It's not necessary to take off the thermostat housing to swap out the water pump unless you're also going to put in a new thermostat. And if you're going to swap put the thermostat, replace the plastic housing with an aluminum one. Don't put the plastic POS back on it!
How do i get Airlock out? I have seen Videos lifting Cars up and squeezing Hoses with Bleed Screw out, but no luck, still no temperature on Gauge that worked, before I started job. Should Arrow on Thermostat go Up? Awesome video, thank you.
Drive the piss outta it, like 5k rpm’s park on hill open cap, squeeze the upper and lower hoses top off do again and again and again till it it’s good to go
It's not necessary to take off the thermostat housing to swap out the water pump unless you're also going to put in a new thermostat. And if you're going to swap put the thermostat, replace the plastic housing with an aluminum one. Don't put the plastic POS back on it!
Thank you for sharing your experience, it will be very useful information for us and our viewers.
AUTODOC
I like the videos. However, do you have to play this ridiculous music the whole time?
Definitely helpful video with descriptions of needed tools 👍😊👍!!
Hi! Thanks for the comment, share our video with your friends.
THANKS
mine is e30 m42 (e36 m42 engine with serpentine belt). there is a fan mounted on engine. is it necessary to remove the fan first?
Yes
Beautiful car engine
At 6:18 it should be loctite or threadlocker not sealant.
Lol that's what I'm saying. It's got the oring for a reason
Do you have to empty the radiator of fluid or can you do it while it's still full? Not sure if it would make a mess
Yes, is it necessary to drain the liquid from the radiator.
Great video thank you
Kind wish someone spoke at least…
Didnt show the fan being removed and took required to remove it
Thanks man very useful video thanks
Thanks for your positive comment! Stay with us!
On that sealer used around the water pump, will permatex water pump gasket maker work or do I need something different?
Yes, you can use Permatex.
Really nice edit guys
Thanks bro
Wow, this video amazing
Thank you for sharing your opinion with us.
I like this video 👍
Thank you so much
Thank you for sharing your opinion!
wow love this
nice work
Great video 👍
How do i get Airlock out?
I have seen Videos lifting Cars up and squeezing Hoses with Bleed Screw out, but no luck, still no temperature on Gauge that worked, before I started job.
Should Arrow on Thermostat go Up?
Awesome video, thank you.
Drive the piss outta it, like 5k rpm’s park on hill open cap, squeeze the upper and lower hoses top off do again and again and again till it it’s good to go
Thanks for your feedback! You can find this information in the technical documentation for car repairs.
Thanks for your feedback! You can find this information in the technical documentation for car repairs.
What did you do to your clutch fan lol
The pulley torque spec is definitely not 17NM. I broke two of em
lmao it's 8 ft-lbs
😂
it's not so easy ....