2 PVC Projects for fishing (thats awesome)
Vložit
- čas přidán 22. 08. 2024
- PVC is the material of to days DIYs again , 2 awesome projects that any fisherman can build easily.
both projects were made from 1 1/2 " PVC , but you can adjust the materials and measurements as needed
here is a Link to the T bolts I used in my track system for the first project
MISSION AUTOMOTIVE 5-Pack of T-Slot Nuts - Ideal T Slot Nut for Toyota Tunda & Toyota Tacoma Pick-Up Truck Bed Deck Rails - Cleat/Cleats www.amazon.com...
as always I thank each and every person for watching and if you have questions leave em kn the comment section and I'll do my best to answer em
For Fishin N Stuff gear please visit link.below
if your looking for something not listed , leave a message
www.etsy.com/s...
Howdy. Made the PVC Rod Holder. Made it for 9 rods. Painted it OD Green. It is great! That PVC cement is tough to work with! Dries fast, so you must move quickly. Only hard part was I don't have good tools to get good straight cuts. But it worked out fine. Thanks from Guntersville, AL
That's great man . I agree with you that rod rack is really cool . I'd love to see a picture of it . My Email is in the about section at the top of the page If you get time . Ol and check out some pvc cutters they don't cost much and they work really good on PVC pipe
I am learning how to use youtube. I don't see the "about section"? But can send you pictures.
@@FishinNStuff Think I found the process to email you. Let me know if you get it.
It's keiff32@hotmail.com you have to go to my main page by clicking on the little round logo , when there at the top it says home ,,,,,, videos ,,,,,,,,, playlist ect . If you swipe it to the left the last one says about , click on it
Nice project. Flaring the end of the tubes with heat gun and a bottle will help protect the grip from damage. Great projects, well explained with options.
You could do that , or you could plastidip the ens like I did on the other rack
Couple of great Rod Projects....The Black out really makes the holders Pop!!
Thank you Wes . I appreciate it brother
Love the fact you drive a taco. Thanks
I've owned 3 . They are good trucks , you got to love em
This is a great idea for the back of your truck
Keeps them from going all over the place
Thank you brother
Between Harbor Frieght and Home Depot. My Garage is looking better each month. Thanks Brother. Hoping to see you at The Catfish Conference In February
I'm thinking I'll be there buddy . You got to love abby place that sells tools , if your a tool guy lol . It's like a toy store for grown ppl lol
You my good sir are the pvc king. 👑
Thank you Justin. PVC king haha
The rebar suspense "we will show you that later" is hyping me. This man is a mad genius!!!!
Thank you Sir
And i love the diy fish light too
Hour one so far so goodLooks sturdy for all my rod/reel combos
Brother, you're a fish'n engineer!😎
Both of those rod racks are PURE AWESOMENESS my friend!!! Keep'm comin Keith!!! 👍👍☆Jay
Thank you brother , I appreciate you commenting and building up my self confidence buddy
Rock on! Sitting here sippin on some stuff, trying to game out how I’m going to make exactly what’s in this vid. Thanks!
By far the best diy dude! @Fishin N Stuff
Thank you brother I appreciate it , and thanks for taking your time to leave such an awesome comment
Love the rod holders, especially the second one. That's a slice of fried gold right there!
Thank you brother lol I appreciate that , they both worked pretty dang good
Right on man, cool way to keep your fishing poles from getting all tangled up. 🤙🇺🇸. Tacoma 👍
Thank you brother, ol and my Tacoma was made in the USA lol just saying lol
Don't know how you do it but you do brother. I can never decide on what project to start if i wanted to. Your DIY are so explanatory n easy to follow. Thanks For Sharing such information for us anglers 👊💪🎣😎
Thank you brother, your comments keep me motivated
Great idea. You could add additional pipe to make tackle and cooler holders. Use pipe as a grid system. That’s how I held pots still underway in the Coast Guard. Of course my grid was aluminum bars. Thanks for the great videos and I see the fumes of painting have caused any nerve damage 😂
Haha nope no nerve damage lol . I was always crazy lol . Thank you brother I appreciate you watching em . And yes Sir that's a great idea about the grid system . How long was you in the Coast guard?
Fishin N Stuff
I served for 25 years. I was lucky enough to catch many different fish during my career. I’ve caught halibut to mahi-mahi. Now that I’m retired I’m getting back into fresh water in North Carolina. Your videos are fantastic inspiration and explained well enough for a coaster cook to complete.
Awesome build
Great builds. Thoroughly enjoyable to watch.
Thank you brother
Thanks for the tips.
Thank you
FINALLY you used a satin or matte finish- I know ya did it to match with the bed liner, but it always looks better than the semi, or full-gloss. Just my opinion, but it is mor contemporary- modern I guess
Yeah that's an older video . I try all kinds of stuff lol . One of the best finishes in my opinion is a bedliner spray it's flat and I like the texture . I used it on the rod rack video I did
I just happened to run across your page while watching random videos and i watched one of your videos. For whatever reason i didn't subscribe at that time and it was a couple of weeks before i found and watched another of.your videos. This time i subscribed and now i am going back and trying to see them all. I just wanted you to know i am impressed with your projects and the simplicity of them, you seem to make them look like that anyway. When you finish something it always looks really nice. Keep making your videos and i'll watch them while trying to catch up on your older ones, They're new to me.
Thank you brother . That's the part I work hardest on is making things easier . Sometimes it's just easier to weld something but everyone can weld . You know what I mean
Man I’ve caught many Big Sturgeon’s and Stripers on those Garcia Big Game reels, they are great.
You are truly genius ,awesome job
Thank you brother
On the rack in the bed for us without a track system, you can put every other rod holder at a steeper angle. That will give you more room between reels.
Love it! PVC was made for DIYs!
It sure is handy lol
Radar Love at 4:34. Dude I love the way you arrange your diy videos!
Thank you brother , I appreciate that man
awesomeTimes two
I love this idea. I would suggest rounding off and sanding the inside of the pvc at the opening. It’ll help prevent cutting into the foam on the handle.
That's a good idea you can hear it and use a bottle to do it
another nice DIY video. Love the truck rack.
Thank you brother
Your a talented man. Another great build. Loved it. Makes me want to start drilling LOL.
Thank you Mr Donnelly
Excellent projects! I think I'd want the ability to pivot project #1 from the angled position to a straight up and down position, so I'd have to find a way to put some type of locking pin in the system to lock it in either direction One project #2, to add weight to the stand, I think I'd just fill the rear most piece of PVC with as much quickcrete that it'd hold. Awesome projects... Thanks for sharing!!!
Great DIY, think I will try your idea and I will need to add another row to get 12 rod holders
Awesome. I don’t really have a place that I can back my truck up to and fish out of but, I think I can make a couple of small adjustments and use one to store and transport my rod and reels in the back of my truck. Thanks for the ideas.
That second one you could even take out and set it on the river bank or lake bank.
I never thought of that but your right . That's a good idea
Definitely give me some ideas for my truck!!!
Great video brother
Thank you brother
Nice work! Just need some drain holes so water can get out if it rains.
Dang it lol your right lol , how did that slip my mind lol , good catch brother
@@FishinNStuff lol I'm the same way.
Me too haha
Fishin Stuff doesn’t fish in the rain. Just Kidding. Great Catch
Lol CZcams keeps me so busy I don't fish much any more lol . I'm working on getting ahead though lol
You had me at PVC, but "rebar"? No WAY I could stop watching at that point. Love your channel, keep up the great work. I really liked the second build, because it seems like those compartments you created with the extra PVC will work great to keep stuff from sliding around.
Thank you brother , I appreciate you watching and taking the time to leave a comment, both Racks turned out pretty cool man
Awesome thanks for sharing
That was awesome!
Thank you Sir
Just frkn awesome.
Thank you brother I appreciate that
Great video keep them coming.
Thank you brother
That's awesome I'm going to have to build one for my truck. You'll be seeing it in my videos for sure.
Great video
You should use a plastic prep spray before you paint . Your paint will last forever and never chip . BASF makes it and so do others . I like BASF .
Love your videos man ! ! & !
Thank you brother
That's awesome ideas right there!!!! Since I work in a hardware store, you've given me some ideas on how to safely transport my rods!!!!
Thanks, brother!!!
Thank you brother , you need a safe way to transport em . You coming back down here next year for the tournament aren't you ?
I'm not sure yet... Depends on if I can get my boat completed before then. I've had to quit fishing recently so I can finish it up!!😅
I let time pass me by and now I'm scrambling trying to get it ready!!!
I think the tournament is moved back till april this year
April 18th is the date.
That spray paint is the only kind I’ll buy. Not only is it cheap it lasts long outside.
I agree
I built a rod holder for my JEEP Wagoneer and after several seasons it started to fail on me. I used "U" clamps ( conduit holders) on a piece of 1"X 12" board cut the length of my JEEP's front bumper. My problem was screws becoming weak and failing in securing the tubes to the board. My ends were left open to drain the tubes. I used rubber straps to secure the rods to the boards. All told it looked like Franken-rod holder!. What you suggest to make that would hold together better, look good. The spare tire on a Wrangler gets into the way ( for me). Love yer builds young man! Keep 'em going!
Thank you Sir . I appreciate it I've been thinking about making a rod holder for a reese hitch reciever , but everyone doesn't have em , Email me a picture of what yours kind of looked like if you have one keiff32@hotmail.com maybe it'll give me an idea
Awesome I’m doing it . Thx man
THANK YOU GREAT IDEA
Have a safe and prosperous New Year
Another great video, brother. I love PVC lol, getting ready to make your submersible light
Thank you brother
Great DIY! A helpful idea to add that requires DRILLING! Yes, I said drilling....lol. Put a weep hole at the backside of each rodholder. Don't know where you live, but it rains a lot here in Southeast Virginia! The weep hole is self explanatory.
I agree with you
Sweet I made a similar rod holder for my truck but I might make a few changes to it now that I seen this 👍👍🎣
Thank you brother I appreciate it and thanks for taking the time to leave a comment I appreciate that too
I'm so into PVC projects! Awesome video man! If I still had a truck. I'd do that for sure. 🤘😎🤘
Thank you brother lol Gerry you a truck lol jk
But wait! you need to build one more for the guys that have toolbox in the bed. I used plywood to bolt PVC to and metal hangers to drop over inside of toolbox lid. That way the rod holder is more safe. Also some may want to use self tapping bolts instead of glue on the T"s in case you
change your mind on the angle the rod tips are setting. Cat rods and pan fish rods have a different backbone to them.
Love the how to videos getting a bunch of ideas keepem coming!
That's a good idea , about changing angles
Beautiful video
What do you think of these czcams.com/video/XTbMqb54V4Y/video.html
Very nice - nice job!!
Thank you Sir
Great stuff. Really like your channel.
Thank you Sir , I appreciate you watching brother
Good job thnks
You can vary the length of the rod tubes if you want to add a couple more. This can set the reels at different heights providing more space to fit them closer together. Take into account the varying lengths of your rod handles as well.
That's a great idea man , that would work great
Good idea. I was about to start the project and knew I was missing something.
Nice as long as there's no low tree branches on the way to the lake and you're definitely not stopping at McDonald's.
You can stop at McDonald's, their stuff is 9 foot and I leaned em back so they ate only about 8 ' . But really you control how tall it is . I normally keep my rods in my boat standing up and they are way too tall but I swing out at the drive through and its fine , I appreciate you watching brother
Great projects brother keep them coming
Thank you Sir
You could drill a few holes across the bottom so they don't fill up with rain.
Hey I thought about that after the video lol . Bit your exactly right
Impressive
Thanks for the ideas going to try the one in the bed because I have a tonneau cover that don’t want to remove every time
Good idea
Good stuuuffff ty
Cool ideas. They look good bud
Thank you brother , I appreciate it man
Fishin N Stuff you’re very welcome brother! Keep up with the good ideas. God Bless
Nice job
Thank you Sir
Really like the second rack because its easily removable ! Did you drill drain holes on the bottom side to drain out any rain water that might get into the rack through the open top vertical pieces of tubing ? Another great PVC DIY Build. Keep them coming !
No sir I forgot too lol , but that's a good idea . I would drill the holes on the bottoms of the T joints . The joints are the lowest points on the inside . I actually thought about putting sand in it for weight but I wouldn't it would be hard to get in and out of the truck
Glad I’m reading through the comments here. Just got another good idea. Thanks man!!
Would be cool to have a rod holder in the bed, without a track system taht could be adjustable to slide it from the front to the back, for bank fishing. Even if you had to attatch it to the bed somehow to keep it from coming up.
I really wanna see a pick of it outside and loaded up!
I made it for a friend who took it to the beach and put it on his boat . I asked him to take some video or pictures for me when he gos fishing again but I'm not sure when that will be . But I already know itll work its easy to sold not too . Id really wanted to make it bullet proof you could make the bottom base out of 1/4" instead of 3/16 , you could even make it all 3/8 like the top is but I think that would be over kill since the very top of the line reels only have 25lbs of drag and no body runs their drag maxed out . Ppl act like the fish they catch pulls harder than other ppls when really the drag on the reels are the determining factor of how strong a Rodholder has ti be
Great stuff brother. Keep it up
Awesome video thank you so much. I built a rod holder similar to the second one in this video years ago but with my short bed Tacoma it just ate up a lot of bed space so this time I went with the first style build in this video and it’s absolutely perfect. You made it super easy to follow and just copy. When I built the other one years ago I couldn’t find a decent video and just saw pictures so I wasted a lot of time and pvc just trying to figure it out but this time it was a breeze. Thanks again and keep up the awesome videos!
Thank you Sir , if you know someone that welds I've got a steel truck rodrack video that's really cool and it's pretty cheap to make
Also, I apologize if you mentioned this in the video but the T-bolts for the track system, what size bolts are needed for mounting the metal to the T-bolts? I think on Amazon it said 3/8 inch but before I drilled those holes to mount to the truck I just wanted to make sure. Thanks again. I’ve had a lot of friends wanting to do the same build and I sent them all your video.
@@FishinNStuff can we get that metal fishing rod video??? Thanks man!
Good idea man. New sub here
Was about to spend 500.00 at Boat outfiiters,,but now after watching this,,,I'll pass,,thanks for a great DIY video man,,Tight lines brother!.
Thank you brother I appreciate it
You should drill some small holes on the bottom of the main pipe to let water can drain out if any get in the tub
Your right
If you heat pvc in the oven or toaster oven for a few minutes it becomes playable you can move it and stretch it however you'd like or even to close the ends don't get it to hot it will melt or catch fire
Cool deal! I wish we could drive on the beach to fish here in SC. As far as I know, there is no place here that it is allowed.
I know you can in Daytona beach , but I don't know any where in north or South Carolina you can
Both those build looked great. So now you have rod holders for garage, your truck, and your boat. Do you have a rod holder to carry all those rods to a bank or a pier or would you use the beach cart you built? Went fishing with Dieter Melhorn last August and we had fun talking about your CZcams Channel. He said you lived nearby. Would have been a kick to meet you. Anyway, keep up the good work. Love some of the stuff you build.
Thank you very much , it would have been great meeting you . Ol Dieter, he's a hoot lol
I have an idea for you to try to do, make a crab pot using a jumbo plastic rectangle laundry basket around 19 W x 12 H x 28 L with a flower pot with the bottom cut off that is 8 R x 6.5 H that you screw onto the bottom or cable tie the laundry basket that you've put a 8 inch round hole in on one end of the basket. For the base which is normally the top part of the laundry basket you use 2 or 3x 5/8 x 30 L painted reinforcing bar for weights, 2x pieces of 2 x 4 x 20 L hardwood with 3 holes partly drilled in which reinforcing bar goes into, plastic Safety Barrier Mesh as netting & perforated metal strapping on a roll that you screw around the outside of the wood to pull the reinforcing bars tightly into the wood. Make sure that you wind 3/16 rope around reinforcing bar, around plastic safety barrier mesh & around the basket so that no crabs can escape. Mount a mesh bag to the other end inside the pot for the bait & mount your rope to the wood for retrieval.
That sounds like it would work good
You can possibly make up one or 2, try them out & see what they are like
I don't live near the salt water , that's the only problem
You could modify for creek fishing just use your imagination.
Do you ever flare the ends of your rod tubes. Use a heat gun and a glass bottle. Push the bottle into the opening when it’s soft and it will flare the ends .
If you really want to cut down the spending on materials for those crab pots, then you can do without the perforated strap & reinforcing bars & just use recycled pallet wood & weigh each corner of the crab pot down with small plastic milk bottles that have handles on the bottles & fill it with sand as you tie the handles around the base of the crab pot.
well done....wondered if somehow there was an internal circle cap to seal the 10" at the T section then you could have water filled the entire tube frame maybe, just a thought. but love it, keep them coming
You cab do water I thought about that , but the water splashing around will keep your roof handles wet lol .I thought about sand too . But its heavier than I thought it would be
I'm sorry you did say to seal it off . I missed that I had just woke up lol . Yeah I say that would work man
One thing when working and gluing PVC,don't just glue them.Buy some PVC cleaner and use it,take all stickers off where glue is going to be,clean the PVC well (both pieces) then use your glue.Using glue alone doesn't allow it to adhere to the PVC as well and it will work/break lose over time.
You right man it does make it stronger .
Hell yeah bro
I would drill holes in the bottom here and there to let the water out if it rains so water doesn't get stuck in your tubes
Your exactly right , I should have included that but forgot
I’d like to see you build a rod holder or some type for an F150 Ford pick up crew cab with a tunnel cover on the back of it I have a Tono cover on the back it is unremovable Thank you
Love it. But may I add my 2 cent. Lol. Now I'm not there I don't no but I have made them. Here in Louisiana we got bumpy roads. So me on the first one ide make one airport right in the middle of the pipe to hold it up so it don't bounce and go down or lean forward just Incase. I no them rod and reels got weight to them. I made the same set up but with 7 rod holders on the back of my wheel chair or 6 rods and one umbrella. I got to have due to lupas blisters me. But as I said I'm not there it may be good and tight. Just bumpy roads do weird things. My truck had ladder rack which I added sheet thick plywood on top to help hold my boat ok. And also I built rod rack like that but my rods went streight back. Help like 10 or so rods my small and big. Even held my net from falling out. But weight was issue. So I took a rope and went from one side to the other 2 times when I pulled tight it pulled the rods up. Which also if you wanted to steal you had to take knots and alot rope out. Or cut it. Lol. But I miss that. Now I got SUV so there hanging from the sealing. Hey works. I want to make a rod rack on top. But want it to flip out and back on but haven't got that done yet been to sick. But love your way alot. The second perfect set up the steal inside good idea. But I was thinking. Ok you got alot rods there one breaks got another. But you could keep 2 rods in the pipe. Say your out. See some kids fishing got broken rods or reels. Not many giveaway few hundred dollar rod and reel. Well been giving for years but. Haven't gave one I've hundred yet. But add few rods in he pipe. Keep few reels open face or push button. Your out fishing you see a kid who meds a blessing. You talk to him how family. Find out they don't have much but there kids loves to fish and is useing gramps's old rod and reel. Kids don't are there fishing. You go pull a rod out and reel ask the parent do you mind. Ide. Love to help him or her fish more. Then say here want to try this one. Kids gonna o yea. They fish a while. Then the kid says here thanks. No you keep I got plenty. Just do me fav. Fish have fun and smile. Then you both fill blessed. Man I miss going out fishing and helping the kids fish I really need my health better. But hey I loved your vidoe awsome as always. I hope my spelling ain't to bad busted my phone it's bad having hard time seeing thru the cracks. So not typing to fast lol. But you have fun till the next great idea and vidoe god bless.
Thank you brother , I appreciate you always leaving awesome comments . I love giving kids stuff too . You be blessed and take care of your health like you said brother
@@FishinNStuff yea it's awesome helping them love the smiles. Wish I could do it alot more. And love your vidoes it's about fishing they help use learn something new. As for me I'm gonna I really want to to be around longer and maybe will help my pain go down some cause as of now just to much. But first got to get warm again not got but warmer. Then start selling loose some weight while trying to find a truck and camper then surgery. But think I'll have to have my stomach done first really. Little scared but I don't eat much can't loose so maybe get part cut out or the band I'll deff eat less but that way I'll loose just don't want to loose fast don't want surgery for loose skin that scares me. But I will of I'm not 20 to 45 less by spring I'm having surgery. But thanks sir. You have a great week.
Can't go wrong with 10"
Hey buddy great vids, I'm enjoying your pvc builds but how about different colour paint like your logo colour instead of crap black. Just my opinion it would like more awesome.
I might do that 🤔
I have a fish and ski. The only space long enough for rod storage is the floor ski area which will get wet along bottom. Have you ever created a DIY rod storage system to fit in this area?
No I haven't but the next video I'm working on is going to be a rod storage for a boat , im editing one right now . The one im getting ready to start on mine help you hopefully
That's cool and all, but I don't have a truck. Can you make one of them things for a lawn mower?😂😜👍💯
That's a great idea hahaha 😂🤣
Love the one you made for your TACO........I also drive a TACO...... Have you had any issues with water filling the rack up???? Did you add a drain hole somewhere??
Yes Sir you do need to drill a couple hole underneath . Didn't think about it making the video . But I dont leave mine in my truck all the time . I've got another rack video . Where I made one out of steel. No.drains needed
I like them especially the second one since i don`t have a track in my truck . But should i put holes in the pipe for rain water drain .
Your right drain holes was something I over looked
NICE ROD RACKS !!! DO YOU MAKE A ROD RACK THAT WILL KEEP YOUR RODS SECURE. FROM BEING STOLEN. I LIVE IN TEXAS AND WE CAN ONLY USE 2 RODS AT A TIME , SO IF WE LEAVE SOME RODS IN THE TRUCK THEY HAVE A CHANCE OF BEING STOLEN.
Im going toi work on that , I've had a lot of ppl ask the same thing
Another Great Video brother, do you have any ideas on how to transport those bank rod holders you made in the truck so they wont slide around and beat your rods or bed up. Keep the DIY projects coming
I'll think about it man , that second pvc rod holder would work because of the compartment in it . Plus it holds your rods up safely
This is really cool! Did you ever make one for a car? Been trying to think of ways to keep my rods in my car so I don’t have to worry about my kids getting to them or them being in the way.
Not yet
My rod and reels are about 10 pounds each and
the rack failed at an angle. I did it over straight up and it works fine now.
Man those are some heavy rod n reels
really like the design of the first one, not really sure if i trust the fact that only the glue on the endcaps are bearing the weight of the hole essembly on a bump in the road...
If it was to break your rods wouldn't go any where but in your bed
@@FishinNStuff 👍🏻 thats good. i have an idea maybe make sort of a small A frame or little suport (tackle) box under the rods for extra suport? (absolutly not trying to be smartass!) really like your channel and wat you do respect!
Keep up the good work man. Got a sub out of me.
Thank you i appreciate it my friend