Nitrogen Charging - NPK Hydraulic Hammer Service Instructional
Vložit
- čas přidán 27. 08. 2024
- This service instructional covers the basics of maintaining a safe nitrogen charge in your NPK hammer by demonstrating steps for both charging and discharging your hammer. For more information about NPK hydraulic hammers or any other NPK product, visit our website at www.npkce.com.
Though I didn't understand properly how to release nitrogen gas completely for storing longtime breaker but it's good video to have a overview of the procedure. Thanks.
Glad to hear that you found the overview helpful. If you need additional info regarding releasing nitrogen gas, please feel free to reach out to our service department at any time.
service@npkce.com
440-232-7900
I have qoistion .ihave breaker stones (sandvik br3890city) i need to now how mutch présure of gas Can add i have no catalogue no notice pleiz advice me
thank you
What is the link for the charging system
Question... after 30min working why the Hammer gets hot to a point that stops working?
Hello Cesar, apologies for the delayed response. Please reach out to Carlos in our service department. He speaks Spanish as well. His email address is carlos@npkce.com.
if operating a gh15 approx 8-9 hours a day what would you consider to be fair amount of grease being used by auto greaser g025?
I will check with our service department and get back with you shortly.
Depending on actual duty cycle of the hammer, you should use a tube about every 4 hours. So in this case, you should be consuming approximately 2 tubes of grease per day.
The most important thing is to observe a constant flow of grease down the hammer tool. If the tool is shiny, like metal to metal contact, then something needs adjusted on the greaser for additional output. Here is a link where you can find the hammer mounted autolube manual: www.npkce.com/publications/autolube-publications/. Reference page 51 for adjusting the throttle on the greaser to adjust the output of grease.
NPK Construction Equipment Inc ok I thank you for your immediate response! I did some trouble shooting and found that the greaser unit is malfunctioning. thanks
If you have issues in the future with your greaser or any other NPK product, you can contact our service department directly on our website www.npkce.com, by emailing service@npkce.com, or calling toll free 800-232-8280 and asking to speak with someone in service. We would be happy to help get any issues straightened out!
NPK Construction
Equipment Inc
ياريت اصيفو الترجمه
نوع سوسان كوري قياس/60/
Hindi me batay
اصعب شيء بالسعوديه مافي عندنا احد. يعرف له صحيح الا قليل
ياريت اصيفو الترجمه
ياريت اصيفو الترجمه