for anyone having a problem getting it to power up i had to work around. lots of people have this problem. I have a 2011 XL fleet model and after research online found that the vehicle harness behind the radio doesn't have a key on power source so you have to run a new ACC line to the red power wire on the back. I used an add a fuse to fuse 32 in the passenger kick panel fuse box that was unused since i don't have power windows or mirrors, literally took 5 mins, this bypassed the can bus that came with it tho. i don't have steering controls on the truck so it doesn't really matter for me but everything works now, unit doesn't tell me what vehicle i have though so i'm sure theres some options i'm not getting now but it does what i wanted it to do, can still connect to wifi hot spot and use all apps and for $140 i cant really complain (2g+64g) hope this helps
I’m wanting to put this in my 2010 xl and I’m not sure what you did here, I’m confused. I would really like to upgrade my radio as it’s broken and won’t even turn on. You run the new power wire to the fuse panel?
@@patrickhamilton8962 get this thing called an “add a fuse” from autozone to whatever your parts store is near you and put that in fuse 32 in your fuse box on the passenger side (google where fuse 32 is, you’ll find pics of it) then run a wire from that to the red power cable on the back of the head unit. That’s all I did and it’s been months now and it’s still working fine. Fuse 32 is power windows and mirrors which XLs don’t have but it still gets key on power
@@tjsii4178 you can’t get it to power up? Check to make sure your harness is set up correctly. Then hold the power button, although it should automatically turn on with your vehicle
How do I stretch my wire to the hazard and air bag and tracktion control wire from the back of the radio to the switch on the Apple android 13.0 my wire is to short
I installed this on my truck and it covers up the thing that originally showed the AC controls and now it doesn’t show what temperature each side is on and what the fan mode is
Yeah, blend door actuator - beware, there are 3 or 4 of them, the one behind the 'radio' is a bitch to get out. I am in the process of doing this upgrade, and that part sucks. The radio documentation really is lacking, I had to watch a couple of videos to figure out a couple of points. Thankfully, I knew about a couple of the issues, as I had a JVC KWV330BT previously - loved it, but I wanted GPS, Android Auto and Apple Carplay in the dash.
Blown fuse on 2013 f 150 after I tried installing it without the box lol, it's fuse 29 on my model, after installing it with the box it works fine, I thought it was for steering wheel controls that's why I didn't installed it at first
Either the fuse blew or the harness you got with it is bad. When I installed mine they missed tons of wires on my harness so I ordered a replacement harness and no issues since and it's been 1 year
Awesome work man. Keep it up!!!!
for anyone having a problem getting it to power up i had to work around. lots of people have this problem. I have a 2011 XL fleet model and after research online found that the vehicle harness behind the radio doesn't have a key on power source so you have to run a new ACC line to the red power wire on the back. I used an add a fuse to fuse 32 in the passenger kick panel fuse box that was unused since i don't have power windows or mirrors, literally took 5 mins, this bypassed the can bus that came with it tho. i don't have steering controls on the truck so it doesn't really matter for me but everything works now, unit doesn't tell me what vehicle i have though so i'm sure theres some options i'm not getting now but it does what i wanted it to do, can still connect to wifi hot spot and use all apps and for $140 i cant really complain (2g+64g)
hope this helps
I’m wanting to put this in my 2010 xl and I’m not sure what you did here, I’m confused. I would really like to upgrade my radio as it’s broken and won’t even turn on. You run the new power wire to the fuse panel?
@@patrickhamilton8962 get this thing called an “add a fuse” from autozone to whatever your parts store is near you and put that in fuse 32 in your fuse box on the passenger side (google where fuse 32 is, you’ll find pics of it) then run a wire from that to the red power cable on the back of the head unit. That’s all I did and it’s been months now and it’s still working fine. Fuse 32 is power windows and mirrors which XLs don’t have but it still gets key on power
That was really helpful. Thank you.
Great video
The ifo/setup/reset buttons do you lose those or are they relocated somewhere
Thanks brother. Just bought this too
Any luck with it? Cant get mine to turn on.
@@tjsii4178 you can’t get it to power up? Check to make sure your harness is set up correctly. Then hold the power button, although it should automatically turn on with your vehicle
I can’t get power. Does the antenna need to be hooked up to be grounded?
@@KeithCarter-ku3cino, did you plug up that red box?
@@tjsii4178 same issue did u figure anything out
Can you leave a link for this radio? Please
Do you or anyone else have a link to this exact amazon set up?
Did anyone elses radio reception crap out after the swap. I get like one station
I like mine I just really wish I could see my AC info.
Did you have any problems getting the radio to turn on or off with the ignition?
Man do a video on radio and don’t even tell what it is?
Do the steering wheel controls work?
Mine didn't have the antenna wire. Any advice on what to get?
I’m in need of wiring help with my same system, can you give me a few pointers ?
Did you just use the factory harness without having to splice ? Did you just use the car antenna to screw in the back. ? Thanks
What brand is that radio?
Where did you stick the gps?
Can i connect my android phone and listen to CZcams music. Also the link please
How do I stretch my wire to the hazard and air bag and tracktion control wire from the back of the radio to the switch on the Apple android 13.0 my wire is to short
Minute marker 3:06, he explains how
Does this come with apple CarPlay and android auto
I installed this on my truck and it covers up the thing that originally showed the AC controls and now it doesn’t show what temperature each side is on and what the fan mode is
He said this in the video
Can you post the link
What is the issue with the knocking noise after it boots up? I’m having the same problem and I can’t diagnose it.
Climate control door
Yeah, blend door actuator - beware, there are 3 or 4 of them, the one behind the 'radio' is a bitch to get out. I am in the process of doing this upgrade, and that part sucks. The radio documentation really is lacking, I had to watch a couple of videos to figure out a couple of points. Thankfully, I knew about a couple of the issues, as I had a JVC KWV330BT previously - loved it, but I wanted GPS, Android Auto and Apple Carplay in the dash.
Does the factory sync still work with it?
If you have sync yes, my truck doesn't have sync so no need to plug the third cable from the stereo
What ram capacity was this unit? 1gb 2gb 4gb ?
I have no power. I plugged in the Redbox, and still nothing. Idk what to do. I’m about to send it back..
Check your fuse. Under your glove box i think its number 29 20amp. I installed mine and i also had no it was a blown fuse.
Blown fuse on 2013 f 150 after I tried installing it without the box lol, it's fuse 29 on my model, after installing it with the box it works fine, I thought it was for steering wheel controls that's why I didn't installed it at first
Either the fuse blew or the harness you got with it is bad. When I installed mine they missed tons of wires on my harness so I ordered a replacement harness and no issues since and it's been 1 year
sound doesnt work. it only works on radio but when i switch to bluetooth or carplay no sound!! does anybody have an idea?
I got the same problem. No idea how to fix it
Update your can box
@@humbertoarredondo96 how do you do that I have no sound also
I installed everything but the screen does not come on
You probably blow a fuse, check fuse 29 for radio, and double check connections before trying again
You need to connect the red wire directly to the fuse box.
@@OG-dn4fo how do you do this?
Did everything you did no power on head unit. Fuse is good. All harness are hooked up. Have no clue what do.
Try a few trouble shooters online, if not then take it to an audio shop and they’ll get you sorted
Get a tripod. I can't even watch the camera bouncing all over.