Watch next: ➥ How to renovate my old house czcams.com/video/EbKQF-NstcA/video.html Playlist DIY Home Improvement czcams.com/play/PLQJGHOK40fH_ujAXKWHTGGV8kDQcBAqwy.html ➧ IKEA PAX sliding doors wardrobe, BIG kitchen cabinet czcams.com/video/jCa1StJVlzw/video.html ➧ IKEA PAX Wardrobe assembly, 2 doors with soft closing hinges. czcams.com/video/RYgbe8mTaMU/video.html
It's NOT HARD PEOPLE...I put the whole IKEA PAX closet at age 69 alone and it came out great and love it. Thanks for your video which helps and I am not paying $175+ to have someone put it together for me. Just watch DIY and it's easy.
Thank you, I’m going mad reading all these comments about how hard it is. It’s the same system EVERY piece of ikea furniture uses to assemble and it’s like putting bricks together.. how do people not figure this out ?
@@sarahdiehl9156 Some people have money and want to come home and have it done , rich folks don't care about thinking, they have enough to deal with in life, like ummmmmmmmm making lots of money HA AH AH AHA AHAH! $200 bucks is a joke lots and lots of folks.
This is a good video if you have a ceiling greater or equal to 244cm. If your ceiling is lower than that you will not be able to get the cupboard upright after you build it on the ground. You will have to build it all upright. Just a tip!
I have a low ceiling and the Pax will just fit, which is what I want, but probably won't swing in from the floor. So, is it really possible to assemble it in the vertical position?
IMO There are two very important steps not show in the video. 1. The back hardboard (that's nailed on) does more than simply give the wardrobe a white back. It's crucial to giving the wardrobe strength and most importantly it keeps the wardrobe square. So tack it on with a couple of nails first then measure diagonally to make sure that the wardrobe is square and not a parallelogram. Otherwise your wardrobe will look wonky and the doors will not align properly. 2. Fixing the wardrobe to the wall. These tall wardrobes must be fixed to the wall. Otherwise you run the risk of them toppling on to you. In fact In think the back is put on upside down. Because there are gaps in the back panel for the mounting plates. So it's not assembled properly. See other comments about the bottom hinge hitting the drawer too.
I followed this video, step by step. When I had finished, I realized that he (& consequently I) had put the back board on upside down. I thought at the time that it didn't seem right, but I just followed the instructions...
Read the directions Ikea sends with the product , never mind these videos. Read, comprehend, mock up and visualize. Get a friend, by some beer after the work. Or take them out to eat. Life is simple.
Just a quick tip it’s easier to install the pax with the sides upright instead of flat to ground. This allows you to manoeuvre easier without having to lift the larger boards on top of one another especially when doing it yourself. Simply stand the larger sides up with the back facing up attach top and base once everything is tightened up the wardrobe is facing the right way to fix the backing board. This way you can stand it up without damaging the unit. I made this mistake by trying to turn the wardrobe over and everything split with ease! Fitted a fair few of these now and find this is the easier way.
The back panel is made to look like a quick nail job but you can really save yourself a lot of grief later on if you make sure that it is square and the long sides are not bowed in at the middle. Get a large straight edge or other piece of IKEA to align everything. Otherwise you are going to have crocked doors and draws that hang.
Did anybody notice you put the back on upside ? The wall mount holes were on the bottom. Easy fix though, just drill some more holes at the top through the wall brackets. That is if your screwing it to the wall. I'd recommend it, it helps keep the doors square and stiffens up the whole unit for a sold feel.
Does the bottom drawer have problems pullling out because of the hinge? I wasn't sure you could put a drawer at the bottom with the doors, I bought 4 and was going to exchange one for a basket after seeing the assembly instructions recommending to start drawers from the 7th hole when installing with doors.
Thank your for this instruction! I have bought one big Komplement and 2 small. The manual is the same and after 1 Komplement the other two went very smooth.
Best video! I feel ready to start assembling mine...but question: I was told you couldn't put a closed drawer at the bottom because it rubs on the hinge of the door. Is this the case or not? You did not fully open the last drawer to the right...thank you!
Thanks for posting this. I put 3 of them together 8 years ago and just needed a refresher on how to put it together so I can do the reverse bc I need to take them apart.
you can squeeze it in if the hinge only touches one side of the drawer like here. It will scrape, but the door will close and you can pull out the drawer. I dont advise it unless it's for a drawer that you dont open often. If you have hinges on both sides of the drawer it wont fit. I have a similar setup that I just installed doors in. There's a reason he skipped showing the bottom drawer opening at the end of the video.
How is the quality of Pax wardrobe? I'm used to solid wood furniture, and that doesn't look to be one, even though it looks great. How is it for 5-10 years long duration? Any thoughts? Thanks!
of course is not solid wood but chipboard! IKEA gives 10y warranty. By the way just bought a combination of 2pcs 1m frame and 1pcs of 0.5m frame, a divider, 2pcs 1m drawer, 2pcs hanger racks, 3pcs 1m shelves, 5pcs 0.5m shelves, 4 doors, 1 mirror door, total 850€ in IKEA Greece.
I was really hoping to see how you put the hinges together. There are no close-ups. I have a house that already has an Ikea kitchen installed and I had to take some of the doors off to do some painting, and now I can't snap the big doors back on. All the small doors snapped on pretty easily because the hinges are different. But I have two tall doors on a pantry area that are about 5 ft long with some pretty heavy duty hinges on them. Too bad your video doesn't show how the hinges snap back together because they are designed to just pop off, and they did, but popping them back on is a completely different story.
It would be so nice to be able to modify this to hold a table or a tray drawer to put a sewing machine while also storing all the sewing tools and fabric.
Joli boulot. Ça a l’air d’être facile. Mais la pratique doit être très difficile. J’aime beaucoup ces pax IKea car on peut crée son propre armoire et dressing à moindre coût. Merci pour le partage
Did you fix the wardrobe to the wall ? I am looking to buy one but my area that I am wanting to install has the skirting, so not sure if it is possible to fix it to the wall.
Have you had any problems with the right bottom drawer hitting the hinge? Did you use standard Ikea hinges? I keep reading in forums about people having to use a router to to allow the bottom drawer to clear the hinge but in your video it seems to work well.
If u live in rented apartment and u have to chenge your apartment and move its be assemble and what if its break what u thing do u suggenst this for rental apartment if it sutidy or not .
No didn't, it is stable enough. For wall mounting, mark the two holes from inside with the wardrobe against the wall, then pull it aside and drill two holes and secure with 45x4mm flat head screws.
Just make sure you are screwing into wooden studs or drilling and plugging into brick, stone etc. Plasterboard fixings are available but perhaps not up to the job in hand. You don't want something this size tipping over!
Great video, thanks! is your Pax frame come with the door or did you buy the door seperately? The reaseon I am asking is I got the Pax frames first (92 7/8" height 19 5/8" wide). I want to add door after(oops). I notice the forsand (and other models) doors is 19 1/2 x 90 3/8, Will it fit to the Pax frame?
Amazing, went to the Ikea today and when I tried to build a PAX Wardrobe with the exact same layout as yours it told me I could not fit the door in it. How is your advise on this? Apparently you can do it like this...
loladin100 i think its because of the right side last bottom drawer. It may cause friction from the hinges to the drawer if not fixed properly. I got that issue assembling the almost same layout so i change the last bottom drawer to basket, it gives more space to the hinges to work properly.
My man why you not install the hinge on the bottom right? I think its bcoz the drawers wont shut. I hav the exact same problem. I have 3 drawers instead of 4 like u. I scratched the side of the bottom drawer, so i just took it out n kept the hinge, but u did the opposite. Urs looks better but is your door secure with one less hinge. Anuva thing i only hav 1 hinge top middle and bottom but i can c u have 2 hinges in da middle. Is that why you wer able to leave the bottom right hinge out bcoz u hav 2 hinges in da middle? Please help me out, ill like share subscribe all of that.
@@learnshare that's not possible to put the drawers on and have the doors on. It doesn't make sense. Can you make a new video explaining how you managed to make it work
hi! i bought the exact same wardrobe as you after watching this vid but bc of the right lowest drawer(i think), the right door doesn't close properly :( what should i do?
Ours was a nightmare to assemble and comprised of mediocre quality parts. All metal parts were made out of jelly, most were ruined by a standard Wera screwdriver. Very bad quality. Bought in Sofia, Bulgaria.
Watch next:
➥ How to renovate my old house czcams.com/video/EbKQF-NstcA/video.html
Playlist DIY Home Improvement czcams.com/play/PLQJGHOK40fH_ujAXKWHTGGV8kDQcBAqwy.html
➧ IKEA PAX sliding doors wardrobe, BIG kitchen cabinet czcams.com/video/jCa1StJVlzw/video.html
➧ IKEA PAX Wardrobe assembly, 2 doors with soft closing hinges. czcams.com/video/RYgbe8mTaMU/video.html
I want!
It's NOT HARD PEOPLE...I put the whole IKEA PAX closet at age 69 alone and it came out great and love it. Thanks for your video which helps and I am not paying $175+ to have someone put it together for me. Just watch DIY and it's easy.
69
Thank you, I’m going mad reading all these comments about how hard it is. It’s the same system EVERY piece of ikea furniture uses to assemble and it’s like putting bricks together.. how do people not figure this out ?
@@sarahdiehl9156
Some people have money and want to come home and have it done , rich folks don't care about thinking, they have enough to deal with in life, like ummmmmmmmm making lots of money HA AH AH AHA AHAH!
$200 bucks is a joke lots and lots of folks.
This is a good video if you have a ceiling greater or equal to 244cm. If your ceiling is lower than that you will not be able to get the cupboard upright after you build it on the ground. You will have to build it all upright. Just a tip!
This would have been a bad oversight had I not seen your comment. Thank you so much for saving me a bit of heartache.
I have a low ceiling and the Pax will just fit, which is what I want, but probably won't swing in from the floor. So, is it really possible to assemble it in the vertical position?
IMO There are two very important steps not show in the video.
1. The back hardboard (that's nailed on) does more than simply give the wardrobe a white back. It's crucial to giving the wardrobe strength and most importantly it keeps the wardrobe square. So tack it on with a couple of nails first then measure diagonally to make sure that the wardrobe is square and not a parallelogram. Otherwise your wardrobe will look wonky and the doors will not align properly.
2. Fixing the wardrobe to the wall. These tall wardrobes must be fixed to the wall. Otherwise you run the risk of them toppling on to you. In fact In think the back is put on upside down. Because there are gaps in the back panel for the mounting plates. So it's not assembled properly.
See other comments about the bottom hinge hitting the drawer too.
He made this look so easy, it is not
I second that, it is not. Not when you're tiny, pregnant and alone😅
It’s easy when you know how to do it, I guarantee this guy has done at least 20 of these....otherwise, it’s too much for most regular people.
@@alzabo I just ordered my first wardrobe from IKEA and I built it alone and it isn't difficult
It took two heads to put together for me
I followed this video, step by step. When I had finished, I realized that he (& consequently I) had put the back board on upside down. I thought at the time that it didn't seem right, but I just followed the instructions...
Read the directions Ikea sends with the product , never mind these videos.
Read, comprehend, mock up and visualize.
Get a friend, by some beer after the work. Or take them out to eat. Life is simple.
Wow. I rarely do diy projects but this definitely looks manageable! Will give this a try in our guest bedroom. Many thanks for the video.
thank u so much! i managed to do the inside of my pax wardrobe with your help 😊👍
Just a quick tip it’s easier to install the pax with the sides upright instead of flat to ground. This allows you to manoeuvre easier without having to lift the larger boards on top of one another especially when doing it yourself. Simply stand the larger sides up with the back facing up attach top and base once everything is tightened up the wardrobe is facing the right way to fix the backing board. This way you can stand it up without damaging the unit. I made this mistake by trying to turn the wardrobe over and everything split with ease! Fitted a fair few of these now and find this is the easier way.
The back panel is made to look like a quick nail job but you can really save yourself a lot of grief later on if you make sure that it is square and the long sides are not bowed in at the middle. Get a large straight edge or other piece of IKEA to align everything. Otherwise you are going to have crocked doors and draws that hang.
19 minutes in fast-speed video = kiss your Sunday goodbye ;-)
Did anybody notice you put the back on upside ? The wall mount holes were on the bottom. Easy fix though, just drill some more holes at the top through the wall brackets. That is if your screwing it to the wall. I'd recommend it, it helps keep the doors square and stiffens up the whole unit for a sold feel.
really love to see/hear hammering at that speed
I got the 4 door PAX/GRIMO to assemble this weekend on my own....I'm terrified! Wish me luck!
Does the bottom drawer have problems pullling out because of the hinge? I wasn't sure you could put a drawer at the bottom with the doors, I bought 4 and was going to exchange one for a basket after seeing the assembly instructions recommending to start drawers from the 7th hole when installing with doors.
Thank your for this instruction! I have bought one big Komplement and 2 small. The manual is the same and after 1 Komplement the other two went very smooth.
Awesome Job!!!! Very Detailed!!!! My Teenage Boys
Always put mine together! But I like looking at CZcams in case they run into a Problem! 😅😅😅
Best video! I feel ready to start assembling mine...but question: I was told you couldn't put a closed drawer at the bottom because it rubs on the hinge of the door. Is this the case or not? You did not fully open the last drawer to the right...thank you!
Thank you so much. It makes more sense now!!!
Thanks for posting this. I put 3 of them together 8 years ago and just needed a refresher on how to put it together so I can do the reverse bc I need to take them apart.
Hi, how did you manage to have a drawer where the door hinge is?
Federico Zambon agreed...the drawer is scraping against the hinge! Help!!
As far as I know it should be impossible
you can squeeze it in if the hinge only touches one side of the drawer like here. It will scrape, but the door will close and you can pull out the drawer. I dont advise it unless it's for a drawer that you dont open often. If you have hinges on both sides of the drawer it wont fit. I have a similar setup that I just installed doors in. There's a reason he skipped showing the bottom drawer opening at the end of the video.
Great overview. But I was disappointed to see it was just the assembly and not attaching it to the wall.
The reason i hate Ikea is that so many parts need to be assembled. However, you made it seem so easy!!
This is amazing !!! Could you make a list of the items need to get this setup
A complete and intuitive assembly manual comes with every IKEA cabinet.
Very nice. Thank you for this.
How is the quality of Pax wardrobe? I'm used to solid wood furniture, and that doesn't look to be one, even though it looks great. How is it for 5-10 years long duration? Any thoughts? Thanks!
Rhaegar Targaryen I’ve used it for 5 years now with 3 moves! That means breaking it down and rebuilding 3 times. It’s awesome! Worth the money.
of course is not solid wood but chipboard! IKEA gives 10y warranty. By the way just bought a combination of 2pcs 1m frame and 1pcs of 0.5m frame, a divider, 2pcs 1m drawer, 2pcs hanger racks, 3pcs 1m shelves, 5pcs 0.5m shelves, 4 doors, 1 mirror door, total 850€ in IKEA Greece.
I was really hoping to see how you put the hinges together. There are no close-ups. I have a house that already has an Ikea kitchen installed and I had to take some of the doors off to do some painting, and now I can't snap the big doors back on. All the small doors snapped on pretty easily because the hinges are different. But I have two tall doors on a pantry area that are about 5 ft long with some pretty heavy duty hinges on them. Too bad your video doesn't show how the hinges snap back together because they are designed to just pop off, and they did, but popping them back on is a completely different story.
Hi, lovely video! Question, which parts came with the wardrobe and which did you buy separately?
All of them comes from IKEA
How do i get one of those? The handyman i mean😁
It would be so nice to be able to modify this to hold a table or a tray drawer to put a sewing machine while also storing all the sewing tools and fabric.
What were the dimensions of your wardrobe ? This is a great Pax Combination
Hi, pause the video at czcams.com/video/RYgbe8mTaMU/video.html 👍
Hello. what is the thickness of the thick wall? I mean the left wall of the drawers. or tell me: what is the internal size of the opening for drawers
Joli boulot. Ça a l’air d’être facile. Mais la pratique doit être très difficile. J’aime beaucoup ces pax IKea car on peut crée son propre armoire et dressing à moindre coût. Merci pour le partage
Did you fix the wardrobe to the wall ? I am looking to buy one but my area that I am wanting to install has the skirting, so not sure if it is possible to fix it to the wall.
Good job! Thanks! Can you assemble mine!
Have you had any problems with the right bottom drawer hitting the hinge? Did you use standard Ikea hinges? I keep reading in forums about people having to use a router to to allow the bottom drawer to clear the hinge but in your video it seems to work well.
Just position the hinge 2 or 3 holes above the drawer rail.
Ikea implicitly states that the bottom draw "must" be a basket draw as a railed draw conflicts with the door hinge
What kind of hint nr do you use next to the drawer all the way down?
Do we stabilise it all before picking it up
some close up shots would be nice.
You didn’t show how you drilled the door handles!!!?
Sikandar Zahid came to the video exactly for this!
Came here for this as well
Hi, nice video do they have something to nail the wardrobe to the wall so it does not fall off on kids.
Yes. The wardrobe can be secure to the wall with screws,.
very nice video.
Has anyone been able to find a better version of something like this? Ideally that comes apart easy for moving.
Is this the 75cm wadrobe or 100cm?
If u live in rented apartment and u have to chenge your apartment and move its be assemble and what if its break what u thing do u suggenst this for rental apartment if it sutidy or not .
Normalement quand on met une porte on ne peut pas mettre de tiroir dans le bas su caisson uniquement une corbeille comment avez vous fait ?
I think the trick is to do it slowly and not race ahead…xxx
Did you fix it to the wall? If yes can you please give us tips on best way ? Thanks great video👍
No didn't, it is stable enough. For wall mounting, mark the two holes from inside with the wardrobe against the wall, then pull it aside and drill two holes and secure with 45x4mm flat head screws.
@@learnshare which is harder to do when you nail the back the wrong way round🤣
Just make sure you are screwing into wooden studs or drilling and plugging into brick, stone etc. Plasterboard fixings are available but perhaps not up to the job in hand.
You don't want something this size tipping over!
When my husband and I lifted the frame upright it completely fell apart and broke.
Hi just to know can you give me the name of the Plastic plate you used to cover the screws for the sides thanks
Great video, thanks! is your Pax frame come with the door or did you buy the door seperately? The reaseon I am asking is I got the Pax frames first (92 7/8" height 19 5/8" wide). I want to add door after(oops). I notice the forsand (and other models) doors is 19 1/2 x 90 3/8, Will it fit to the Pax frame?
I had the measures already, they came all together. 👌
You should measure the width and height of the doors to check if it fits on your wardrobe. Ikea site have the measures in description I guess.
Amazing, went to the Ikea today and when I tried to build a PAX Wardrobe with the exact same layout as yours it told me I could not fit the door in it. How is your advise on this? Apparently you can do it like this...
loladin100 i think its because of the right side last bottom drawer. It may cause friction from the hinges to the drawer if not fixed properly. I got that issue assembling the almost same layout so i change the last bottom drawer to basket, it gives more space to the hinges to work properly.
How long did it take?
what is this one called? i can’t find it in the website bc there are so many that come up
Did he not bolt it to the wall?
it could tumble on the person using it
All PAX wardrobes system can be secure to a wall.
Hi, is the smaller pax wardrobe 100cm wide x 200cm height built the same way ? will this video help me as guide ? thanks.
Yes absolutely.
How to do handles
My man why you not install the hinge on the bottom right? I think its bcoz the drawers wont shut. I hav the exact same problem. I have 3 drawers instead of 4 like u. I scratched the side of the bottom drawer, so i just took it out n kept the hinge, but u did the opposite. Urs looks better but is your door secure with one less hinge. Anuva thing i only hav 1 hinge top middle and bottom but i can c u have 2 hinges in da middle. Is that why you wer able to leave the bottom right hinge out bcoz u hav 2 hinges in da middle? Please help me out, ill like share subscribe all of that.
I like is are you so good 😊
Is the height 236 or 201 option? Thanks
This one is 236 height.
Did you get handles
What speed is the playback? What was total build time?
1hour more or less.. Do it slowly.
MERHABA. DOLAP KAPAĞINI TAKARKEN MENTEŞELER ÇEKMECEYE SÜRTÜYOR.ONU NASIL YAPTINIZ?
What was the total assemble time? How long did it take?
40 min. Take your time.
How can I buy
How much is it for the whole base? I assume with each cool add on it adds up to be super expensive
Is it fixed to walls.
Yes it can if you wish, pax wardrobes gives that possibility.
What door hinges did you use?
From IKEA, they come with in the package.
@@learnshare that's not possible to put the drawers on and have the doors on. It doesn't make sense. Can you make a new video explaining how you managed to make it work
Bro the back panel is wrong
hi! i bought the exact same wardrobe as you after watching this vid but bc of the right lowest drawer(i think), the right door doesn't close properly :( what should i do?
You cannot have a lower drawer with doors as hinges will hit it, only a basket will work
what is it called exactly bc i can’t find it on there website
Thumbs up for the 90’s porn music xD
Men show how to install a wardrobe, while women show what to put in.. Lol
My drawer won't go past the hinges😭
works only with the basket.
It's really bad practice to have the dowel tighteners visible on the top and bottom. Just opened out own and notice this. Shocking quality from IKEA
He used a power drill to do a quarter turn retainer??? 😂😂😂NO
🌹❤️👌
do u have a link for the wardrobe? cant find it on ikea!
You'll find in ikea website for sure. Bedroom section, or search for PAX
@@learnshare i can’t find this exact one either there are to many
I can’t hammer the the metal feet in
Do not use power tools, buy Ikea set and screw by hand...too easy strip and destroy the hardware.
Ours was a nightmare to assemble and comprised of mediocre quality parts. All metal parts were made out of jelly, most were ruined by a standard Wera screwdriver. Very bad quality. Bought in Sofia, Bulgaria.
This is true of ALL IKEA stuff.
First at least let us know the sequence of opening the boxes ..
Eg. open no 3 box first or open no 2 ... whatever it is....thanks
Pointless considering you didn’t even show how to put anything up expect you fitting a cupboard... waste of time