MONSTER MINIBIKE HONDA ATC 3 WHEELER TO 2 WHEELER
Vložit
- čas přidán 29. 08. 2024
- Purchased a Honda ATC 200s 3 wheeler with bad motor and converted it into a two wheeler monster mini bike. Some parts were found on Ebay but mostly taken off the donor bikes given to me by friends. If you have any questions, feel free to comment and don't forget to subscribe. Here's another project (trail bike) that you might like • COMPLETE BUILD MONSTER...
Both songs are from CZcams free audio library. Both are by artist name Silent partner and first song is called Believer and second song is Cloud patterns.
Awesome video. That young man will remember dad later in life everytime he sees a minibike. When I was 10 my dad brought me an old used minibike home. He would wrench on it about everytime i had it out. He finally looked at me one day and said, listen, you have watched me fix it all these times and if you want to keep riding, you will keep it running. I started picking up tools and doing what he taught me. As I got older, he got me a used 1975 Honda XL100. I put points in it once and rode the hell out of it. Thank You Dad.
a dad that made something for his son. can't get better than that!!!!!
+Peter Addison
Thank you Peter and thumbs up for support. Cheers
Him and his son bonded while building it. Boom just got better
But it's dangerous..
this is how i grew up with my grandfather. 6 minibikes and he had an actual Honda big wheel
It must be nice
Awesome build. I enjoyed the video very much. It can never be a bad thing when doing something fun, constructive, and informative with our kids. I wish more people took the time to realize we only have so long to do so. Great job.
Almost 10 years ago and still 100% relevant. Your a good Dad, and did a good job! Thanks for the vid!
To Julian Williams
I've tried to reply to your comment but your CZcams settings are probably disabled and I couldn't write back to you. Regarding parts, I've sold the engine for $100 and rear axle for $75 to some kid who is going to make a drift trike. I guess it's a new craze now slipping and sliding down the hill into incoming traffic.
Original gas tank was hella rusty and i just didn't want to deal with it. Besides, gas gets old after a while when it sits in the gas tank. That's why i decided to use smaller tank.It gives me several hours of riding time and i always refill it with fresh gas. Win Win
I just bought my first mini bike after years of motorcycling..always wanted one as a kid. Really cool build..it turned out beautiful!
VERY Nice, you are a talented individual & a Great Dad , God bless you and your family - this world needs more like you & i pray there are. Im touched by this, Thank you 👍
man that thing is awesome and the boy rides like a pro. Great job man don't worry about the ones hating on it they don't understand how much the smile on the boys face is worth. You built an awesome bike for your son for half of what one cost at tractor supply.
+Joshua Poche
Im not tripping about it. You can't please everyone in this world therefore I'm not even going to try. Glad that you liked our project and i look forward to building more contraptions with my kid. Thank you and have a great day.
Plus built from one of my favorites and most people's
Put rear brakes on it! If you get onto a slippery track and try to slow down with only front brakes it will slide out from under you! I know and have the scars to prove it!
Thanks for the tip. Appreciate it. Cheers
Only one way to do a break on this rear and he would need to modify the stock assembly to also take the sprocket or have a piece machined so you can run a foot drum break
Me too
Pure genius!, by far one of the best projects that I've seen on the internet in a long time. The simplicity and low cost verses overall function is off the charts ~ excellent job!
I'm amazed and humbled by all the attention it's received. So thank you for kind words, it's greatly appreciated. Wanted to find a bike with fat tires but no one sells them anymore. With little research and elbow grease bike came out cheap and functional. Cheers.
Great job, from a great dad!
+h8mail1
Thanks a lot sir, right back at ya. appreciate your support.
Great to see a father an son being a father and son!!!
To Daniel MacDonald 2 hours ago
Hondas deserve respect. You can buy old trail bikes in that style....
Running trail bikes are sold anywhere between $1000 to $3000 bucks depending on their condition. My hacked up creation came out to $350. I tried to persuade myself to show more respect to Hondas but my wallet told me to go this route.
Hi
+Ismail Makwana the house.
+balabay77 Great job!!.. How are the neighbors?
Glad you liked it. My neighbors could care less. Cheers
ps nice job on 15000
Sometimes everybody knows it's just going to work the way you want , and it does . Good show , Thanks
Nicely done! Ive seen a few others start to do this and not finish them. Love how you got it all in one video. Outstanding !
Thanks Tufdog for checking out my videos. I've enjoyed watching yours as well. your springer bike looks bad ass with that kick-starter. I'm a guy of few words and try to get down to business in my videos. its better to show your work than to talk about it like in some videos kids post on here. Thanks again and have a good day.
good job. i saw new trail bike like this selling a tractor supply in my area for about 700.00 . but home made is much more fun and time with son priceless good job dad.
Cool build. But all you did was make a large baja Minibike. The 200s is a WAY better motor than a harbor freight go kart engine. Very easy and cheap to rebuild and bulletproof.
Yes sir, that was the whole intention to turn it into a jumbo/ giant mini bike. I'm not an expert in rebuilding these motors. I was quoted at anywhere between $600 to $800 for complete rebuild. For that price I can buy 6 go kart motors and ride it till the wheels fall off. It wasn't meant to go fast 'cause I was making it for my kid. All in all it was a cheap build and my son likes it.
balabay77 that is what matters if your son is happy and you are happy I like how you made your own it reminds me of my Baja warrior 200cc trail bike I converted to the same exact belt drive you used on it I turned up the governor all the way up and I made it twice as fast I could top out at 65/70 mph I am going to be getting another Baja warrior 200
With these Predator 212 you can get them to go up to 70 miles an hour if you work on them enough in the work is easy and inexpensive so is a good trade-off
@@balabay77 is the engine diesel?
When I first saw this, I thought you made a Honda Ruckus. But then once the kid was on it, I was like "DANG! That is a MINI Ruckus!"
Fantastic job!
+Alexander Borsi
Its basically a go cart on two wheels or a riding lawnmower made for my kid to goof off on.
Hondas deserve respect. You can buy old trail bikes in that style....
what do you mean?
Daniel MacDonald tjckgfkf
I miss our three wheeler. Lots of fun,but you have to ride like you mean it and lean into the turns.
That bike is so cool! I've never seen anyone convert a trike to a motorcycle like this before. Well done.
Thank you Josh for checking out my video. Glad you liked it. Here's another one of my builds that you might find interesting czcams.com/video/OSipKs27f0M/video.html
Cheers.
pretty cool man i love to see people making stuff out of junk
dyhbjjgpohjbhhjkbnzgg
ToSha Moore ظظظظظ2
Here is a Great tip for EVERYONE!!. Next time you need to change color of of a seat or any vinyl or leather,
Try some Fiebings leather dye. It is a Great product! It is a thin liquid, But Very strong like ink and it will soak in rather than sit on top. And it will not chip or flake off when flexed. First use a very light coat, then a second coat for even coverage. It will look a bit smudgy, But put just a little paste shoe polish in it and it will look Terrific and will last a Long time! One $7 bottle will easily do 5 or 6 seats and touch-up is super easy! If it is ever needed. Thanks for the videos! And Super Thanks for doing all this with your Kids!! Big Thumbs Up!!
+Bob Duvall
Thank you Bob for your comment and support. I will look into this leather dye and see if its any good.
Sweet, wish i could have a mini bike :( but i got my yerf dog go kart love that go kart
Isnt the motor on her dawg a honda clone?
I honestly think it's so fascinating that you can do all this stuff just pretty much by yourself good job👍👍
I'm sure when you grow up you'll have better skills than i do. Good luck buddy.
It ls brandon mason I like your videos
Charles Mason Thanks Brandon, appreciate your input and thumbs up for watching my clips.
Good to see a dad an son work and learn together
Indeed. Appreciate you watching our project. Cheers
TO: gunner ferguson4 hours ago
how much did it cost in parts to build that. Please answer back I am very interested in building one of those my self.
Hello Gunner
I've tried to reply to your question but your settings are disabled where no one can reply to you so that's why i'm using this message feature to get back to you.
I purchased this 3 wheeler for $200 as is.
sold the motor for $100 and rear axle for $75 leaving me with $25 bucks worth of stuff like front end,gas tank, frame and wheels. Bought harbor freight motor for $100, torque converter on eBay for $100 and rear hub for $25 on eBay. Kill switch for $10 and hand grips for $12 also on eBay. Paint and primer $30 and welding flux core wire at home depot for $12. Chain was $20 and rear sprocket $17. Got the tubing for free at scrap yard.This whole project roughly speaking ended up costing me around $350 bucks. All in all, it came out cheaper than getting a baja mini bike at the store but those massive tires are priceless. If you are planing on doing similar project than get a jack-shaft to off set your motor with rear sprocket. it will be much easier to make adjustments. good luck with your build and let me know how it goes.
Pretend im your son and make one for me.
Do you work at golden state foods ?
Literally best mini bike I have seen yet!! Awsome
Before fabulizer-> after Fabulizer
great video and fabrication skills. I love seeing the entire fabrication process and having your family help out. Please keep us updated.
Thanks for your comment and support. Appreciate it. Happy holidays.
Would u sell the recoil off the Honda
three wheeler and the muffler off of it too.
Kenzie R Sorry but i sold the motor and rear axle. Muffler was no good because it rusted thru and had some holes in it .
Oh that suck
Nice work. Predator 212 is a good engine, especially if you remove the governor
There isn't many of these left. You should be restoring it instead of cutting it up and turning it into a bike.
Gabe Lewis Thank you for your input Gabe. I do have another 3 wheeler that is in good running condition. i will eventually restore it to mint condition and keep it as a momentous of the early 80's. Plastics are weathered but the trike runs great. The bike in this video went tits up when it started to have a grinding noise in the motor. I was quoted around 600 to 800 just to rebuild the motor. It wasn't worth my time and $$$ to restore it. Purchased this trike on craigslist for $200 specifically to make a mini bike out of the frame. In my neck of the woods these trikes are still readily available anywhere between 100 to 1000 bucks depending on the condition that its in. Ranchers will gladly sell their rusty barn toys for dirt cheap. Thanks for watching.
balabay77 Hey no problem sorry if I sounded mean in the first comment. Where I live its pretty rare to find a good running one.
Gabe Lewis No problem. i totally understood what you meant and i agree with you only if the bike is worth restoring. some people invest thousands into these bikes just to keep them in the garage. i guess there's a bunch of sites dedicated to trike lovers and enthusiasts who would love to hate my video. In life, you can't please everyone. Like i said before, i will keep one ATC 200s that i paid $175 bucks and maybe it will be worth more 5 or 10 years down the road.
balabay77 yeah i knkw what youre saying. Have you ever drove a 250r or a 350x? They're really fun bikes! You should give them a try some time. The only problem though is that you may get addicted and invest in one at the end of the day!
Never had the pleasure of riding one. Heard that they are fun. I'll keep an eye out on craigslist and maybe i'll score a sweet 350x. Cheers.
The world needs these.
I'm running late at work. I should be there by 6
Random
+T Wayland 😬ik
Jennifer Ortiz what the fuck
Jennifer Ortiz What?
Jennifer Ortiz lemme smash
Awesome! Your boy was waving to all his friends and the little girls like a boss! YOU sir are a good daddy!
+Jordan Wicinski
Thanks a million for your support. Means a lot to me.
blaspheme! a garbage lawn mower engine! thats one way to ruina honda
Peter F , psst , it makes more piwer than a lawnmower honda , and its a clone
Its not a lawn mower engine. Its a tiller engine
You inspired me to try this build brother thanks for the idea! I bought myself an old beater Honda 185 and I’ve been working on it
Excellent build. That 212 Predator is a great choice. I used the same engine for a boat project. All I can say is it pretty loud when the motor is 2 feet behind you...
Cheers,
+Tom C.
We had a good experience with these motors. only one out of five had carb issues. it would work normally during idling but at higher RPM it would surge and starve for fuel. we replaced it with another one and now its all good.
Nice job there & you got your son involved to teach him on how to build stuff. Great father son time. My father never knew how to build stuff so I never really learned. But this bike is awesome.
Thanks for your kind words and thumbs up for watching. Viewers like you encourage us to make more projects like these. Cheers
So many views, yet no comments. What!? Ok, let me start. Great job, seems like tons of work. That's a really wide seat for a dirt bike! LOL. Thanks for sharing this project! Great video of before, after, and running it. Don't jump too high, no suspension on the back end!
Thanks Matt for sharing your thoughts and glad that you enjoyed our little project. Cheers
What a great build and a father/son project. I can't believe how great it all came out and how nice it looks. I am sure your son is proud to have it and enjoys using it very much. One thing you might want to try is to lower the air pressure in the tires, especially the rear tire. Those balloon tires are designed to operate at low pressure to give the rider some cushion as the rear of the bike (and ATC) was rigid. It will also help with traction.
AdventureCayman Thank you for your input. Yes it does ride better with less air in tires. My kid likes his pit bike better than this bike so i get to goof off on this bike sometimes. My next project will have a swing arm and full suspension. This was just something for me to practice my welding skills. Appreciate your support. Cheers
If i was to make a monster bike i'd use a Big red 250cc. Use the same engine/trans, shocks front and rear, some how i'd make it so it would have back brakes (if there's enough room), rear brake light. etc. but over all very nice clean build. Well done.
thank god you got this bike because if i got it i would have spray painted it then gave it a new seat
Beautiful build. That's a dream bike for any kid. I built one for my son but its much smaller.
Dude that thing looks like the motorcycle from the second Batman movie, its awesome.
+bionicvenom
Glad you liked it. That's what the guy who bought it was saying.
So it's basically a a tractor supply baja warrior 200 but with style , sweet!
I thought wasn't gonna be like an actual change I thought it was gonna be a fake before and after video, nice to see people still have talent ^^
+Jessej226
Thanks man, it means a lot. Cheers
Смотрю и восхищен, руки золотые, давно твои ролики по десятому кругу кручу, собираюсь тоже собрать такой к лету на пляж с женой гонять ради прикола и удовольствия))) Удачи в личной жизни и продолжай удивлять народ)))
Привет Алексей
Благодарен за просмотр и очень приятно что вам понравился мой байк. У нас такого уродства не продают так что пришлось собрать самому. Давно мечтал сколотить байк с большими колесами. Сей час я еще собираю такой же ради прикола. Будим на них кататься гурьбой. Это дёшево и сердито. Еще раз спасибо за поддержку. Всех благ.
That thing is SICK!!!!! Awesome build
how cool is that! I did initially think; " NOOOOO!" don't cut up the three wheeler, but then thought what a cool bike and a great way of getting your son into biking :)
Simon Rogers Thanks a million Simon for your support. I totally understand that for sentimental value, people would not take too kindly to hack up projects like the one in this video. Here's my take on this. Besides having a blown motor, the 3 wheeler was in bad shape and too far gone to be able to salvage it. Trike needed a complete restoration to make it look like new. (roughly 2000 to 3000 thousand dollars.) I basically gave it a new shot at life. So it lost a wheel, big deal! At least its being used on the weekends instead of sitting in someones barn collecting dust and rust. I got it for $200. sold the motor for $100 and rear axle for $75. ended up with frame and front suspension for a whopping $25 bucks. All in all, This bike came out to around $350. Its a cheap, functional bike that's fun to ride. Cheers.
I'm with you on re-purposing stuff instead of chucking out. I reckon Honda would have made a mint selling a two wheel version :)
Класс очень нравится, продолжайте дальше делать мотоциклы на толстых колёсах, ещё бы заднее колесо на амортизаторы поставить.
Great job man, you've inspired me to convert my old honda 3 wheeler to a 2 wheeler.
It's good to see a father son project, but seriously don't let your kid ride in shorts on pavement. ouch
Thanks for the advice Josh. Road rash ain't no joke. Cheers.
the engine comes with some oil in it from where they quality test it, its a good note to drain the manufacturer oil first and the change the oil again after a couple of rides because the first few hours are a heavy break-in period and you will probably get a lot of metal shavings in your first batch
+Ethan Bean
Yes sir. In my previous videos viewers were pissing and moaning when i drained factory oil that's why i didn't mention it in this video. They probably don't know that factory oil got lots of metal shavings and flakes in it so its OK to recycle it and top it off with fresh oil.
Awesome build. Some more paneling and he'll be able to dress up as Batman wit his Batmobile on Halloween.
Tanmay Chhatbar indeed.
I like the 3trike more, for me a shame, but respect your work and your choise, its yours
AWESOME LITTLE SCOOTER!!!!!! You have a very lucky son on your hands man... One of the coolest vids I have seen in along time! GOOD JOB!👏👌👍
+qhiggie
Thank you for the thumbs up and glad you liked it.
your son has good bike control! good times with your son! my son is 10 and i like to build a mini bike with him soon, great inspiration!
Thanks for your comment. You should make a bike with your son. When I started working on mini bike, my son wanted to help. Instead of seeing him play video games and spend time on computer, it's better to get kids involved in hand on projects. That will keep them out of trouble. Have a pleasant day.
Interesting little minibike..nice work! I would have to have the honda motor, back shocks and back brake. Cool first minibike.
Great build and great visual storytelling.
nx99 Thank you sir. didn't think that my clip would get so many views. I appreciate your support and thanks for your kind words.
We have the same 3 wheeler. The original transmission is wicked lol! Would throw you over the handlebars when you downshift if you weren't paying attention to the rpm's, of course it's clutch less. It's too bad you cut up that specific one, because their increasingly rare. Very powerful for being a 1 cylinder.
+Travis Piper Hello Travis. I have another 3 wheeler and i know how wicked and powerful it is. The one i hacked up was dead on arrival cause motor kicked the bucket. It turns out that its a taboo to modify these trikes. Not sure why everyone is pissing and moaning about my project when these ATC's go for around 100 bucks in my area. Rolling chassis are even cheaper ($50) On the up side, this video is being watched a lot more than any other ATC videos out there.
balabay77 Must be common in your area then lol. I do like the project though. ;)
+Travis Piper
I wanted a bike with fat tires but they are hard to find nowadays. Honda fat cats and Yamaha big wheel bikes are around $3000. Decided to make one just for kicks. It's nowhere near as good as fat cat but it is what it is. Joe Dirt cheap.
Great fab job! I remember back in the mid 70s before I got into MX, mini-bikes were the fad and I would of given anything to had a mini like that, again great job!!
Strat Playing Guy Thank you for saying that. you are too kind. I've always wanted to have a bike with huge tires but unfortunately no one makes them. Made it for my son and I to goof off on trails and stuff. Cheers.
balabay77 I would love to find one of the old Honda Fat Cat's to restore for my grandson as well as myself! I remember them coming out in the late 80s and always thought they were cool off roaders, but they're rare rare to find! Your bike reminds me of one, with the ATC fat tires and all....cheers (:
Killer bike!! Great job!! Tons of fun for the little one.
Back brakes are not an option, they are necessary. Stopping is more important than going. The rest oc the build is pretty neat. Good idea.
+Myfootsasmokin
Yes sir, my next project will have both brakes.Thanks for the tip and thanks for watching.
Just finished mine after watching your video.
Mine is different but this video gave me the idea.
Thanks!
My first beer today will be drank in your honor. Well done. Love it!!!!
Thank you Duke. Appreciate it. Cheers.
Oh man that looks so COOL !!! I bet your son loves it to, looks fast as well.
c0nnys1 My kid always wanted a pit bike so i got him SSR 125cc bike to goof around on. This fat tire bike can go 40 to 45 miles per hour. Its not super fast but great for trails and what not.
Сделал вывод, что вы русскоговорящий, поэтому напишу по-русски.
Прежде всего, спасибо за видео, очень познавательно, мотивирует.
С удивлением обнаружил, что в России мало кто занимается построением Go Kart и таких вот минибайков, по крайней мере видео по этой теме почти нет. В штатах, на сколько я понимаю, это весьма распространенное хобби и целая культура.
Есть идея сделать русскоязычный сайт по тематике, где будут планы, схемы, примеры проектов, описание используемых модулей и т.п. Будет здорово, если вы поделитесь интересными материалами, идеями для русскоговрящих энтузиастов.
Спасибо!
Здравствуй Иван. Это хобби в России тоже популярно только не в мегаполисах. Это все где-то нужно хранить или в гараже или в частном секторе. Мой дядя жил в Сибири и он мастерил такие вездеходы что штатам и не снились. В тайге это было необходимо а мы здесь просто мастерим драндулеты как дешевое развлечение. Я бы с удовольствием поделился бы идеями но как видишь, собираю байки из всякого металлолома. Они получаются в единственном экземпляре. Если чем смогу помочь то помогу. Спасибо за просмотр и желаю всех благ.
I'm a trike fanatic & I don't mind a build like this. Great Job! The motor was questionable but understandable.
Badass. Thats a little more than "mini". I would love to build one like that with a v twin engine using a honda big red frame.
My goal was to make a cheap or should I say very affordable bike out of junk. I also thought about going bigger with motor size but frame couldn't accommodate it. Secondly, I would of had to use 40 series torque converter or even go with Polaris snowmobile heavy duty clutch. The whole setup could of ended up costing me well over $1000 bucks. Bike in the video came out to $400. I know that it's not very powerful but for my 10 year old it's perfect. It's got enough cc's to Cary me around and I Weigh 180lb. Predator engines are cheap, reliable and disposable. Thanks for watching my clip.
Nice job , i wouldve never thought to do that with an old 3 wheeler.....i thought you were rebuilding one of those yamaha Big Wheel dirt bikes from the 80's at first....
+Matt Andthatsallyouget
I've always wanted to find a fat cat or a big wheel bike but they are so rare that its nearly impossible to find one unless buying it on eBay for around 3 grand. made something similar for fraction of the cost.
Another great build and priceless time and memories with your son. All too easy to go out and buy but these builds are priceless : ) The only thing I'd advise on is think about getting a more powerful welder as I'm guessing the one you use is pretty much wound up all the way... Either way, try and get a little more penetration on your welds. If you can see a tiny dip right on the edge of the weld then it's cutting deeper and a flat or concave weld is good to see rather than convex one : ) Just a simple tip from a fabricator and no disrespect intended. Damn good to see a Dad doing instead of the easy paying option !
+John Smith
Thank you John for your welding tips and appreciate your support. This was my first ever welding project and as you can see my welds came out unbelievably bad. I'm getting better at it with every project. As far as welder concerned, its actually a 170 amp which is one step above 90 amp its just my inexperience at setting the temp and wire feed. So far whole bunch of people rode the thing and the welds are OK. This project actually came out cheaper than if i would of bought a bike at the store. Thanks a million for checking out my videos and take care. Cheers
Your son is having a blast!!! Hey Great build on a budget buddy .I like the fact although it has a rigid frame the oversized tires act as a suspension well done!
+richard bolt
Well, thank you sir. Indeed it was one of the cheapest projects I've made due to the fact that i sold rear axle and seized motor which lowered the cost. Whole gig came out to no more than $350. Thanks for watching and thumbs up for kind words. Cheers
Looks like a freaking Batmobile but in bike form. Awesome job dude :D
balabay77 That does seem like good price, but I'm in the UK sadly
really a badass custom mini bike! i want one!
Damn That's Awesome,I Love My 3 Wheelers But You Did One Hell Of A Job!!!!
You Should Make/Sell Them,I Want One!!!!!
Thanks Russell for your support. I know that lots of trike lovers hate to see someone like me hack the frame but these ATC's are sitting in people's barns or outside in the elements covered in rust and weathered. Pissing and moaning that I shouldn't of done that doesn't bother me one bit. At least these bikes are now serve a useful purpose. Made another one that I think came out nicer czcams.com/video/TW2PK6csXDo/video.html
Appreciate you watching my clip.
A big rear centre exhaust would finish it off and an air filter at the front to fill in the gap. But she still lookin good
Chris Carr I like how you think. Fat exhaust would make it more appealing. appreciate your input. Thanks for watching.
That is a really cool bike. Now i want to turn my yamaha 225 Dx into one of these
*KICKASS Build!!!*
I am going to be building one with a 6hp diesel soon :)
Thank you. I would love to see your future build. keep me posted and let me know how it turns out.
I should be starting on it in 2 weeks or so, I already got most of the parts I need
Sweet.
6:40 I think I saw a safety picture of this scene with a red circle and a line through it once.
🗣You should always put on your steeltoe sandals before using your feet to hold down a steel plate down before you grind your foot off🤗EVEN though when he was welding I seen him using metal clamps he must have forgot how to use them by this part though lmao people these days... can't grow a foot back or your toes😂😂
hondas deserve respect
Awesome dad! I love the tundra like tires! It would be awesome to give it a go on a snowy road, I am sure it would be fun to get the grip of those big fat tires on a snowy pathway!
+Ernani Joppert
Glad that you liked the bike. Im sure it would do great in the snow, sadly 😢 it doesn't snow here in out town. Cheers
balabay77 Well, snow is nice but nice to see for a few days, so I am actually glad you don't have it around lol!
This is a great video and a great build. Your bike came out real sweet, very impressive work. I like how you reused as much as possible. Thanks for sharing Bro!
joe smoe
Thank you Joe. Glad you liked it. I enjoyed making this cheap and functional bike.
Good work man way to go, the kid is having a blast !! good job.
Sammy River
Thank you sir for watching and commenting. We enjoyed building our first project and glad that many viewers supported us by checking out this video. Cheers.
I like what you did there sir, you made something better than store bought IMHO :)
Great Job balabay77, your video location look familiar, I lived in Amador County (Ione) for a few years. In Arizona now. Lots of good places to ride here and the police leave you alone. keep up the good work.
Hello Tom
glad to hear that you enjoy Arizona. As you probably know, Here in California got to have a green sticker to ride anywhere off road. That's why we found a secluded field away from all the cops and rangers. We even get hassled on mini bikes. Too many rules and laws here. Thanks for your comment and have a great day.
I salute ya young man!😎👍 I hope this reaches you and those you love in great health and happiness❤️🙏
Nice job man,I'll bet the little guy couldn't be happier!
Little guy now wants to learn how to ride a manual pit bike. His wants and needs grows by the minute. Spoiled kids these days.
Well,what can you do,you've created a monster!! Take care,and have fun with him now,he won't be a little guy for very long. Peace.
Now I got me automatic pit bike so dad
I mean got me a
DanielB4life I kind of thought thats what you meant to say,well be careful and listen to what your Dad tells you and you'll have a lot of fun! Maybe before to long,I'll be able to get some kind of bike to mess around with.Be careful,have fun!
That thing is awesome. Way to go. I’m building my sons mini bike now. This gave me some good ideas.
Brandon Brand
I’m glad that our project gave you some ideas. Thanks for watching and commenting. Good luck with your mini bike build.
Great! job on the that Honda ATC. It came out very sharp
Thanks Robo Cop. My goal was to make a functional and cheap bike that my kid can abuse.
You sure achieve that goal. You son looks very happy riding the motorcycle. I just finish making one for my son a Cat 300 mini bike.
Very cool rebuild project!
Great Job Dad! Artistic for sure. Love it!
You should run a fuel line from the top tank to the bottom tank so you can fill it up from top and have more fuel capacity.
Мастер на все руки, молодец, так держать!!!
Спасибо Алексей но я не мастер. Мне просто захотелось пере делать этот мопед под свой лад. Давно мечтал приобрести байк с большими колесами но жаль их не делают больше. Пришлось "закусить" рукава и самому собрать.
balabay77
That thing is amazing!!! Great job!!!! your kid was probably smileing all day....haha.
Yes sir, we both enjoyed making it and riding it. Its cheap and easy to maintain.
Balabay77... What is the most cool part about this video is you did this with your son and taught him so many things along with some awesome father son bonding. Well done man.
Keith Allen Thank you Keith for your kind words of support. My son and i work on many projects together that way he learns useful skills and get to spend quality time. Hopefully he will appreciate it later in life. Cheers.
I am sure he will as I am sure you have and do from your past. I do as much as I can with all of mine as often as possible. Many thanks for a great effort on the rebuild and video.
great work it looks like it was made from a factory!
willy18qc Thank you Willy for your support and kind words. Its nowhere near factory quality but it still functions as any other mini bike on the market. Glad that many people enjoy watching my re-purposed junk come to life.
Everybody has a belly button, and an opinion. You own it,do what you will with it, that is your privelidge! Be proud of your skills and ideas to think out of the box! Piss on the haters!
Appreciate your comment and support. Cheers.
poor big red. not too many left i imagine. great build!
Great job. I want a rear brake and shocks next.