Customer States (Best of May & June 2022) | Just Rolled In
Vložit
- čas přidán 13. 07. 2022
- Welcome to Just Rolled In and the customer states compilation (best of May & June 2022 recap episode). Hope you enjoyed the video and please consider leaving a like or subscribing (if you want). Thanks for watching!
If you want to submit your customer states photos/videos, you can do so via our website.
www.justrolledinyt.com/
👉(Not all content sent in will be used and it MUST be yours)👈
Just Rolled In Merch (all profit from merch sales donated to local foodbank)
www.justrolledin.shop/
👉Follow Just Rolled In on Social Media👈
Facebook - / justrolledin
Instagram - / justrolledinyt
TikTok - / justrolledin
Credits (in order)
Cut in the frame - / carsonbillingsley
Sounds like Kazoo - / logstoy
Racoon - Jacob Handy via ViralHog
Upper ball joint (F-150) - / avtekk
Drove wrong way in the parking garage - / popaustin
Ferrari - / sebsauto
Customer declined service (no oil on dipstick)
/ mtutripz
Tape on tire (tesla wheel)
/ agustin_j16
Chevy truck drove in (wheels positive camber)
/ ladiesman0217
Chevrolet Spark - won't start, no fuel
/ mazdaspeed_
No fuse installed in circuit
/ thunderjet922
Turtle in Windshield
Latonya Lark via ViralHog
Bubble tire explodes (Red GMC Sierra)
/ mechanicmike19
Customer drove over a branch
/ oddroach
Last clip
Anonymous user via ViralHog - Auta a dopravní prostředky
This is a recap of the best photos and clips of May and June 2022! Back on Monday with a new episode.
I was wondering why I kept seeing loads of videos I’ve already seen haha
@@isaacsrandomvideos667 lol thats why i put it In the title, description, pinned comment and first 15 seconds of the video 😜
@@JustRolledIn lol
These recap videos are great because all of your content is definitely re-watch material!
@@JustRolledIn as I have said to you many of times, I don't know what's worse, customers doing wiring jobs from hell or the fact people are dumb enough to completely fill the engine oil up to the oil cap. But the customers friend who added oil to the coolant needs to stay away from cars in general.
6:42 What sort of idiot puts clear tape over their tire like that?
It's a Tesla wheel, they needed to use electrical tape.
What kind of idiot? A retard , that kind
Nice solid reply 🤦🤡💪👍👍👍🍻
Good one 👍
You need to rethink that. He should have used Flex-Seal!!
🤣🤣🤣🤣
Those air filters with the plastic still on them are why we have warnings on all plastic bags about the suffocation hazard
They need those warnings for suffocating cars too
🤣🤣 I can't even fathom what the person would look like that would do such a thing I can only say blonde or 90 year old grandma definitely not Grandma
Why else do you think they have to put 'OPEN OTHER END' on so many products!
@@Odin029 They need warnings to emphasize the warnings on the warning labels...
@@sharonnicholson3393 nah, probably some college douchebag named kyle or bobby
The tail gate falling open when shutting the door made me outright giggle.
LMAO I straight up had that happen with out 2009 dodge ram work truck. Pissed me right the F off! Especially when it happened in front of a cop as i went of tracks!
When I was a teenager my mother had a car where the windows rolled down every time you closed the door.
@@celticphoenix2579Was it german car?
I've had same issues. The wiring harness VAG uses for doors gets flaky over time.
@jhutt8002 I honestly don't remember the make. We got it second hand and it came with the quirk. That car was so bad even the crooks didn't want it. We left it one night with the doors unlocked, windows down and keys in the ignition in an effort to get it stolen. No dice lol.
Happens to mine. Its because he has a lower trim and the mechanisms are plastic. Plastic froze and broke in the winter. Gotta close the tailgate oldschool style.
I am certainly not the most mechanically inclined person, but this channel makes me feel like a damn genius in comparison!!
"A man's gotta know his limitations"
-'Dirty' Harry Callahan
😂😂😂
Exactly
Me too
At least you know not to make homemade repairs 😂
Think of how stupid the average person is, and realize half of them are stupider than that
"The customer ended up cutting out a piece of the frame." and "The customer drilled a hole in their brake booster." are two sentences that I understood right the first, but still replayed two more times being like "wutttt?". I like the Ferrari giving that 70s farmers pick up truck interior experience.
I have to admit its the first time I've seen a beater Ferrari.
So many unanswered questions about the Ferrari
First thought that came to mind was stolen Ferrari.
It should be illegal to treat a Ferrari like that. WTF are they even...who does that? I don't care if it's a stolen car, it's a damn shame
@@BigLeBowski4456 bingo
Anyone who discharges a weapon while “cleaning” it should not have a weapon in the first place.
Anyone that believes these bullshit videos and explanations should be deported back to Mexico. We have enough dumb asses in America
More likely someone shot at his wheel while he was driving during road rage and he didn't want to report the incident.
Unless they're pointing it at their own face at the time, then both the issue of whether they should have ownership and them possibly polluting the human gene pool are both resolved.
Yeah, maybe we should have laws to prevent this... Could have gotten someone killed.
There are more people killed by drunk driving and crashing than by gun's😂
9:13 That turtle will have one hell of a story to tell his friends.
The moment you realize you really never know if the guy infront of you ran a wire through their brake booster or notched their frame to run powersteering lines.
Better the guy in front than the guy behind, that mofo aint stopping in time with his vented brake booster.
Yeah,I'd say that brake rotor was "shot" 😅😂😂😂
I like they paper thin rotor.
Well at least they got their money’s worth.
Na just need some machining, they'll be good as new
@@smithy2 Yep! Low cost drilled venting!
Razor thin.
Now they are clearly ventilated.
If someone told me even half of these things actually happened, I wouldn't believe it. The videos are astonishing. And it appears these things are common, every day. Wow!
When you work as a dealer tech, you see this type of stuff everyday.
People are seriously fking stupid and I mean STUPID
What's even scarier to think about...All these broke ass cars are on the same roads as you and your family, pointed straight at you in the opposite lane at 75MPH.
It amazes me how so many humans are oblivious to vehicle wear and tear and or comfortable with the idea of roll it till the wheels fall off. Machines break down with use. They require maintenance! Lmao
dont u guys in US have yearly maintenance checks? Im not saying dumb things dont happen here in EU but... i rattling license plate, wiper being blocked by emblem, how people are so dense? Then condition of come cars on the road, i watched similar channels from EU and we get blown engines, but not rusted thru cars that are still allowed on the road.
The Atv air filter fix with that little tap-a-rue is hilarious 😂.
Just give it a little tappy. Tap tap tappa roo.
2:20 Not what I expected by “his brakes are shot” 😂😂
"ok we'll put new pads in, makes sure everything is work-"
"No I mean shot. As in with a gun. My gun in fact..."
Dr. House: "Why do people lie to me?"
Auto Mechanic: "What? You think you have a monopoly on that problem?"
Got that right can't say it any better!
Best comment so far!!
I.T Department: "I think you are forget about someone bud!"
I nominate dental technicians. “Of course I floss every day!”
Every vehicle owner should be required to watch this channel 👍
Car owners really only need to know about brakes and oil changes, most people sell theirs cars before having to change or fix anything else
@@Scythe_Voltage no thats B.S. excuse. You should have some knowledge to know when its a job for a Tech and when to STOP LYING about what happened. Your comment is so insane like seriously? Ppl should just ignore everything? No they should FOLLOW the matinence schedule in the owners manual and AT LEAST be familiar with simple functions of a car. Attitudes like yours is WHY this channel has so much content
I will agree with you Yes some of the videos on this channel should be shown during Drivers Education, and if you think about it even further way back in the day when cars were still the newest things out there the owners manual actually told you how to do timing and adjust the valve springs and stuff like that, now when you open the hood of a car there are more warnings about don't touch when hot and don't do this or that.
With the stupid shit I've seen myself, I absolutely agree.
Wouldn't help these types of owners.
The little pat pat the mechanic gave the air filter, at the ATV was really funny. xD 5:35
I do my own car maintenance (minor stuff like oil changes, brakes, rotors, air filters, stereo installation, etc.. easy peasy stuff) and these compilations make me feel so much better about myself because it makes me realize some are incapable of performing even those menial tasks, or they just dont care to.
And yet supposedly 'easy peasy' stereo installations seem to be a major and not infrequent source of significant mechanical defect lol
@@harryricochet8134 mines going strong. They literally color code the wires.. I can't be held responsible if people can't match up colors lol
@@SSSnakePlisken I don't think colour matching is the cause of mechanical defects, with 'mechanical' being the key word, rather than the cutting of structural members and drilling holes through brake boosters to run cables lol My comment wasn't having a dig at you at all rather than the total idiots in these videos who do totally idiotic things to their cars then drive these mobile disasters in waiting on public roads.
I've seen grown adults at auto parts stores paying to have wiper blades fitted. Enough said 😉
The car with no gas in it, still makes me laugh. 😂
We had that at the garage I done work experience in. It was one of the owners car, turned out the fuel gauge was faulty. Nobody working on it thought to check the petrol until about 2 hours in.
@@delta250a That happened to me with my father in laws old car, gas gauge wasn’t working. Lol
$50 in gas plus one hours labor!
I had experience with this when I had a roommate we went to help his mother TWICE and she was out of gas.. When I was at work 12 years later someone said this car needs a jump, it was a ways away and I could hear it turning over... I asked is it a woman driving .. they said yes .. I said it is out of gas.. sorry ladies and yes i was right. Oh and 1/4 tank is empty fill it up when it hits 1/4 tank!
probably thought he had a chevy volt and didn't need gas lol...
I worked at a small engine repair shop for ten years. Seen customers "improve" things. Usually these improvements occurred when a brother in law and alcohol were involved.
I bet often in combination
@@TheRadioknight I had a guy bring in an off road go cart. ATV tires,big motor etc...The CVT belt drive and other parts had crescent shaped indentations. Customer didn't know how they got there. Funny how the bottom of a 5 lb mason's hammer fit those marks. $600 in parts to replace the improvements made by customer using a hammer.
🤣🤣🤣🤣🤣
*Any in law or relative with alcohol and or mj involved...🤣🤣🤣
It always astonishes me that people will go to a shop before even looking at their car. They hear one noise and drive straight to shop without grabbing a second hand to help them listen from outside the car or atleast just looking around to see that they have a 3 foot long log stuck in the control arm of your truck 😂
8:00 TBF that fuel gauge could be a bit more obvious about being empty :D
My favourite has to be the guy who drilled a hole through his vacuum brake booster to run a cable. I wonder what he would have done if the engine block was in the way?
Drill a hole using a longer drill bit, sure thing!.
drill through it...then wonder why he had a bunch of fluid coming out of it.
Tunes are more important than the car! Would've spent a week boring a hole through the block so he got his tunes. F* the car (which only cost $1200, but each rim & tire cost $1450)
Gonna need a bigger drill.
"Nah, we don't need this"
*pulls out piston to make room for amp wire*
I worked in the automotive field for well over 30 years. I started as a mechanic, then a dealership service advisor, then a technical writer, and finally an insurance adjuster. Until I subscribed and started watching your videos, I thought I had seen everything. I was wrong!
Some of the things I saw in the field:
• A guy brought his car into the dealership for an oil leak and rough running. We opened the hood and found one of his connecting rods sticking through the side of the block. Yes, the engine was running.
• A woman brought her car in for "poor handling." We found that the Pittman arm was turned around facing backwards. she said she didn't remember hitting anything.
• Customer brought in a vehicle for new tires. Put it on the lift and as soon as the tires left the ground, the right front wheel fell off, taking the half-shaft with it.
• Woman brought in a car for a new battery. We replaced her battery, she backed out of the stall, and immediately pulled back in complaining that there was something wrong. She had a broken engine mount and claimed that we broke it. While replacing the battery. Store manager bought her a new engine mount and I got paid to replace it.
• Guy said he had to push the brake pedal too far to get the car to stop. We found that his front rotors were completely worn away. His brake pad backing plate was pressing on the cooling fins inside the rotor. There was NO friction surface left at all.
These are just a few that come immediately to mind. But they are all from the days before we all carried video cameras in our pockets. You and your contributors keep up the good work. You're a source of endless amusement for an old hand like me.
Oh, I’ve got one that hasn’t been topped yet…I worked at a Kenworth repair center in Reno NV. We had a truck come in needing a new clutch (at least that’s what the seven guys in the truck said). We stopped them at the front of the lot because something smelled like raw sewage. The shop manager asked what the smell was from.
They said they cut a hole in the sleeper floor so the guys didn’t have to stop for bathroom breaks. They just pissed and crapped through the hole as the truck rolled down the road. The entire underside of the truck was coated in human waste.
When we refused to allow them to even park in our lot, they left. We immediately called a former mechanic who was now a commercial weighs and scales trooper with the Nevada Hwy Patrol. The truck was stopped leaving the International truck repair center across the street from us.
The seven guys were all arrested for being in the country illegally, no licenses, false insurance/registration, and having a bunch of pot in the sleeper.
Considering that they'll screw you over for dropping a battery in at 95.00 for something that takes 30 seconds...
Now an A/C charge is like 250.00! That's effing insane.
Yes but have you ever had to replace a customer's missing double ended dildo?
@@windsofmarchjourneyperrytr2823 you know you can just learn to do all of those things easily, right? Lol. This world is sad.
Not that epic, but once a women brought her car into the workshop, cause the gear shift is sticking, and the clutch bites to low. There were like 3 layers of rubber mats in the footwell stick under the clutch pedal.
5:06 we did it boys, we found whistlin diesels Ferrari 🤣
9:16 the green shell failed
Out of them, I loved the brake job on the boat trailer with 50 lbs of red grease on everything including the rotors. Nice.
Maybe the mobile mechanic was just making sure no unnecessary friction would occur ;)
Seriously, what level of moron was that mobile "mechanic"? His tools need to be confiscated ASAP!
I REALLY couldn't grasp the concept of what in the FUCK he was trying to accomplish there.... 😕
This grease build up happens a lot when people use bearing buddy's. The grease pressure blows out the bearing seals, then people just keeping pumping grease into them. I'm sure the mechanic did a fine brake job, then the mechanic or owner did the grease packing.
Bearing buddies are bad news!
@@festersmith8352 Bearing Buddy's aren't a complete waste of time, as long as someone doesn't pump an entire tube of grease into it. A pump here or there isn't a bad thing, but a guy had BETTER keep track of how much he pumps in, in between actually disassembling and performing a real service and inspection to the bearings.
That K&N filter worked so well it even filtered out the air!
The thing I think of most when watching these videos is that these people are out on the road with the rest of us. Makes you feel safe out there doesn't it??
Yeah it really does, a bunch of vehicles are one pot hole away from falling apart.
I’m from Pennsylvania and we have to have our vehicles inspected once a year. Growing up in the 60’s and 70’s it used to be twice a year. Actually I think all states should have all vehicles ; cars especially, inspected every 4 months. Yeah I know , everyone will be bitching that they don’t have the time but too bad
@@Retired88MYou Should take A GOOD LOOK at How it's Done in Europe. EVERY CAR MUST HAVE A YEARLY INSPECTION. You'll Never see ANY CARS that look like Any of these Death traps.Yes, like you said, these INSPECTION MUST be Done to get this Junk off the Road.
I worked as a mechanic for 35 years and thought I had seen it all.
Not even close. Love this channel!
I'm glad I got out of it professionally when I did. Still did some work on my own and seen a lot, but a lot of this is mind boggeling.
Had one call me up to see why his new 350 engine install wouldn't start. Opened the hood and immediately noticed the fuel line connected to the bottom vacuum port on his new Edelbrock carb. Gave him my advice to follow to keep the engine safe from harm. He didn't follow it and engine lasted about 500 miles.
His father had classic car collection. Dumped about 2 gal of gas down the carb to get it going, cause he thought it wasn't getting any. Filled the crank case. Gave him the same advice I did to his son. But like son like father. that engine lasted about a 1000 miles. This one turned out to be the carb was already flooding over into the intake. He just added to the problem.
Those 2 kept me busy for years, until my divorce.
They loved duct tape too.
@@festersmith8352 Yeah, the business is the pits nowadays. I feel for the guys getting into the business.
I had a roommate wrap his leaking tire in duct tape. The WHOLE tire...duct taped. He said he didn't feel like putting the spare on. It's hilarious to picture this +6 ft., 250 lbs. man-child sitting on a crate next to his jacked up Grand Am, spinning that wheel to wrap it. Wearing flip flops, no doubt. No, it didn't work and it never left the driveway like that because I put his spare on. It's a bit un-nerving to know that vehicles like these are on the highways. Even more so knowing these idiots are operating them. Stay safe out there, everyone. Thanks for the video!
What if his whole plan was to get you to put the spare on? :P
@@GaldirEonai I'm sure it was as that was my job at the time. I was working in my dad's tire shop. I took it to work the next day and put a set of tires on it. He paid my wages that week. I hate that he wasted all the duct tape, though. LOL
it wouldn’t save him any time at all anyway cuz he’d have to jack up the car anyway and more than likeley take it off and put it back on. what a fucking tard!
It never ceases to amaze me the amount of work and effort people put into half assing something instead of just doing it right... Sounds like your roommate did a lot more work than just changing the damn tire
The spare can cause damage to cars if one wheel is a lot more worn out than the spare. It can be especially damaging to modern 4x4 systems. I don't blame him.
" One of the technicians removed the chicken and took it home "... and cooked it! :D
It was alreary half done !
@@marcryvon yeah but he was smart and wedged it in next to the exhaust manifold so it was done by the time he got home
Man's gotta eat.
2:14 A rare moment when the customer is quite literally truthful 🤣
Just found this channel and I'm in fits of laughter! Thank you 😁
1:45 customer declined all repairs, and is now short one "friend"
i've made a few mechanical mistakes in my time but I feel like a genius when I see these
Great videos. I made some stupid mistakes trying to do maintenance myself. Lessons learned in life.
2:53
Ayyyyy, my chicken picture made it into the highlight video, too!
Thanks for showing it again! 😁
I’ve been slowly teaching myself about cars for years now through friends that are mechanics. And I see these videos and think to myself “thank god I’m not this stupid”
I’m surprised some of these people can even tie their shoes, kinda crazy to think that there are people this dumb among us
I agree... Idiocracy is an EVER increasing problem in the world today.. 😕
Ong im 16 and thinking the same thing i google and CZcams search for hours before doing anything lmao
@@davelowets Sir, Idiocracy is a movie. Not a real word.
Same here. Who has the wherewithal to know what an air filter is, to google the right model for their car, but then proceed to leave the plastic wrapper on or put it in the wrong way?
Man, it's just criminal, seeing the condition of that Ferarri. I'm no sports car buff, but even I know to respect those cars.
I’m convinced the context of the clip was made up by whoever sent it. That Ferrari is probably a junk car and the person recording made up a “customer states” situation just to send in a clip
If it was one of those Saudi Arabian Nomad's cars I could believe it. Yes there really are tents in the middle of the desert with Lamborghinis parked outside! 😆
@@drsipp407 the person who shared the clip has sent in other clips before and he owns his own shop. He specializes in mostly BMW's (shown a clip in another video of a V10 BMW that a customer just bought that needed a new engine). Not at a junk yard. Trust me I was asking him that as well lol
@@JustRolledIn I did not know that lol
@@drsipp407 no worries, thought i'd let you know. I try my best to get the full story from every mechanic/technician
7:00
That looks like an animal attack, maybe a bear or an animal with sharp claws.
The flashlights being used as fog lights made me chuckle
Hey, I mean, if it works, it works.
Wrenched for years and everytime i think about opening a shop I watch these videos and instantly go back to the construction trades.😂🤘
I'd charge a "moron tax." Especially if they were arrogant about it. Like not fixing a tire egg IMMEDIATELY.
Yep I used to be a tech at a small shop that was just me and the owner who kept wanting me to buy it. I ended up becoming a machinist lol
@@kmilli0313 Good choice
@@windsofmarchjourneyperrytr2823 What the hell is a "tire egg"? 🤔
@@davelowets if i had to guess i'd say a side wall bulge
9:07 Mario Kart IRL
I came looking for this comment
These are incredible 😂😂😂
Great clip thank you
“Is that a bullet hole?”
“Why yes it is”
11:16 that might actually be ok.
I've seen several smaller, light duty machines that use grease as lubricant for power take offs and drivetrain boxes. When warm it will flow better than in that clip and it looks pretty clean. Its common practice to pump grease into tiller chain boxes when the lower seals give out and the oil is gone.....never had one fail yet with grease in it!
8:10 WOW
I mean all of these are insane but this one. WOW 😀
Gotta say I’m pretty impressed with the flashlight fog lights
7:45 - "I know what's wrong with it! It ain't go no gas in it!"
I feel for that guy with the nasty project car engine, what a nightmare that would be to clean
Thats someone who NEVER changed their oil. Thats how u get sludge like that
Buy a beamer for a project car. You get a whole lot more than just the car
That’s why you check an engine over fr before you buy it
@@Cynsham And don't buy it if the dipstick makes a sucking noise when you pull it out.
Yeah nah, give it a pressure wash and a bottle of engine clean and she'll be right.
Accidentally blowing up the trash can has got to be the best bit. 😂😂😂
The best bit was one of the employees running for the exits and not offering any assistance! 😄
So much gold in just 1 video! Excellent!
I worked at a midas when I was in high school. The things that people decline to have fixed isn't just astonishing it should be illegal but the guy who cut his frame for the brake line is certifiable
It IS illegal to decline to repair a safety issue on a vehicle...
Some people are just assholes and dont care WHO they end up hurting later.
@@davelowets they also probably assume the mechanic is trying to make them bite for more services to pay for. Not saying it's the case but customers are paranoid.
@@thunderlifestudios Well then they better educate themselves and learn to fix their own shit, if they dont trust the shop that THEY brought their car TO. They always have the option to have it TOWED to another shop for a second opinion. But NO, some people are just assholes that don't care about others safety.
Did you ever get any ladies calling in about a lost double headed dildo?
When I worked in the repair shop, If we condemmened a vehicle, The only way it left was on a wrecker
That woman in the phone call had me laughing and rolling on the ground!
What was she saying? I couldn't hear clearly
@@warmongrel311 She picked up her repaired car from a garage and was calling back because she missed her double headed Joe (dildo) and ask for return it.
@@warmongrel311 she said did you guys see my double headed dildo, but yes it wasn't very clear as CZcams had to blank out the word.
@@warmongrel311 she was asking if they found her dildo
@@warmongrel311 Her 'Double headed di*do was 'missing'.
@6:00 waterpump issue, i once had a 302, the waterpump went one day, the entire impeller area was completely blocked except where the impeller spun. i was totally amazed that it still cooled anything. they just dont build them like they used to. only changed it because it started leaking at the weephole.
Love this channel!!
3:46 bruh i thought it was a tree!!!!!! LMAO
Watching these videos are both educating and terrifying. Educating on what never to do and terrifying that someone actually had it happen/did it/etc.
And terrifying that these things are driving around next to us on the highway
The cat dad clip warmed my heart 💜
I love the little pat on the ATV filter 🤣🤣
2:58, the chicken: I am so scared...
Thats crazy that he went through the huge job of doing duramax heads just to put RTV. Also as far as the flamable trash bin, I feel that many shops don't take oily rag storage seriously. If there was to be an inspector that day, they would have a massive fine for putting oily rags in an open plastic bin. They even have to potential to spontaneously combust.
My guess low comp they thought it was head gaskets and didnt kno what they where doing. Anyone seeing that scoring would kno it need rebuilt
Like how can someone take the time and effort to get their heads off but can’t spend the $20 to buy new head gaskets?
@@RUSTYCHEVYTRUCK Where are you buying V-8 top-end gasket sets for $20??
If you are, you might as well be in the same camp as the guy who reused the old gaskets with RTV.
Do NOT buy your head gaskets on Amazon fellas... Open your wallet, and buy some good name brand head gaskets. You WILL regret it if you don't.
@@davelowets point is regardless of how cheap or expensive the gaskets are, what’s the point of doing what has to be hours of work only to cheap out at the last second and inevitably have another bunch of work and money to throw in
@@RUSTYCHEVYTRUCK Yep, so buy good gaskets, and spend more than $20. I dont think you've seen the "point" yet.
I am absolutely baffled how someone can ignore the dashboard to a point that they bring their car to repair before they even check that they simply have no fuel
How the flying hell do people overfill their engine by not a quart but by something like 25 quarts... did nothing feel off when comparing the amount coming out to the amount going in?
Because most people are practically retarded, seriously. Not many people know jack sht about sht anymore because they just pay someone else to fix it for them
Or wonder why they are bought in quarts, instead of gallon jugs? Regardless of what you're filling with what, putting in 30 packages should make you wonder if you're doing something that isn't intended.
I dunno, but my mom took her Lexus RX300 to a Lexus dealership and the tech put in oil without... checking it. There was 2x the amount of oil then it should've had. She wrote a letter to Lexus and I don't recall, but I'm pretty sure that tech was fired. (I think it was a courtesy service with the new car or something like that?)
A bloke at my work changed his own engine oil. He said it took him forever. He filled it back up through the dipstick tube.
WAIL I figgurd the way 'at thang burns thru awl, it'd take a whal fer it to git thru thurty corts. Gimme a chance t'rest a whal innyhow. And they tode me I needed brains to be a mechanic!
I yanked the cable plug last year and I'm glad I did JRI . Internet videos like yours are far more entertaining and at more than half the cost of cable TV.
I appreciate the kind comment. I usually don't get those on the recap episodes 😅. Have a great rest of your week, John!
i have not watch TV for 20 years
@@77appyi Torrents FTW!
@@amzarnacht6710 not anymore...
I have never laughed so hard these video's are classics lol
Great episode tonight really enjoyed it keep up the great work guys you're my number one show can't wait for the next one😉😎👍
That K & N filter reminded me of the time my ex sister-in-law cooked a frozen pizza while still in the plastic wrap because the instructions didn't say to take it off. She was quite the tool. My brother is lucky she is gone.
🤣🤣🤣
"She was quite the tool" I love that !! 😂😂😂😂
🤣🤣🤣
Should have done a better background and capability check before marrying her. Why didn't you catch this level of stupidity?
@@samfrancisco8095 you mean why didn't HE catch her level of stupidity......? Me thinks it was good....... Can't say that here 🤔🤣😉 🐈🍆
Clicking on the video thinking, 12 minutes? I don't know. Then it's over in a blink. These videos are fascinating.
Man.. When I see all the rust they show on this channel it makes me feel SO happy I live in south Texas.
Even better the second time around! These always make my day. Enjoy your time off
Some of these clips wouldn't be out of place in the movie Idiocracy.
This vehicle was owned and maintained by a Mister "Not Sure", and it is powered by BRAWNDO (with Electrolytes).
That last clip was hilarious lol.
These take me back to my days of workin in a shop. Should have taken video of some of what I saw 😆
Thank you for this video. I really needed a good laugh this morning.
I’m gonna go on a limb and assume the condition of the Ferrari had something to do with cocaine….
I dunno if i had a car like that and did some blow the next day itd roll out looking brand new..
Oh... I was gonna say more money than brains. I guess same difference.
@@Z-Ack bit more dealing than customer on that one
Lol @ the end. "KOBE!"
Proud Aussie contributing to the videos
@Just Rolled In -
OMG , installing an air filter @ 6:02 without taking it out of the foil , this is a clear DOTY ( = "DAU Of The Year" , see: Dau-Alarm DE .... a DAU ("DümmterAnzunehmenderUser") is the German version of a "PEBKAC" )
Old post. Must be the loose nut between the seat and the steering wheel.
Excellent recap dude, they're all as good the 2nd time round!!
Coolant topped up with engine oil.. Did no one tell them that's not an oil cooler 🤣🤣 that drilled brake booster never gets old!! enjoy your time away bud 👍
Neil ~ Customer is likely the same one who FILLED his engine with oil!
That loving pat. So nice.
Every video has crazy clips. The owners of these cars and trucks r insane!
What a way to make a long hot day a much better one with a video from my favorite channel.
Funny story about how my 302 became a 347, It all started with a simple timing chain replacement...
“His brakes were shot” that got a chuckle out of me
Classic. You went from roaches to gravy. Awesome editing. 😀
The little pat at 5:56. Priceless.
Love the flashlights
the flashlights sold it for me, just incredible
2:19 "Hey Jimmy! That's not what they mean by 'shooting brake'!"
Very enjoyable, thank you!!
These videos help me to not feel so bad about myself.
6:26 I had one like this! Young lady bought an 09 pasaat 2.5 with 156k on it, we got it in the shop at 189k for oil consumption. In that time frame she never changed the oil, just kept adding some every so often when it burnt the crap out of the old stuff. She didn't realize you were supposed to change it and just thought that's what you do. Oil service with engine additives, 2.5 still purring!
Those old 2.5 VW engines were pretty good. A pain when something did go wrong though.
The level of abject idiocy of some people when it comes to being mechanically sympathetic is simply astonishing. Thanks for yet another cringe-inducing episode!😂 ✌️❤️🙂🇨🇦
if you are reffering to the people who refused service.
9 out of 10 times they just use the expensive garage as a diagnostic.
they know someone who can do the work for less then half the price.
Yup "Something's wrong... I think?" when there's a blatantly obvious issue that makes the car sound like a tractor or drive like a walking dinosaur.
Or when you see someone try to duct tape things together/fill in 5 times as much air in tires or literally just fill in random liquids into the containers as they see fit.
Some people are anomalies.
Wonder how many of these fall under the "I don't need no man", category...?
Loved that chicken he just wanted to go to work with his owner 😂.
drilled a hole in the booster to run power line the homemade installs never cease to amaze. Jus seen speakers siliconed in 5gal paint buckets on the back seat
Those flashlight as fog light ..genius 🤣
10:53 That was a bright idea.
5:28- when you try to flex by buying a Ferrari, but you can't afford the maintenance because you're stuck making payments on it. Flex gone bad