EleksCAM Software Tutorial with Eleks maker Laser Engraver 2500mw 03
Vložit
- čas přidán 7. 05. 2017
- A3 Pro 2500mW 300 x 380mm Desktop Laser Engraver
Buy A3 2500mW Laser Here: www.gearbest.com/3d-printers-3...
Buy A3 5500mW Laser Here: www.gearbest.com/3d-printers-3...
Buy A5 2500mW Laser Here: www.gearbest.com/3d-printers-3...
Buy A5 5500mW Laser Here: www.gearbest.com/3d-printers-3...
Download the EleksCAM Software Here: download.appinthestore.com.s3.... - Věda a technologie
Thanks for this!! Your video is the only one I've come across so far that shows how to install/use the Eleksmaker software. Everybody always shows the build, then a speeded up clip of how it works, and neglect to show us noobs how the software works. I'm building the Eleksmill, but I guess the software works mostly the same.
Simple and to the point. Thanks
Sure would be nice if folks would talk to explain in depth of their videos
nice video really helped but can you tell me why when i use the text carve why does some off the letters come out in a mirror image ,,,,,,, thanks
Hands down the best video yet on using the Eleksmaker software. One question though, how did you zoom in on the preview screen?
Olá o meu não está movendo nenhum dos motores depois do Start. Manualmente os eixos funcionam, no benbox funciona, somente nesse elekscam que não. Pode me ajudar?
I can't use the outline option for engraving can you help me
how do you scoll in and out from the picture graph mode?
how if the mechine's printing part doesn't move up and down ?
the one that holds the pen..
please help me to solve my problem..thank
Hello very good video, I have a problem with my new laser I have an EleksMaker EleksLaser-A3 Pro 2500mW comes with Eleks mana SE board and the Grbl 0.9i is installed. The software for use is EleksCam 3.1. The engines move well the laser works at first sight all right, when with the same program I put a text, it does it without problems, but when putting a design of the same gallery that incorporates the program if it is not very complicated to reach 20 or 30% stop, stop sending the codes, sometimes turn off the laser and sometimes it stays on burning the material, if it is complicated it does not reach the 5% that already stops, but does not give any kind of error in the console . I have tried to use designs with Linkscape and the laser plugin and the same thing happens, and also if I use the UniversalGcode sender the same thing happens and on the console when the following line appears ok when they appear, these signs are when you stop without turning off the laser. If you have any idea what happens and how to solve it, I would appreciate it. a greeting
Does this software work for the servo motor?
Hello, my teacher, I installed it, no problem in mechanics works. When I run it with BenBox program, it draws, but the laser stays on all the time, the laser does not turn off in transitions, it draws every path it follows. With the EleksMaker program, I can only move the laser.
Which mother board did you use?
Olá bruno. Pode me mandar os arquivos de instalação da ELEKS MAKER...comprei a máquina mas o site de download da empresa não abre de jeito nenhum.
nice! I still use the Benbox software but want to get the Eleks software. Question, how long did it take to burn that image into the wood?
Hello Rancidkidd, it was made in 10 minutes or less
Wow, I need to get the Eleks Software. On benbox that would have taken ~40 minutes. Looks Great!
if you have any trouble, just ask :D the software link is in the description
Bang,, kenapa pada saat proses ukir tp mesinnya jalan di tempat , mohon petunjuk bang .
Если не работают шаговые двигатели после старта - переставить язык и регион на США в настройках windows
Спасибо, помогло.
I can not print, the shafts do not move while printing. It stops with the laser on
I have that same problem..
I had this problem and foundd out the cables were plugged into the wrong port. Do you still have this problem?
Pity they think we all kmow the settings on how to zoom or move the picture around- that's why we're here to learn.
Try to write or show in the video what you mean, it would help new guys a lot..
Cant get the " find serial port failed " to go green ? any ideas ?
You need to install the drivers first, or the machine wont find the port, if it keeps failing, then check your windows configuration in harware and check if there is no problem with the usb drivers
what drivers to install? no software came with it..I downloaded the elekscam from the link above, no luck
sorry bout that, found it however my laswer isn't moving on any of the axis. i'll look around for help
inside the Elekscam there is a button to install the drivers, check the video
It's pretty cheap here - for 195.90 USD
www.banggood.com/2_5W-Desktop-DIY-Violet-Laser-Engraver-Engraving-Machine-Picture-CNC-Printer-Assembling-Kits-p-1001413.html?p=B4200913385416201708
Banggood is a well known online store, so...
czcams.com/video/RMZrn9iZAbg/video.html
What do you do to zoom the image?
if you mean to make the image bigger, you can choose the size of the image in mm or inches
I figured it out. I was trying to use a trakball instead of a mouse with a scrolling wheel.
Hey mates
I was so disappointed 3 min before writing this comment but i figured a way to make the cnc work !!
Can you please help me, i'm trying to speed up the process.. it literally takes ages to burn an image in here
Dead links! :-(
down load = not safe / unable to compete.
The reason people watch these videos is to see the end result so when people just flash the end result really quick or go as far as covering it up with text and a preview of your other videos just to promote yourself it really ticks me off. Especially when i invested 5 minutes of my own time time to watch the first half of your video.
Lose the f... music!