Scrap Session Network Switches
Vložit
- čas přidán 1. 04. 2024
- Scrapping network switches including some cisco stuff.
I also buy circuit boards & golds recovery items in Melbourne.
My price list.. www.weeecycle.com.au/board-sort
To contact me by email: weeeben@optusnet.com.au
Keep scrapping & Have fun! - Jak na to + styl
The copper coils in the power supplies, with a ferite core in it, are very easy to scrap. If you slightly hit the side with a hammer, the ferite core crumples and you can easily pull out the copper with pliers without much force. Just like you do with those relays, only in those copper coils there is a lot more copper!
Come on Guys , don't forget your thumb's ups it takes seconds lads & lasses . Ben as learn most scrappers over the years with his shows all around the world. lol its not costing us nothing to thumbs up. it just makes you remember why the internet must stay for all of us to, each service you loose there gone forever. been old this is like pen pals with the bonus of learning in many ways Ben is one of the good ones not charging to watch him lets keep the good ones, the ones that cheer us up on cold days let's loose no more of our friends. take care .
Hello Ben,, always great to listen to the videos while I have a sit down in the garage,, more or less microscrapping.
Pulling goldpins off connectors and laptop batteries.
love these longer video's cannot wait for more
Gotta love the “gold band chip for me” tax that Ben skims off the boards😅
They are high in gold content though!
THANKS FOR THE SHOW MATE its always good to see how your doing stay safe n well
Great watch while sitting at work. Thanks for 5he marathon session.
I was watching a older one of your videos you were giving cardboard 0ver for free. In my town the same company as the scrap metal has another location but they pay by the pound for it. From anyone. The price the last time I checked was the same as steel sheet 8 to 11 cents per pound. We don't usually have very much but all helps. Great stuff thanks for the content
Great scrap video! Like the long ones! Thumbs up! Jim in Phoenix.
Good morning Ben. 👍👍👍❤️❤️❤️😎😎😎
I think those slightly magnetic risers are nickel plated brass. When I snap them off or file them, they are yellow underneath. The nickel is what’s magnetic.
The big box and tiny board is a result of them being rack mounted, have to be a specific size case to fit the rack
Great video Ben , it always amazes me how much ewaste you get , keep up the good work look forward to all your future videos
I enjoy stripping powersupplies for fun. I store the components in jars in case the grandchildren need items for art etc.
Excellent ! Nice one Ben. Hopefully a scrapyard visit soon 👍
Keep them coming fella 😂
Absolutely enjoyable video with outstanding content thank you for sharing this with us six stars brother
Greetings to you, sir. I am from Iraq, Baghdad. I love you and your work very much. My dream is to be near you and work with you at all times. This is my dream. I hope your work is nice and I love it very much. You are a good man and I love you. I hope you fulfill my wish to be with you in your country.❤❤❤❤❤❤
He just wants a visa lol. On the plus side, free accommodation at the inlaws for your Baghdad holidays lol
@@chrisjudd8576 I hope you can invite me and come to your country, my friend. I love communicating with you and I love you very much
I love you more. I love men from Iraq. I want to live with you and be a part of your family. ❤❤
@@WilhelmFreidrich Which country are you from my friend?
Watching you discard so many fans - a thought occurred to me. Find a piece of pipe slightly bigger than most fan motors and put a bit of an edge on it's rim - Place the pipe over the fan and hit it hard with a mallet - all the blades removed at once and you have a scrap motor. No more breaking the fan blades off one at a time. I'm also wondering if you'd benefit from making a case compacter for yourself to flatten all the PC cases down so you can put 3 times as much steel in your van at once and take up a lot less space. You might also benefit from a commercial shredder to break down all your plastic into chips for easy & compact disposal.
good luck with advert action cheers sir
Amazing video Ben Keep it up
cheers mate you seem like in super rush... come on take it easy and enjoy it a bit ... all the best again
There are always more boxen that require disassembly. 😊
Great video! Lots of good info
Awsome👍👍👍👍👍
You should consider checking what generation riser you have in them and sell them for cheap . People look for that stuff .
Hey mate - could I please recommend you lighten your drill? Go for a small 12V variety - will have much less weight and save your hand with the screwdriver. At your volume it's definitely worth it in my opinion. That 18v you currently have, the battery alone would weigh more then the 12V skin with battery.
two drills... lol yeah very usefull now i had twelve I guess
love it
Yayyyyy🎉
hellowdy there sir
@@RafalScrapper hellowdy Rafal 😁
it's been a long time since you made a video in the street please try not to make a video every month❤❤❤
Hey Ben. I recently got a lot of military communication scrap. These circuit boards have a ton of gold in them think. Kinda curious what i should do with them.
Hello All 👋
I noticed you reside in victoria are there any places you can recommend to go to for selling your scrap metal, cpu's ect?
❤❤🇮🇳🇮🇳
1:07:02 i think is
sodimm rimm :D
Good afternoon Do you want more help
you need to be pushing the gold recovery the price of gold is shooting through the roof
actually that ws-c6504-e isnt cheap device, u should really check the price of those items u know before u destroy it.
If he could read..
It was 20 years old! It has residual value only. Notice the 256 meg cards!! Beyond obsolete.
meh... get into recycling reality and then you will see possibility to resale ... good luck and enjoy
cheers scrappers
1 have cpu old 1970@@firesurfer
한국하고 가격 차이가 있네요 분류방법도 조금 틀리고
My buyer doesn't allow us to leave heat sinks on boards. Great video Ben.