is often the true you just need to make careful choses
Very well said 🙌
@@gasparfernandesantunes3568 oh dear, maybe it doesn't translate too well but my comment was a light-hearted jokey quip when everything else in life is just too serious 😉🤦🏻♂️ right, I'm off to Alibaba to buy some bike parts......💨🤭🤣
Much appreciated 👍
i got a few sets of some cheap ceramic pulleys that spin forever and i could tell the difference. i run 8/14 and also run 11/11
That’s rad 🤘
This "GOOD or GARBAGE" shorts series will feature 5-6 cycling products that I’ve purchased. After I’ve thoroughly tested ALL the products I’ll post a FULL length follow up video sharing my opinions on them. Watch the whole series here: czcams.com/play/PLbR1IgZFmavtC8UvV3nmrZUUCavR9FzBd.html
Good find. Looking forward to this!
Thanks! Me too 👍
Really pleased he said they basically weigh the same. 👍
Haha 👍
Stick with the stock - these pulleys won't last a 1/10 of the life of just stock pulleys. The friction of the bearing is so negligible, as the pulleys aren't under direct load.
That makes sense. I’m excited to see how long they last 👍
How are they holding up ? About t to order but waiting for your 2 week review so far !!!🤙🏻
Haha only have a few rides on them so far. Most people who dislike them in the comments says they will fail at around 6 months so we’ll see. So far I can’t say they are any louder or better then stock pulleys but they look cool 🤷♂️
Always save the old ones….. especially if their new.
I always save old parts. 👍
I have ceramic pulley in my shimano altus m2000 those are great pulleys and its serve me well its been 1year and half since i have that pulley but isell that pulley with my altus i have a new rd now the stock pulley of my new rd is good but not giving the speed i want im ganna buy a new ceramic pulley for speed
Sorry for my bad grammar
That’s good to hear. I’m also hoping for a good result. Thanks!
The stock pulleys are very low-quality. I had the exact same ones on my bike.
Nice! I like mine so far 👍
Which jockey wheel is good plastic, rubber, aluminium,or alloy ?
Hard to say. Depends on application, manufacturer, quality of materials. In general it seems for mountain bikes that plastic and aluminum are most commonly used
Me personally, as long as it does the spinny spin idc
Hahaha I love it! Well said 👍
@@TheDustyDutchman I will add that yours looks very very nice especially matching up with ur rear cassette it looks so clean. I mainly don't care bc I have no motivation to match stuff with my bike already so mismatched
Lol fair enough man! Appreciate the complement 🙌
They must be good because they are emerald green!
Haha right? They def have the bling factor 💎
💍SPINNERS💍
👍👍
"Sick" ? Yeuch !
🤘🤘
Metal polis make more noise
I haven't noticed that yet.
Jrc is to mountain bikes what ceramic speed is to road bikes
🤘🤘
Ceramic bearings arent better than steel and how much they spin without load is irrelevant
Right on 👍
Where's the link
The link to the pulleys is in the description. The link to the results video is pinned in the comments section
do they work with Sram Axs?
Not sure. I put the link to the Amazon listing in the description. That should tell ya 👍
Awesome looking!????
🤘🤘🤘
Are they good?
So far no issues. They don’t make any extra noise and seem to work fine 🤷♂️
I seen pulley wheels like this crack.
Awesome! I’m excited to see if mine fail too. For science 👍
Run shimano. End of discussion
Shimano is ok. I prefer sram
Garbage
So far I disagree. I prolly got 3-400 miles on them and they still work fine 🤷♂️
I'm from India will you give me 21speed gear set
Thanks for watching!
Get a job kid. Be a man
These are good, I dont know what this guys on...!?! But for low budget upgrades, they are fine, so long as your rear derailleur is set up correct these will last way longer than those stock spindles, protect your cassette and roll with way less resistance. This dudes a hater!?! 🤷♂️
They do what they claim. Reasonable cost, decent bearings, and they look cool. They are definitely staying on my bike.
@@TheDustyDutchman You trashed em bro... !?
What did I say that’s so bad about them? I literally own them and run them on my bike 🤷♂️
@@TheDustyDutchman"You have to clean them more" "They weight the same as stock" "They spin the same as the stock ones" No mention of durability in comparison to stock, no mention of the fact they are lighter, and roll better, less wrok for the derailiuer, will out last stock Nylon spindles!?! Epic failure in metioning these details, to top it all, "would i buy these again, No"
I also said they do what they claim and they look sick. The rest is just my subjective opinion other than the weight. The only actual negative thing I said was that the anodizing is wearing off. We clearly have a difference in opinion in what “trashing/hating” is lol