Mobile DJ Rig // Go Wireless with Dani + Soundboks 4 + Death From Below!

Sdílet
Vložit
  • čas přidán 24. 07. 2024
  • In this video, we'll demonstrate how to set up a wireless mobile DJ rig with Dani, Soundboks 4 and Death From Below subwoofers. SKAA wireless is the ultimate way to bring your rig to any gig, anywhere, even in remote locations where you don't have access to power. We also explore some alternative configurations for different applications, how to incorporate headphones, and how to convert your existing wired system into a wireless system. Enjoy!
    SKAA Official Website ➛ skaa.com
    SKAA Store ➛ www.skaastore.com
    SKAA on Instagram ➛ / skaasound
    SKAA on TikTok ➛ / skaasound
    Products featured in this video:
    Dillinger Labs Dani ➛ www.skaastore.com/collections...
    Dillinger Labs Streetheart ➛ www.skaastore.com/collections...
    Dillinger Labs Death From Below ➛ www.skaastore.com/collections...
    Death From Below Manual ➛ dillingerlabs.com/media/1266/...
    Soundboks 4 ➛ www.skaastore.com/pages/sound...
    RCA to TS Cable ➛ www.skaastore.com/products/1-...
    Cassandra Mini Wireless Transmitter ➛ www.skaastore.com/collections...
    SKAA cmd ➛ www.skaastore.com/pages/tlc
    Chapters:
    0:00 Overview
    1:20 What You’ll Need
    3:47 DJ Deck & Computer Setup
    4:19 Dani Transmitter Setup
    6:27 Soundboks Configuration
    8:30 Mono or Stereo?
    10:23 DFB Setup
    11:12 DFB EQ Presets
    12:49 DFB Audio Routing
    13:40 DFB Time Align
    15:14 The Magic of SKAA
    16:15 Factory Reset
    16:35 Range & Battery Life
    17:11 One Dani Setup
    18:07 Add Wireless Headphones
    19:13 Convert Wired System to Wireless
    20:58 Wrap-up
    #skaa
    #mobiledj
    #wirelessaudio
  • Hudba

Komentáře • 21

  • @SKAAsound
    @SKAAsound  Před 3 měsíci +2

    In this video, we'll demonstrate how to set up a wireless mobile DJ rig with Dani, Soundboks 4 and Death From Below subwoofers. SKAA wireless is the ultimate way to bring your rig to any gig, anywhere, even in remote locations where you don't have access to power. We also explore some alternative configurations for different applications, how to incorporate headphones, and how to convert your existing wired system into a wireless system. Enjoy!
    SKAA Official Website ➛ skaa.com
    SKAA Store ➛ www.skaastore.com
    SKAA on Instagram ➛ instagram.com/skaasound/
    SKAA on TikTok ➛ www.tiktok.com/@skaasound
    Products featured in this video:
    Dillinger Labs Dani ➛ www.skaastore.com/collections/skaapro/products/dani
    Dillinger Labs Streetheart ➛ www.skaastore.com/collections/skaapro/products/streetheart
    Dillinger Labs Death From Below ➛ www.skaastore.com/collections/skaapro/products/death-from-below
    Death From Below Manual ➛ dillingerlabs.com/media/1266/death-from-below-owners-manual-040324.pdf
    Soundboks 4 ➛ www.skaastore.com/pages/soundboks
    RCA to TS Cable ➛ www.skaastore.com/products/1-4-trs-to-rca-mono?_pos=2&_sid=e86f9b35a&_ss=r
    Cassandra Mini Wireless Transmitter ➛ www.skaastore.com/collections/skaahomeaudio/products/cassandra
    SKAA cmd ➛ www.skaastore.com/pages/tlc
    Chapters:
    0:00 Overview
    1:20 What You’ll Need
    3:47 DJ Deck & Computer Setup
    4:19 Dani Transmitter Setup
    6:27 Soundboks Configuration
    8:30 Mono or Stereo?
    10:23 DFB Setup
    11:12 DFB EQ Presets
    12:49 DFB Audio Routing
    13:40 DFB Time Align
    15:14 The Magic of SKAA
    16:15 Factory Reset
    16:35 Range & Battery Life
    17:11 One Dani Setup
    18:07 Add Wireless Headphones
    19:13 Convert Wired System to Wireless
    20:58 Wrap-up

  • @bboymac84
    @bboymac84 Před 3 měsíci +1

    This is dope! Let’s get this unit out in the wild💪🏽

  • @PhearNoneGearGadgets
    @PhearNoneGearGadgets Před 3 měsíci

    Nice set up! I just did a review on Onmis Duo and I mention the Skaa transmitter and receiver in it as an alternative.

  • @corysivell5520
    @corysivell5520 Před 3 měsíci +1

    Are you going to sell a backpack to put the subwoofer? This would be super helpful !

  • @bboymac84
    @bboymac84 Před 3 měsíci +2

    I hope they put the Dani unit in a Dj mixer. This way you just turn on the mixer and it connects to the speaker or receiver automatically. Less set up😁💪🏽 it’s very possible because the pioneer A9 mixer sends Bluetooth!

    • @whittywillshine
      @whittywillshine Před 3 měsíci +1

      Inwould assume that Pioneer/ Alpha Theta would use the technology that’s in the wave 8. Great idea for sure though.

    • @bboymac84
      @bboymac84 Před 3 měsíci

      @@whittywillshine let’s see who does it 1st

  • @WAVMOB
    @WAVMOB Před 3 měsíci

    Looking forward to my DFB Subs, what advantages does the SoundBoks Gen 4 have over the Gen 3 when it comes to using it with the DFB subs. The Gen 3 is sinificantly discounted and I am torn between these options

  • @doflamingo85
    @doflamingo85 Před 7 dny

    hello nice video! why not alpha teta portable speaker?

  • @JoeyJumpUp1981
    @JoeyJumpUp1981 Před 6 dny

    Ok I thought if I used an XLR cable I could plug my Sounboks 4 XLR Channel 1 into a 15" Rockville subwoofer XLR Left output. It's not working, any ideas?

  • @nodrumsorbass
    @nodrumsorbass Před 17 dny

    Do you have to use the Skaa transmitters? I see you can xlr to each soundboks, but can you then link the sub to the sb4?

  • @mattc487
    @mattc487 Před 25 dny

    @SKAAsound dumb question: why wouldn't I just use a single transmitter and route the through directly into the soundbok? would that create like an offset in latency between speak and sub?

    • @SKAAsound
      @SKAAsound  Před 21 dnem

      You could do that do if you wanted to, you'd just be requiring 2 extra cable runs. For a fully wireless setup you could daisy chain two Danis with the Thrus, but by all means if you're trying to save some money on Transmitters, you could totally take the Thrus straight to the soundboks with a cable, and then use 1 Dani in SKAA Pro mode for the DFBs. Just make sure you have the inputs set to 'line input' on the Soundboks App for each Soundboks Speaker. My suggestion if you use it that way is to set the time delay setting on your DFBs to the "zero" mode (No LED). This adds no latency; whereas modes 4 and 5 are recommended for using SB4 wirelessly. The Zero LED setting is the default setting anyway.

  • @DjHatRick201
    @DjHatRick201 Před 3 měsíci +1

    I have two soundboks 4 and want 1 dfb. Do I need a dani transmitter? I use the soundboks with xlr , out of my dj controller. Can I connect the dfb to the soundboks 4 without a dani? And ps. Will you make a video where you can test the sound ? 😉 I would love to know how much bass it adds

    • @bboymac84
      @bboymac84 Před 3 měsíci

      Yea you can connect straight wired in but it defeats the purpose of a wireless system 🤷🏾‍♂️

    • @SKAAsound
      @SKAAsound  Před 3 měsíci +3

      Yes there is a way to do that with Clusters. You make one of the Sounboks a SKAA "Hub" and then the hub can send wireless audio over to the DFB "satellite". Although, the DFB itself does not have any analog audio inputs, so no way to plugin XLR or TRS directly to the DFB. I'll be making a new updated video on clusters very soon!

    • @bboymac84
      @bboymac84 Před 3 měsíci +1

      @@SKAAsound can you do a studio set up video?

    • @corysivell5520
      @corysivell5520 Před 3 měsíci +2

      Would love to see this!

    • @tspinning
      @tspinning Před měsícem

      @@SKAAsound this is good to know, but it would be very slick to have XLR in on the DFB. Wireless isn't my main goal, battery powered/mobile is my #1 desire w/ ultra low latency (XLR)

  • @AllenGifford
    @AllenGifford Před 3 měsíci

    Dj system wireless speaker is great.

  • @AllenGifford
    @AllenGifford Před 3 měsíci

    BEST DJ SYSTEM (SOUNDBOK 4 AND DILLINGER SUB AND DENON PRIME GO)