Mercedes vito how to Change water Pump and fan belt

Sdílet
Vložit
  • čas přidán 18. 07. 2019
  • Mercedes vito how to Change water Pump and fan belt a little daunting at first but quite an easy job in the end pump link below
    www.ebay.co.uk/itm/MERCEDES-V...
  • Jak na to + styl

Komentáře • 34

  • @michaelm3654
    @michaelm3654 Před 3 lety +3

    So far the only video that actually shows useful info

  • @andrewashmore8000
    @andrewashmore8000 Před 8 měsíci

    "Don't get scared just do it. " the man is right.
    I was afraid to start the job , cos thought it would be difficult, but it really is straightforward.

  • @andrewashmore8000
    @andrewashmore8000 Před 8 měsíci +1

    So just to confirm , I replaced my waterpump a few days ago. The man is right it is easy enough.
    There a relatively small number of bolts to take out. Taking off the lower bumper will probably be the hardest. At the corners are little plastic dowels to take out once they are out a few bolts them bumper off. Take grill off to , that's super easy. Next 4 bolts each per headlight , and there easy out too. Next bit seems scary your gonna open a few bolts on the top cross member , and the bottom , just do it , once done flex out the radiator assemble and then in at the allen screw in the middle of fan. To get this loose can be tricky , find a suitable small diameter screwdriver and tap in behind screws to hold against allen screw. There are 3 different size torx sockets , to get off waterpump. I suggest visiting a breakers yard and look at a engine out , to see first hand which screws to take out.
    Tips. : be careful of upper pipe on radiator, relieve clip on expansion bottle end and let off that pipe. Otherwise risk snapping off. If that happens use chemical metal to fix.
    2. Check orientation of jubilee clip on pipe , as fan belt can rub against it.
    3. When taking bolts out of waterpump , push into piece of cardboard. To remember way to put back.
    4. Probably need replacement plastic grommet pins to secure corner of bumper and wing corner.
    5. Don't worry it's a very doable job. Will need a selection of torx sockets, male and female.
    6. Take a photo before taking off fan belt.

  • @mrsdoubtfire534
    @mrsdoubtfire534 Před rokem +1

    Thank you. Have to do mine on 2012 Vito. I had a good chuckle at the "hibiscus" fan!

  • @aurelio645
    @aurelio645 Před 4 lety +3

    NICE ! good explication of steps. Saved me alot of swearing and frustration

  • @TheOfficialBatteryMan
    @TheOfficialBatteryMan Před 4 lety +4

    Managed mine without removing the headlights and removing the crossmember. Replaced a broken condenser at the same time.
    Keep up the vids

    • @NinjaDaddyTkd
      @NinjaDaddyTkd Před rokem

      How did you manage it without removing the headlights etc?

    • @krystoph4420
      @krystoph4420 Před rokem

      Take the radiator shroud off

  • @tumelofaith3046
    @tumelofaith3046 Před rokem +1

    Thank you very much for this video it helped alot especially when I had to remove the fan from the water pump 😂😂 I won't lie it still took me a hour even though I looked at how you did it

  • @Consume0
    @Consume0 Před 4 lety +3

    Brilliant vid man! We've been told our 2003 Vito (presumably almost exactly similar set up) just has a faulty seal around one part of the pump, been quoted $3000au to fix it due to labour but bloody hell it looks easy enough, might just give it a crack

  • @amberspicer1030
    @amberspicer1030 Před 5 měsíci +1

    Can you come do ours pls, nice holiday in Scotland 😂

  • @davetanman7611
    @davetanman7611 Před 2 lety

    Great video. Need to replace tension pulley so feel more confident after watching your video.

  • @eyelidman09
    @eyelidman09 Před 5 lety +1

    You are a clever mechanic Mr D.🚘🔧

  • @geraldhitchens8130
    @geraldhitchens8130 Před 4 lety +2

    Great vid,cheers mate.

  • @richardpithouse
    @richardpithouse Před 9 měsíci +1

    looks like you can also remove the alternator without removing the front end?

  • @steviesb7480
    @steviesb7480 Před 4 lety +1

    Looks like there might be a leak from the high pressure pump? On my vito the oring on the back of the high pressure pump, was seeping oil. I put on a thicker oring, as factory one is quite skinny. Gave it a good push to get it back it.

  • @elcapitan6605
    @elcapitan6605 Před 6 měsíci

    so the belt is turning also the water pump?

  • @pb6972
    @pb6972 Před 4 lety +1

    Hi Mark... Can you help please.. I need to change the water pump on a 2001 vito 113 automatic petrol.. Do you know much about this type.. I've not bought it yet.. Any advice be good. Many thanks Paul..

  • @gaborvalkai3034
    @gaborvalkai3034 Před 2 lety +2

    Fan belt mm? Thanks.

  • @MrZeljko88
    @MrZeljko88 Před 4 lety +1

    May I ask how much would this cost if the vito was not in parts? The labour?

  • @kendavies2016
    @kendavies2016 Před rokem

    Can you change the belt without reminding front end

  • @news2417
    @news2417 Před 3 lety

    Hi i need advice on a 115 cdi vito . When i start it it turns over for a while before it starts and when it start it dos not go more than 3000 revs . Can anyone give me some advice

    • @ashleybonner4273
      @ashleybonner4273 Před 2 lety

      That is normal it wont let you rev pass 3000 revs with stationary. ( Safety feature)

  • @MBT433
    @MBT433 Před 2 lety +1

    salut quanti KM ha la machina?