Acid rain working model
Vložit
- čas přidán 25. 02. 2023
- Acid rain working model #school exhibition
Acid rain is made up of highly acidic water droplets due to air emissions, most specifically the disproportionate levels of sulphur and nitrogen emitted by vehicles and manufacturing processes. It is often called acid rain as this concept contains many types of acidic precipitation.
The acidic deposition takes place in two ways: wet and dry. Wet deposition is any form of precipitation which removes acids from the atmosphere and places them on the surface of the earth. In the absence of precipitation, dry deposition of polluting particles and gases sticks to the ground through dust and smoke.
Causes of Acid Rain -
The causes of acid rain are Sulphur and Nitrogen particles which get mixed with the wet components of rain. Sulphur and Nitrogen particles which get mixed with water are found in two ways either man-made i.e as the emissions that are given out from industries or by natural causes like lightning strike in the atmosphere releasing nitrogen oxides and volcanic eruptions releasing sulphur oxide
Refer below video for making factory building
• Water pollution model ...
How to make Grass & Tree for school project #papercraft
• How to make Grass & Tr...
Material used
Plywood
Fairy String Multicolor Lights- amzn.to/3GKsCsq
Plastic box
Toy car’s
Acrylic Colours - amzn.to/3JDwiOB
Masking/Paper Tape - amzn.to/3mvaBH5
Mini Water Pump DIY Kit- amzn.to/3T6VH69
Switch - amzn.to/3ZVvlGp
Corrugated Cardboard Sheets- amzn.to/3ysQYST
Transparent PVC Tube- amzn.to/3ZBSoX8
Fevicol - amzn.to/3F8C1sH
Chart Paper - amzn.to/3YCtHbC
HOT MELT Glue Gun- amzn.to/3l69b5F
Equipment used-
Soldering Iron Kit -amzn.to/3lam3HP
Tripod Stand Holder for Mobile - amzn.to/3ZAa2KF
Mobile - amzn.to/3FcEwKL
Microphone- amzn.to/3JtmvdH
Ring Light with Tripod Stand - amzn.to/3JdDpfc
Sir please edanu exaplane made
Acid rain is caused by the release of sulfur dioxide (SO2) and nitrogen oxides (NOx) into the atmosphere from sources like burning fossil fuels. These pollutants react with water vapor and other chemicals in the air to form sulfuric acid (H2SO4) and nitric acid (HNO3).
The acid rain model involves a few key steps:
1. Emission: SO2 and NOx are emitted into the atmosphere from sources such as cars, power plants, and industrial processes.
2. Transformation: In the atmosphere, SO2 and NOx react with oxygen and other compounds to form sulfuric acid and nitric acid.
3. Transport: Winds can carry the acids over long distances, allowing them to travel far from their original source.
4. Deposition: Acid rain falls to the ground as rain, snow, or dry particles. When it comes into contact with the ground, it can impact soil, water bodies, vegetation, and even buildings.
5. Effects: Acid rain can harm ecosystems by leaching essential nutrients from soil, damaging aquatic life, and harming forests. It can also corrode buildings, statues, and infrastructure.
Efforts to reduce acid rain include regulations to limit emissions of SO2 and NOx from industrial and transportation sources.
@@nakulsahuart😊
@@nakulsahuartHindi me bhejo na place
😢
@@nakulsahuarti
Awesome 👍😎 it helped me for my science exhibition
Thank you so much sir it's such a wonderful project even my teacher's are impressed with it.
It's my pleasure
Sir you did very excellent project we should salute your patience and hardworking
Thanks a lot.
Ur so OP man 🔥🔥🔥
Thank you sir 😊😊 i love all the projects qhich you do❤
THANK YOU SO MUCH SIR FOR THIS IDEA!!
Welcome!
Highly appreciated ❤
Thank you
Thank you 💕😊 very much sir we love you sir
Really It Helpful For Me Sir❤️
Thank you
Sir I got 1st prize thank you
Congratulations 🙌
It is really a wonderful model just luv it 😊😊I made it in my science exhibition
Great 👍
3:29 iss light ko kya bolte hai
Thank you sir it is more helpful to me
Materials Needed :
Large Woodem Boards
Large Cardboard
Cello tape
White A4 sheet - 2
M Seal
Brown colour sheet - 3
Water Colour
Mini Water Pump
Tape
Cotton - 125 g
Battery
Wire
Led Light series connection
Thread
Hard Scissors and Cutter
Small Tree Branch without leaves
Black a4 sheet 3
White colour sponge of Thermocol
Big Plactic Box
Wire
Plastic Cars
2 battery
What is procedure can you help me 😢
L
3:29 iss light ko kya bolte hai
Nice
@@ShivanshKumar-bx2kz
Series light
Wow
Thank you sir it helped me alot😊😊
Ek number bolteeee
Thank u sir this is modle for school project
All the best
Sir please make more chemistry working model...
Simply awesome. Thank you sir
Thank you
Tysm, more people in this earth are needed like u
Thank you.
@@nakulsahuart😊7u7
Very very thanks sir intha model la tha sir nanga project senjum naraiya star ⭐⭐⭐⭐⭐ ratings kuduthanga sir thank you so much for this video ❤❤❤
Thank you
Wow......😮
It's too amazing and our group has decided to make it and its look is too awesome by the smoke and lightening. Just looking like a wow ❤
Thank you, good luck for your project.
Your models are so awesome . Keep it up .
Thank you
Sir tq so much sir ur amazing 🎉
This is a superb project but can you explain what you did with black ,red wires and all abt batteries the whole process
U can use 9V battery instead of cells
Awesome 😎 I like this❤
Thanks 😄
Yes I always make it for my exhaviation
Sir ji is project ko inspire award milega sir please tell me this is very important sir ❤❤❤❤❤❤❤❤❤
Thanks ! I would try my best to make it 😅
Best wishes for your project
Thank you Sir, it will be helpful for my science exhibition 😍
Most welcome 😊
Thank you sir
You are the best ❤❤
Thank you
Me and my sis do this thank you 😊
Best wishes for your project
What can I use as a substitute for the wires u used to tie around the clud and u sed it as a stand
Thanku so much sir ji you are so great
Thank you
Sir apke subscriber badhne chahiye itne creative hoke👌👌super creativity
Thank you
👍👍👍
amazing sir
Which light is used in this model?
Check the description
I think some of the students were coming from my school for science exhibition.
Sir please explain in every video that we also can explain in school pls sir 🙏
Sir mind blowing 👍
Thank you
Thankyou so much sir
You're awesome sir..❤
Thank you
It's too good and very simple ..
I got first prize 🏆❤
Congratulations 🥳
Sir how did you make the fire? I did not understand
Thank you so much ❤😊
You're welcome 😊
It's so beautiful ❤️❤️
Thank you
very nice project
Thank you!
Which light is that which you have attached to cloud
Such a great 👍 project!
Thank you
Beautiful
Thank you
OP man 🔥!!
Thank you
It is amazing but can you tell me that what thing you used for the water i mean acid rain??
Check description
7:25
Nice sir🎉🎉🎉
Thank u thank uuuu 😊😊😊😊
Welcome 😊
Very good modal😊
Thank you 😃
Superb
Thanks 🤗
Sir pls give description about this model
2:25
Sir factories ke niche jo stand hai uski dimensions kya hai clear nahi dikh raha video me
Can u tell about the wire how it is connected how it should be
Yes I planed ti make this project in my exhibition but in the last sir attached the cell to you the another device I can't understand anything sir could u please tell me how to do with n.my exhibition w days are left and I brought the all materia but what to do
😮Wow nice
Thanks 😊
Maine ye project bnaya tha apne exhibition me and i got 1st prize thank you sir heads of you❤❤❤❤❤😊😊😊😊
Great congratulations 🎉
@azmizahid9120 explain kaise kia??
How did you explained
Hello can u show or tell abt the electrical connection
Its little fast to understand the making of cloud and pouring of water
Tq sir I got first prize in science day Tq so much
Well done! Congratulations 🎉
Sir, thank you so much for giving us such a great exhibition plan... A lot of respect for you... May god bless you ❤
Thank you
Sir, i have a question what is the name of this white meterial that you used in green and orange area? ... Sir, if you donot mind please give me the answer of it
@@mariomsultana5961 it’s white M seal you can get it from hardware store.
Thanks a lot
Sir badal kasa bana u
So good, I win 1st rank in district level
Congratulations 🙌
Nice 🙂🙂🙂❤❤
Thanks 🤗
Sir what is the cost of the project
Thanks You sir This Competition We Fast
Most welcome
Super sir
How you setup the light
Bhayia wo black color ka aapne switch aatach kiya Hai kya pump se aur wo box me hole kyu tha jo aapne tap se cover kiya tha jis box me aapne paani rakha tha
Yes black wala switch hai, plastic box pahle use kiya tha to uska hole band kiya hai.
Sir u are unable to understand me
Ji maine small black colour switch leya hai use koi bki wire attach nahi hue hai lekin aapne kaise attached ke please muje bahot urgent hai kal mera exhibition hai please 😢😢
Sir can you please say what is that white material in which you kept the small bottle
It’s foam sheet, you can use thermocol also
Sir How much hours will it take to complete it
Around 4-5 hours .
Sir kindly explain which type of material you have used to produce smoke and put under factory
It’s Doop stick,Dhoop sticks are used in religious and spiritual ceremonies because they tend to purify the air and set the atmosphere needed to express devotion. You can get it from general store .
Sir can you tell me which material you use in this project pls
Check description
Thank you sir ❤️❤️
Can u tell me its principle,how does it work,item used where it is used full information pls
some points given in description plz check
Is motor required for the model??
What is in the base
Sir did u kept holes for glue plastic bottle
Simple and awsome😊😊
Thanks a lot 😊
Sir how can i make the mini water pump i didn't understand it please can u tell me
Sir house kasy banya hn vedio link plz
Ye wale project me banaya tha
Save Earth working model
czcams.com/video/jv_LiOc4PpE/video.html
Sir kya ham ess model ko waste out of best material ki catagory main gin sakte hai ??
Nahi . Aapko waste material se kuch kam ka banana padega .
Can you plz suggest me something sir ??
@@sania810 for which class you searching.
For 10th class sir......I really want your help sir ..I am very confused about it
@@sania810 you can make useful things like pen holder for study table , tablet lamp, torch, some decorative things like photo frames etc. from used cardboard,plastic bottle , newspaper ,empty can etc.
What Is the total cost of this material
450 rs
@@lakshika_24 nepali rupees 450
Can you pls tell estimated Cost?
What is kept for smoke?
sir from where you get these models is there any app or website
It’s not for sale, you can make it by watching step by step full video .
What did you use for smoke ?
Dhoop
Amazing
Thank you
What u have used inside the cloud foam i can't understant it kya vo glue ka dabba hai ya kuch or ??
Yes it’s fevicol empty bottle
@@nakulsahuart thnks 😍
Can you please explain it in brief.
Check pinned comment
When I saw it first time then I think this is too much hard...
But that is not too much hard....❤
Thank you, best wishes for your project
Sir can you please tell what is the motor name you used for water
Check description
What Substance You Apply To make smoke NO2 & SO2 from Factory
It’s cotton
Is that foam which you attached with the empty glue bottle
Yes it’s foam sheet
Sir rain ke liye aapne konsi machine use ki hai?pls help me
check description for material list