How To Program 1998 - 2004 CHEVY S10 Remote Key Fob - DIY Programming Pair Sync Chevrolet S-10 Fob

A DIY video tutorial on how to program or pair a remote key fob to a 1998 - 2004 Chevy S10. You will need an ignition key and all of the key fob remotes you want programmed to the Chevrolet S-10 in order to complete this programming procedure.
To program or pair a remote key fob to your Chevy S10:
1. Close all vehicle doors.
2. Insert the key into the ignition.
3. Hold down the power UNLOCK button on the driver’s door panel-continue to hold down until instructed to release in step 9.
4. Perform steps 5 through 8 in fairly rapid succession.
5. Turn the ignition switch to the ON position (as far as you can go without starting the engine).
6. Turn the ignition switch to the OFF position.
7. Turn the ignition switch to the ON position.
8. Turn the ignition switch to the OFF position.
9. Release the power unlock button on the door panel. The vehicle will lock and unlock the doors automatically.
10. Hold down the LOCK and UNLOCK buttons on the key fob simultaneously until the door locks and unlocks. This step may take up to 30 seconds.
11. Repeat step 10 NOW for each additional key fobs (including any existing transmitters).
12. Turn the ignition switch to the ON position in order to exit the transmitter programming mode.
This programming or pairing procedure applies to the following Chevrolet models:
1998 Chevy S10
1999 Chevy S10
2000 Chevy S10
2001 Chevy S10
2002 Chevy S10
2003 Chevy S10
2004 Chevy S10
DIY keyless entry remote fob and smart key programming instructions available at www.ProgramYourRemote.com/
DIY Ignition key programming procedures available at www.ProgramAutoKeys.com/
Find a Locksmith in your area with www.LocateALocksmith.com