Aliexpress "Carbon Fiber"(?) 😆 Sard Replica Wing ??! | NC Miata

Only rep bois here.
Product links:
Rep Sard Wing - bit.ly/3JbBrfM
Wing Extension - bit.ly/3CoLjPG (this will not work for the way we installed it for the NC since our bracket is flipped, but leaving it here regardless. It will only work if used with the bracket unflipped.)
---------------------------------
Follow Tommy on IG: @tommyyu5

[@johnnyz9879]

Probably need 2 pieces half inch spacer for both side and trimming the side of the bracket as well.

[@feliiiik]

I might have missed it but hopefully you used some Loctite on those screws so they don't come loose.
I personally hate drilling holes so very interesting concept for the wing. Hopefully it doesnt harm the trunk or quarter panels in any way!

[@spec_egg]

The wing stand bolts do leave some indentation underneath the trunk, where it’s clipped on.

[@vlenhoff]

@@spec_egg I think he meant if you used loctite on the screws. You put loctite on the screw before you screw them in, so they don't become loose with vibrations.

[@wattshington]

I really want this wing for my is350. I wonder if the frs ones fit because they’re so much more affordable 🤔

[@RoadsterAlex]

Looks good

[@j870117erz]

I bought the SARD spoiler for my MX5 ND also, despite hving to drill 8 holes on it, it turns out awesome!
Did they give u any screw nuts for the bracket (the trunk part), and two pieces of metal/foam pads?

[@spec_egg]

Glad it worked on the ND as well! I’m not 100% sure which screw nut for the bracket you’re referring to but it mine came with those 3 set screws on each bracket. It didn’t come with any foam pads tho.

[@tigerrider6711]

This has convinced me just to buy a spare trunk lid from a wreck and drill it.

[@user-ww4ru5se3c]

I bought the item in the overview section, but when I tried to turn the bracket the other way, the screw holes didn't line up and I couldn't attach it. I think I bought a different one.

[@trxlly]

yoooo W

[@AlexNtrp]

flip the hookplates horizontally maybe then,the wing's feet 'll come inside of the trunk line and hopefully u can close it with the bolts samely tighten

[@MikeKleinsteuber]

Why not just get two custom made attachments to the wing ? Would look much better and fit more accurately.

[@fongyang7362]

Will still work with a Miata NB2?

[@razcheung8398]

Is it not possible to swap the brackets over to the opposite sides rather than flipping them back to front?
(Or does the hole spacing not allow for it?) 7:59

[@spec_egg]

The only orientation is the one we ended up using. Otherwise, the holes did not line up with the bracket

[@feather800209]

NA can use?

[@brunoribeiro109]

How has this wing held up? Any issues with your trunk flexing yet?

[@spec_egg]

Holding up great. There’s no flex that I notice, probably because of the mounting point being on the side rather than in the middle.

[@unbelievableflyingdrunkenp755]

Is this the same spoiler that carbon miata is selling for 499 usd?

[@spec_egg]

I think so. I saw the pictures of the spoiler on their website and everything seems identical.

[@usat42]

it was like having a tooth removed watching this

[@challengeronrift]

Isnt the wing on backwards? Or is it just me....😢

[@mr2garage]

Do you know if this would fit the MR-S?

[@spec_egg]

We’ve never test fitted it. The NC trunk measures 41-42.5 inches across, since it is curved

[@chrissikora3359]

I think its backwards

[@flaquineitor360]

Hey do you think it’ll fit an nd ?

[@spec_egg]

The NC trunk measures 41-42.5 inches across.

[@j870117erz]

Bought one for my ND, bracket doesn’t fit but can custom make one that fits. The boot of the ND is more narrow than the NB and 86(BrZ).

[@DiamondHandsHodl]

Where is the Asian guy with the F87 M2 Comp?

[@spec_egg]

Who? 👀