Great video Mike, thank you. trying not to be a Hassel-nerd, but the "C" lenses were the second lens range that Hblad made, there were the short-lived 1000F and 1600F cameras with focal plane shutters and their special range of lenses before the 500C came out. Victor Hasselblad travelled to Germany and managed to persuade the Compur company to make the between lens shutters for the new camera, but they insisted on retaing the patents to the shutter design, which is why all the "C" lenses have "Compur" engraved on the lens barrel, and that is also what the "C" means on the first range of lenses for the 500 series of cameras.
I've only had the early 80mm and 250mm 5.6 but recently i bought a distagon 50mm f4 and am so happy to be able to shoot wide. Only problem is corner focus when very close, hence why they made the FLE. thanks for the video, someday i will have a 120 or 150 and teleconverter to round out my collection :)
Thanks for this. Just came over from your rff suggestion. Now I get it. Surprising how difficult it was to nail this down using reg internet sources. Great job. I'll watch your others.
Yes, the CF lenses will work just fine on the 500c. Generally you can use the letter 'c' in both lens and camera name to determine that. Another example: a CF lens will also work on a 201F or a 2000FCW body. However, an F lens will not work properly on a 500c or 503cxw, etc. This naming pattern works fine most of the time, but there are some very small wrinkles here and there (see the comment below about CB lenses, for example). Glad you enjoy the vids!
C stands for Compur, the shutter in the lens. And the focal plane V body pre-dates the leaf shutter system with the 1600F in 1948 which was before the 500C (1957). Leica calls it central shutter. Hasselblad calls it leaf shutter.
I own 80mm 2.8 CFE wich came in kit with my 501CM. I aded 50mm CF FLE. Now considering to complete my kit with 150mm Sonnar CF. Nice set-up you have there sir!
CB lenses are a less expensive version of CF lenses. CF lenses are versatile because they work well on both 500 series (because they have a central shutter) and 200/2000 series cameras (because they have a special "F" setting on the shutter speed ring to lock out the shutter). CB lenses don't have this feature. I think there are other minor differences, too, but can't think of them at the moment.
You're most likely describing the DoF preview slider. Slide it down (away from the flash sync hole), and it closes the lens down and locks. "Rock" it (push in on the bottom half) to unlock. Takes a bit of getting used to.
great video, but as some feedback, you also forgot one difference between C and CF lenses, that is the apature stop down process, the CF has a sprung switch, which falls in a latch, holding the iris at selected setting, the C lenses, have a 'push switch' which enables this feature, HOWEVER, to disengauge it, you must return the apature ring to full open to recock the button's mechanics; the CF all you do is press on one side of the lever, it then automatically returns home, with spring pressure.
one other benefit of cf lenses is that the outer bayonett is 67 mm on ALL of them, and is compatable with the pro shade 6093 T which allows you to use this for all lenses 40mm -180mm and just extend the bellows, no need to buy separate shades for each lens, this is important, as the shade stops glare.
I just ordered a 50mm C T* for 340$. It seemed like a good deal so I decided to order it. I'm getting my first roll of velvia back soon so I'll do a video on my Hassy.
Very good review Mike. I own the 80mm, and I am looking into acquiring more lenses. I have found your review very helpful (hm, that 60 mm now sounds interesting). So thanks.
I believe the 'C' is actually implying 'Compur' which is the name of the leaf shutter in lenses, eventhough Hasselblad manual always refer to it as 'Central'.
Good video... If you like medium tele, I can suggest you also the 180 mm lens... I can say that, even if the focal lenght is a little more than the 150 mm, the difference is really visible. I love the perspective effect that it gives, it justify to buy it. Thanks, bye :)
Probably better to get a more useable 80mm, but it really depends on your shooting style. The 50mm feels a bit more special-purpose to me. The 60mm f/3.5 is a very special lens and can replace the 80mm for many situations, so it's worth considering.
another tip, gained from 'the Hasselblad way'-1 st ed. is that the c lenses can be used on the flex-body, arc body and bellows, as the shutter cocking knob on them has a twin press feature, little known about, BUT allows you to 'close' the shutter after the focus period, before exposure functions start; extremely useful with the digital backs, as they have an always open architecture, and this is needed to fire the electronic shutters in them as well without horrendous overexposure of the film/ image.
@@ChrisM-yq2pq no, one would assume a need for one, as it is the Digital BACK which needs it, aka to signal the chip inside to start the capturing phase; what my comment is getting at, is this feature gives time to stop, and hit the 'e-shutter' button on the back, at least on some models, or the "wakeup" cable, to give the requisite 5 sec. to finish the shot cycle, by hitting the shutter the second time, opening it, for the leaf shutter exposure. the closing of the shutter is an ADVANTAGE, as it covers the energised sensor, preventing dust accumulation, saving work in post.
I suspect you're correct, but it depends on what sources you read and believe, as I've seen it both ways. Let me ask you: what does the 'C' stand for in a CF lens, which has a Prontor shutter? Anyway, regardless of historical correctness, it's useful to remember that lenses with a 'C' have a central shutter. I rest my case. I would have demonstrated an F lens if I'd had one at the time, but I didn't, so I just explained the difference. I do have one now. Too late :-(
I bought one today after loading the film .. I saw on the screen of the room, many blacks dots .. I tried to clean .. but every time I made a shot came out more and more .. for me and that is the seal around the mirror ...
Nice overview, Mike but where is you pro lens shade? The pro lens shade allows all of these lenses to shine. I have the 80, 120 and 180CF lenses. I had the 50 CF FLE and that is an awesome lens. Nice pics and thanks for sharing.
The HC lenses pale in comparison to the V-series optics at least as far as build quality is considered I have seen several videos detailing there use of Plastic gears in the Autofocus Drive system it's not even a USM type of motor in this day and AGE? and the basic 80mm retails 2600 USD, but they shouldn't even be associated with the CF series built like a tank and Quality Optics geez ther also made by FUJINON BTW Mike very smart of you the get the 110mm FE lens you it is my favorite of the 200 series and most sought after, sadly out of my price range Cheers
I got a 50mm for my Mamiya, that's sorta my landscape camera. Maybe I'll try to trade in my 80mm and get a deal on a newer T* that's easier to read. I'll see about the 60mm.
Stop press, the first lenses was NOT C lenses ! It was F lenses woitout shutter which was in the camera Hasselblad 1600F. later 1000F, later came the 500 C.
Originally NONE of the 1000/1600/500/200/2000 series was never called the "V"-series !!! It was after Hasselblad had shifted owners several times it unfortunally got that description. By the way the shutter inside the lens is called a Leaf shutter ;) The older versions C leafshutter lenses had only one spring the newer CF lenses had two springs.
A well-explained and detailed review of lenses. One question: when you use a C lens (with built-in shutter) on a camera that already has a shutter, what Hasselblad body would that be?
Any of the V-series with a 2 as the first number: 2000fc, 2000fcw, 201f, etc. These are all focal-plane bodies. They are my preferred body as most of them have fast shutter speeds of 1/2000 (except for the 201f, at 1/1000), so they're more useful in outdoor shooting.
Hallo! Would you consider doing a presentation"how to make a self-portrait" using Hasselblad (old) C lenses (with V setting); the shutter is in the lens, the mirror and rear-curtain must be raised (press toggle under the winder); it should work
Very informative video. Thanks. My question is you mentioned that the C type lens can be used on a focal plane body by putting them on a bulb setting. Can you please provide more info on how to do this. I'm trying to use the lens on my Canon EOS 7D with an adapter. However even if I manually change the aperture on bulb setting, I actually don't see it adjusting when I look through the lens. Am I missing something? Please advise and any info would be greatly appreciated. Thanks.
Well, I agree that doesn't sound right. Unfortunately, I don't have any C lenses laying around any more to compare for you :-\. I'll check in my Wildi book (which you should really have, if you own a Hasselblad), and see if there is any more detail, and get back to you.
Hi Mike, I have noteiced that u don't seem to use UV filter on your Hasselblad lenses. Is there a reason? Lately, I've been told to get one - For protection use. But I'm not sure it would help much... Any view on that?
I am agnostic about filters. If the lens came with one when I bought it, I use it. If it didn't, I don't add one. I guess I won't go out of my way to put cheap glass in front of expensive glass, but I also won't go out of my way to take it off :-)
Mike have you seen the image quality difference between the 150mm CF and 150 CFi? I noticed there was a huge price difference. Wondering if you know if its worth the extra price.
Did you write me on flickr, too? If not, that's a crazy coincidence. I wouldn't spend the additional money on a CFi lens. You could buy another lens, or backs, or a tripod, or ... with that money!
Yeah I did Mike. After writing here I realized it might not be too wise to comment on a 5 year old video. Thanks for replying to both, you are a kind man sir. Thanks - Dan Lincoln Harris
+FanaticDrummer I don't have any experience with H lenses, but I assume the mount is not compatible with C/CF, etc. lenses for the V series. Perhaps there are adapters, though.
I can very highly recommend the 200/2000 series Hasselblad cameras and specially the Zeiss Distagon 50mm 2.8 and the Zeiss Planar 110mm 2.0, for the 110mm get also the 2x Zeiss Mutar or the late 2x of Hallelds own it gives a very good 220mm 4.0 with great close focus ! The 50mm have a very good close focusing down to 15x15cm ! The Zeiss Tele-Tessar 350mm 4.0 are also very good as the Zeiss Macro Planar 120mm 4.0, off course the Hasselblad SWC with 28mm is also very good. www.hasselbladhistorical.eu/HS/HSTable.aspx
I would recommend CF lenses, as they work pretty nicely on all types of Hasselblad V-Series bodies. However, they are a bit more expensive. There aren't really any "cheap" Hassy lenses, unfortunately, but if you stick with 80mm and 150mm, and get something a little ugly, they aren't too bad. Check KEH.com for prices, if you haven't already.
I haven't owned one. I believe it's a simplified/lower-end design. I don't believe Hasselblad/Zeiss ever bothered to make a poor lens. If you're doing portraits and general shooting you'll probably never notice, is my guess.
Thank you for the reply Mike. Can you explain the proper way to operate the depth of field lever on the 80mm cbt lens, I can't find any user manuals. How should it be set for regular use? Thanks again for the help.
teflonprimate I haven't actually handled a CB lens. I assume it has the same sort of slide-lock for DoF preview as the CF lenses. You kind of slide it into a locked position to shut down the aperture, and then tilt it to unlock it and it slides back on its own. You should leave it "off" for most situations, since you'll want to have good light to focus, and you can often estimate DoF without using the lever (it can get pretty dark with the DoF preview on).
+Hamid Ghorayshi I'll make a guess and say "yes" with an adapter, and possibly an effective focal length change. They would of course be fully manual. Probably best to do a Google search before up and buying a bunch of H lenses to run on your 503, though!
+Mike Thomas Thank you for your fast reply. I already searched the web to find an adapter for H to V but couldn't find any. There is some available for CF to H body. If you know any link, please forward.
+Mike Thomas Thank you Mike, There could be a technical reason for it. May be the new H Lenses need to connect to power not only for focusing function, but the aperture.
It sure would have been nice to see close ups of the lenses instead of sample photos so we could really get an idea of the specifics and comparisons to the other lenses...that's why I chose your video! disappointing!
Great video Mike, thank you. trying not to be a Hassel-nerd, but the "C" lenses were the second lens range that Hblad made, there were the short-lived 1000F and 1600F cameras with focal plane shutters and their special range of lenses before the 500C came out. Victor Hasselblad travelled to Germany and managed to persuade the Compur company to make the between lens shutters for the new camera, but they insisted on retaing the patents to the shutter design, which is why all the "C" lenses have "Compur" engraved on the lens barrel, and that is also what the "C" means on the first range of lenses for the 500 series of cameras.
I've only had the early 80mm and 250mm 5.6 but recently i bought a distagon 50mm f4 and am so happy to be able to shoot wide. Only problem is corner focus when very close, hence why they made the FLE. thanks for the video, someday i will have a 120 or 150 and teleconverter to round out my collection :)
Those images are amazing Mike, the subject matter and the quality. I imagine they're even more eye popping in person. Loving the channel. Cheers.
Thanks for this. Just came over from your rff suggestion. Now I get it. Surprising how difficult it was to nail this down using reg internet sources. Great job. I'll watch your others.
Yes, the CF lenses will work just fine on the 500c. Generally you can use the letter 'c' in both lens and camera name to determine that. Another example: a CF lens will also work on a 201F or a 2000FCW body. However, an F lens will not work properly on a 500c or 503cxw, etc. This naming pattern works fine most of the time, but there are some very small wrinkles here and there (see the comment below about CB lenses, for example).
Glad you enjoy the vids!
C stands for Compur, the shutter in the lens. And the focal plane V body pre-dates the leaf shutter system with the 1600F in 1948 which was before the 500C (1957). Leica calls it central shutter. Hasselblad calls it leaf shutter.
I was sort of expecting the 100mm F3.5 to be mentioned as well ;)
I own 80mm 2.8 CFE wich came in kit with my 501CM. I aded 50mm CF FLE. Now considering to complete my kit with 150mm Sonnar CF. Nice set-up you have there sir!
CB lenses are a less expensive version of CF lenses. CF lenses are versatile because they work well on both 500 series (because they have a central shutter) and 200/2000 series cameras (because they have a special "F" setting on the shutter speed ring to lock out the shutter). CB lenses don't have this feature. I think there are other minor differences, too, but can't think of them at the moment.
Nice overview. And a very appropriate T-shirt for this video! Thanks.
Thanks for this, finally made some sense of the different lens types for Hassy.
You're most likely describing the DoF preview slider. Slide it down (away from the flash sync hole), and it closes the lens down and locks. "Rock" it (push in on the bottom half) to unlock. Takes a bit of getting used to.
great video, but as some feedback, you also forgot one difference between C and CF lenses, that is the apature stop down process, the CF has a sprung switch, which falls in a latch, holding the iris at selected setting, the C lenses, have a 'push switch' which enables this feature, HOWEVER, to disengauge it, you must return the apature ring to full open to recock the button's mechanics; the CF all you do is press on one side of the lever, it then automatically returns home, with spring pressure.
one other benefit of cf lenses is that the outer bayonett is 67 mm on ALL of them, and is compatable with the pro shade 6093 T which allows you to use this for all lenses 40mm -180mm and just extend the bellows, no need to buy separate shades for each lens, this is important, as the shade stops glare.
I just ordered a 50mm C T* for 340$. It seemed like a good deal so I decided to order it. I'm getting my first roll of velvia back soon so I'll do a video on my Hassy.
Thanks for your comment. Glad you found the video helpful!
Very good review Mike. I own the 80mm, and I am looking into acquiring more lenses. I have found your review very helpful (hm, that 60 mm now sounds interesting). So thanks.
I believe the 'C' is actually implying 'Compur' which is the name of the leaf shutter in lenses, eventhough Hasselblad manual always refer to it as 'Central'.
That's the Arkansas river, which you may recognize as a huge kayaker's paradise.
Thanks for your comments re my photos.
Good video... If you like medium tele, I can suggest you also the 180 mm lens... I can say that, even if the focal lenght is a little more than the 150 mm, the difference is really visible. I love the perspective effect that it gives, it justify to buy it. Thanks, bye :)
Great overview. I just picked up a 80mm T* CF for $365. One more piece closer to having a full kit. Just need a focusing screen and a film back.
Cool way to do it. Possible because the system is so modular. Enjoy!
Probably better to get a more useable 80mm, but it really depends on your shooting style. The 50mm feels a bit more special-purpose to me. The 60mm f/3.5 is a very special lens and can replace the 80mm for many situations, so it's worth considering.
So you're mostly right. I *believe* they will work with a 200/2000 camera, but you have to use the B setting as with C lenses.
another tip, gained from 'the Hasselblad way'-1 st ed. is that the c lenses can be used on the flex-body, arc body and bellows, as the shutter cocking knob on them has a twin press feature, little known about, BUT allows you to 'close' the shutter after the focus period, before exposure functions start; extremely useful with the digital backs, as they have an always open architecture, and this is needed to fire the electronic shutters in them as well without horrendous overexposure of the film/ image.
No need for wake up cable??
@@ChrisM-yq2pq no, one would assume a need for one, as it is the Digital BACK which needs it, aka to signal the chip inside to start the capturing phase; what my comment is getting at, is this feature gives time to stop, and hit the 'e-shutter' button on the back, at least on some models, or the "wakeup" cable, to give the requisite 5 sec. to finish the shot cycle, by hitting the shutter the second time, opening it, for the leaf shutter exposure.
the closing of the shutter is an ADVANTAGE, as it covers the energised sensor, preventing dust accumulation, saving work in post.
Nicely explained!
Been fitting medium format lenses to my A7II lately - nice results - just ordered the Blad 150 f4 for a ridiculously low price on ebay.
what adaptor do you use??
@@intagphotovideo Using a K&F adapter - Blad to Nikon - then attached Nikon to Sony adapter - works great. Will do a review soon.
excellent overview
I suspect you're correct, but it depends on what sources you read and believe, as I've seen it both ways. Let me ask you: what does the 'C' stand for in a CF lens, which has a Prontor shutter? Anyway, regardless of historical correctness, it's useful to remember that lenses with a 'C' have a central shutter. I rest my case.
I would have demonstrated an F lens if I'd had one at the time, but I didn't, so I just explained the difference. I do have one now. Too late :-(
Seems like a very good deal. I love the 50mm. Heck, I love all Hassy lenses :-)
@thecommercialedge IIRC I got it at cafepress. Search for 'photography'. Tons of cool photo-geek shirts!
I bought one today after loading the film .. I saw on the screen of the room, many blacks dots .. I tried to clean .. but every time I made a shot came out more and more .. for me and that is the seal around the mirror ...
The C in C-lens is stand for 'Compur' shutter, not center shutter...And I thought there is some demonstration on F-lens?
good content bro. greetings from Brazil.
Nice overview, Mike but where is you pro lens shade? The pro lens shade allows all of these lenses to shine. I have the 80, 120 and 180CF lenses. I had the 50 CF FLE and that is an awesome lens. Nice pics and thanks for sharing.
Good point! I never had one, though - I just had the FL-specific plastic hoods 😬
The HC lenses pale in comparison to the V-series optics at least as far as build quality is considered I have seen several videos detailing there use of Plastic gears in the Autofocus Drive system it's not even a USM type of motor in this day and AGE? and the basic 80mm retails 2600 USD, but they shouldn't even be associated with the CF series built like a tank and Quality Optics geez ther also made by FUJINON
BTW Mike very smart of you the get the 110mm FE lens you it is my favorite of the 200 series and most sought after, sadly out of my price range
Cheers
Prefer snapping with CF focal lengths. 50mm & 150mm
You're welcome! Please check out my other vids (there are lots of them).
That's a bummer. The 60 is amazing, IMO. Some of my fave shots are from that lens (I guess that's true of all of them, though).
Nice bookshelf! `Diff sonnar distagon`?
amazing stuff 🎯
Thanks for this!!!
I got a 50mm for my Mamiya, that's sorta my landscape camera. Maybe I'll try to trade in my 80mm and get a deal on a newer T* that's easier to read. I'll see about the 60mm.
Stop press, the first lenses was NOT C lenses ! It was F lenses woitout shutter which was in the camera Hasselblad 1600F. later 1000F, later came the 500 C.
Originally NONE of the 1000/1600/500/200/2000 series was never called the "V"-series !!! It was after Hasselblad had shifted owners several times it unfortunally got that description.
By the way the shutter inside the lens is called a Leaf shutter ;) The older versions C leafshutter lenses had only one spring the newer CF lenses had two springs.
A well-explained and detailed review of lenses. One question: when you use a C lens (with built-in shutter) on a camera that already has a shutter, what Hasselblad body would that be?
Any of the V-series with a 2 as the first number: 2000fc, 2000fcw, 201f, etc. These are all focal-plane bodies. They are my preferred body as most of them have fast shutter speeds of 1/2000 (except for the 201f, at 1/1000), so they're more useful in outdoor shooting.
Thanks for your prompt response!
Viktor D. No problem. Happy shooting!
Hallo! Would you consider doing a presentation"how to make a self-portrait" using Hasselblad (old) C lenses (with V setting); the shutter is in the lens, the mirror and rear-curtain must be raised (press toggle under the winder); it should work
Sorry, I no longer have any 'C' lenses, and my bodies are 20xx series bodies (rather than 500-series), so I can't do a demo :-(
how many mounts does hasselblad have so far ?? To confusing while buying mounts for canon
I agree, but the 80mm is in bad cosmetic condition you can barley read the shutter numbers and none of the EV numbers.
i just got a 80mm cf lens what is the rubber left and right button for next to the flash synch hole?
Very informative video. Thanks. My question is you mentioned that the C type lens can be used on a focal plane body by putting them on a bulb setting. Can you please provide more info on how to do this. I'm trying to use the lens on my Canon EOS 7D with an adapter. However even if I manually change the aperture on bulb setting, I actually don't see it adjusting when I look through the lens. Am I missing something? Please advise and any info would be greatly appreciated. Thanks.
Well, I agree that doesn't sound right. Unfortunately, I don't have any C lenses laying around any more to compare for you :-\. I'll check in my Wildi book (which you should really have, if you own a Hasselblad), and see if there is any more detail, and get back to you.
Hi Mike, I have noteiced that u don't seem to use UV filter on your Hasselblad lenses. Is there a reason? Lately, I've been told to get one - For protection use. But I'm not sure it would help much... Any view on that?
I am agnostic about filters. If the lens came with one when I bought it, I use it. If it didn't, I don't add one. I guess I won't go out of my way to put cheap glass in front of expensive glass, but I also won't go out of my way to take it off :-)
I gotta 150 F4 and 80mm F2.8, should I get a T* 80mm or 50mm next?
Nice shirt :D
Mike have you seen the image quality difference between the 150mm CF and 150 CFi? I noticed there was a huge price difference. Wondering if you know if its worth the extra price.
Did you write me on flickr, too? If not, that's a crazy coincidence. I wouldn't spend the additional money on a CFi lens. You could buy another lens, or backs, or a tripod, or ... with that money!
Yeah I did Mike. After writing here I realized it might not be too wise to comment on a 5 year old video. Thanks for replying to both, you are a kind man sir. Thanks - Dan Lincoln Harris
Dan Harris No problem. I try to reply to all questions/comments on my videos (eventually!), no matter how old. Enjoy your Hassey and 150!
So are only HC lenses mountable on H series bodies? Natively do CF or other series lenses not mount without an adapter?
+FanaticDrummer I don't have any experience with H lenses, but I assume the mount is not compatible with C/CF, etc. lenses for the V series. Perhaps there are adapters, though.
do the CF lenses have the depth of field preview or stop down button like the C lenses?
George Photos by Josef Yes, they actually have a really nice locking mechanism.
I can very highly recommend the 200/2000 series Hasselblad cameras and
specially the Zeiss Distagon 50mm 2.8 and the Zeiss Planar 110mm 2.0,
for the 110mm get also the 2x Zeiss Mutar or the late 2x of Hallelds own
it gives a very good 220mm 4.0 with great close focus ! The 50mm have a
very good close focusing down to 15x15cm ! The Zeiss Tele-Tessar 350mm
4.0 are also very good as the Zeiss Macro Planar 120mm 4.0, off course
the Hasselblad SWC with 28mm is also very good.
www.hasselbladhistorical.eu/HS/HSTable.aspx
J Cooper Agree on the lenses. I had both when I had a 2000fcw and 201f.
Nice video. By the way, which color film did you use in the pic of the armchair.
Thanks
That was Portra 400. It's over here: flic.kr/p/aBNugy
Thank you Mike. By the way do you still have the 500 cm, im looking to buy one. What should i check by buying one?
Thanks
Hey, i ended up buying a 503 CW, will arrive tomorrow. Really exited about the camera. Thanks for your video.
How does a person identify which type/series of lens that they have?
Debi B From the pictures you sent, I’d guess CF. Should show up in markings somewhere on the lens. Can’t remember where right now.
I'd say shoot those two for a while. Both great lenses. Eventually a 50mm will be nice.
just been able to afford an old 500 ELX body,
would you recommend CF or C lenses.. both seem very pricey..
tks
I would recommend CF lenses, as they work pretty nicely on all types of Hasselblad V-Series bodies. However, they are a bit more expensive. There aren't really any "cheap" Hassy lenses, unfortunately, but if you stick with 80mm and 150mm, and get something a little ugly, they aren't too bad. Check KEH.com for prices, if you haven't already.
Mike Thomas thanks will look
KEH just said that even though we bought it, they didn't have it and will refund us. Darn, I think maybe I'll just get a 60mm.
Hi Mike, what are your thoughts on the 80mm CBT lens?
I haven't owned one. I believe it's a simplified/lower-end design. I don't believe Hasselblad/Zeiss ever bothered to make a poor lens. If you're doing portraits and general shooting you'll probably never notice, is my guess.
Thank you for the reply Mike. Can you explain the proper way to operate the depth of field lever on the 80mm cbt lens, I can't find any user manuals. How should it be set for regular use? Thanks again for the help.
teflonprimate I haven't actually handled a CB lens. I assume it has the same sort of slide-lock for DoF preview as the CF lenses. You kind of slide it into a locked position to shut down the aperture, and then tilt it to unlock it and it slides back on its own.
You should leave it "off" for most situations, since you'll want to have good light to focus, and you can often estimate DoF without using the lever (it can get pretty dark with the DoF preview on).
@lachsimzwaifel Yeah, too bad it's a zoom lens! :-)
Hi Mike, Is it possible to use the new H Lenses on the 503cw?
+Hamid Ghorayshi I'll make a guess and say "yes" with an adapter, and possibly an effective focal length change. They would of course be fully manual. Probably best to do a Google search before up and buying a bunch of H lenses to run on your 503, though!
+Mike Thomas Thank you for your fast reply. I already searched the web to find an adapter for H to V but couldn't find any. There is some available for CF to H body. If you know any link, please forward.
Hmm, seems like it would be possible, but a quick search makes it seem doubtful, as you've found I'm not sure why.
+Mike Thomas Thank you Mike, There could be a technical reason for it. May be the new H Lenses need to connect to power not only for focusing function, but the aperture.
Yes, that may well be the case. I'm not really up to speed on Hasselblad H cameras.
It sure would have been nice to see close ups of the lenses instead of sample photos so we could really get an idea of the specifics and comparisons to the other lenses...that's why I chose your video! disappointing!
Sorry 😬