I have a 1996 xlt special with 12 inch travel to . I bought it when it was 2 years old a real good sled....after all these years!!! Lov your videos!!!!!!
Sounds awesome nice job and the service on the crankshaft that's pretty much unheard of I'll definitely keep them in mind if I mean when my 650's need crank work 👌💪👍
Can’t recommend Todd and his craftsmanship enough. For anyone wondering, this can WILL fit an Evolved chassis XLT. Like duct tape Mike said: “Keep the Busch cold”, your sticker definitely made its way onto my box, keep ‘em rippin!!
We have a local guy in Parish NY that does my cranks. Great service! They utilize koyo bearings and ive yet to have an issue knock on wood northern crankshaft has been around for years and do wonderful work!
I would think that you'd wanna say everything you were going to say before your crank was in someone else's hand..but that's just me. LOL. On a more serious note, I'd like to say that it's great to hear about somebody makin something new for triples again. Very exciting and I can not wait! It sounds great.
Love the channel I’m a triple loving guy to. But I love all of them. You guys should branch out and get some triple sleds in other brands. Trust me your missing out.
@@toddclyne3493 it really was. I was only able to ride 4 times then my sled broke down so I missed some days. Only had about 3 months of safe ice to fish on and about 1-2 months of safe riding ice
Good day Tod writing all the way from Fredericton New Brunswick Canada. I was wondering why I never see any modes being done on a Polaris 580 Triple. From what I hear it was a much more reliable than the 600.
I really like the sound of that can. I have been watching your videos I love them I love triple I finally got the sled I wanted 95 XLT weather 2001 xcr Motor now I need a can what kind of prices at
Hi Todd, say i just got a 1998 XC600 twin and im rebuilding it and noticed there was no thermostat. Does it need one and if so do you have a part number so i could order one. Thanks Der Guy.
@@toddclyne3493 so its just with the whole triple pipe that the rmps increase? Is it the same if i make my own? Will a strait pipe incease the rpms in an other way than the can?
@todd clyne Hey Todd was looking for a trash can to fit my 1999 xlt touring this baby is a gem 580 original miles. Do you make them for this sled? How much? Do you need to re-jet carbs or any other tuning?
Tell you one thing I see at this point... you pile a hell of a lot on your plate... I mean you are one hard working motor scooter... and I'm sure Mike is just right in there with you... that's pretty cool...
People who hate triples have probably tried to race one with a twin that doesn't put out as much horsepower like my friends o1 MXZ 600 twin when he tries to race my 94 xlt 580 it's a sunflower gets left in the dust unless I stick by it
I have a 1996 xlt special with 12 inch travel to . I bought it when it was 2 years old a real good sled....after all these years!!! Lov your videos!!!!!!
Trash can sounds great. Back in 1995 I bought a brand new 1995 xlt with xtra-12 suspension, great cushy ride.
Just picked one up for 400 and i love it💯
Todd’s service is excellent!! I ordered my trash can on Monday received on Friday . It took 10 mins to install and the sound is HELL Ya !!
Hell yeah brother!!!
Would like to order a trash can if possible Todd ! Thank you
Great Sound!! Nice Bar in your Garage!!
Good place to hang out!! 👍👍👍
Drinkin and thinkin spot
Sounds awesome nice job and the service on the crankshaft that's pretty much unheard of I'll definitely keep them in mind if I mean when my 650's need crank work 👌💪👍
Yep we are very happy with them
Also forgot to say the trash can's look and sound great almost better than triple pipes with stingers
Love the can. I actually dig the sound of that. I love the triple pipes but I will say this sounds great
Thanks man. One sled at a time. Im trying to get a trash can to fit most Polaris triples. This will be some work
Can’t recommend Todd and his craftsmanship enough. For anyone wondering, this can WILL fit an Evolved chassis XLT. Like duct tape Mike said: “Keep the Busch cold”, your sticker definitely made its way onto my box, keep ‘em rippin!!
Thanks for the feedback
@@toddclyne3493I will have my 600 zrt motor back. Then the zrt 800 back
My 97 ultra needs one of those!! Sounds damn good!!
We have a local guy in Parish NY that does my cranks. Great service! They utilize koyo bearings and ive yet to have an issue knock on wood northern crankshaft has been around for years and do wonderful work!
Yes they do
That thing sounds wicked. 👍
I would think that you'd wanna say everything you were going to say before your crank was in someone else's hand..but that's just me. LOL. On a more serious note, I'd like to say that it's great to hear about somebody makin something new for triples again. Very exciting and I can not wait! It sounds great.
Right on!! 😂😂
Awesome Todd! I see one in the future for my 650👍🍻
🍻🍻
Congrats on 6k!
1k new subs in just over a month
@@toddclyne3493 that CZcams algorithm go brrrrrrrt
Excellent product! Highly recommend getting one on your greasy triple
Great to hear!
Nice .sounds great guys..👍.. I was look at a 96 XCR 600. Jest haven’t pulled the trigger on it yet 🍻
Lol get off the wallet before someone else pulls the trigger on it. 🍻🍻
Nice job. There are so many monoblock triples out there that you could have solid business selling cans for those alone.
I sure hope so. 😀
sounds awesome I don't know if anyone seen those flames shoot out at 7:05 but awesome sounds like mine with custom exhaust lol
😂😂
Love the channel I’m a triple loving guy to. But I love all of them. You guys should branch out and get some triple sleds in other brands. Trust me your missing out.
Please make one for a 1999 xlt special!! Sounds great. Awesome work.
That's the plan!
Sounds great. I can't wait to get my hands on one
Put your order in. polaris.trashcan@gmail.com
@@toddclyne3493 how much for a trashcan?
@@thomasbengtsson8272 210 plus shipping. Email me polaris.trashcan@gmail.com
@@toddclyne3493 do you send to sweden?
@@thomasbengtsson8272 yes I have shipped them to Sweden a couple of times now. It's about 75 dollars for shipping.
Can't wait until you officially sell the xlt trash cans. I personally have 3 xlts. Will definitely be buying.
Good to hear that.
Polaris.trashcan@gmail.com
How the hell do i make my xlt start on first crank?
Sounds good Todd
Thanks man
Sounds awesome.
Thanks
I really like your shop
Thanks man
Your going to be a busy guy now that your making the trash cans 👍
I sure hope so. 🍻🍻
Sounds great!!!
Thanks 😊
sounds great guys
Thanks buddy
Polaris is my favorite because of the clutching pipes sound good but it's the clutching that s more important
Yeah I agree
Any plans for a can setup for a 97 XCR 600 3x3? I know there probably isn't a huge demand for them so I understand if it's not in the plans.
lol I have lots of plans
Hay I just bought a 97 deluxe sp xlt triple but I am looking for a can like that how and where can I get 1 please let me know
email me here polaris.trashcan@gmail.com
"duct tape Mike" lmao
I definitely need one for the wife's xlt. Hopefully she won't notice. Lol
How could I go about getting one of those
Todd do u have a link so I can check out ur trash can price I have a Gem ultra SPX tripple pipes n I need a trash can tripple into single can
Sorry I don't make the triple can yet
Awesome. Piece. For. My. 1998. .xlt. nice. Tood
Thanks
Did you need to rejet?
Just got some snow here in Wisconsin but it only lasted a few hours and wasn’t able to ride on. I wish it would’ve stayed
This was a sucky winter
@@toddclyne3493 it really was. I was only able to ride 4 times then my sled broke down so I missed some days. Only had about 3 months of safe ice to fish on and about 1-2 months of safe riding ice
Does anyone know where I could find a can for a 92 650 Indy triple
you guys are hilarious! mike is just like one my buddies we call him otis. I think you know why
🤣🤣🤣
Good day Tod writing all the way from Fredericton New Brunswick Canada. I was wondering why I never see any modes being done on a Polaris 580 Triple. From what I hear it was a much more reliable than the 600.
I just don't do much with the mono block
Don’t blame you I rebuilt the top end last year and it was a pain to get the rings in
I really like the sound of that can. I have been watching your videos I love them I love triple I finally got the sled I wanted 95 XLT weather 2001 xcr Motor now I need a can what kind of prices at
email me at polaris.trashcan@gmail.com
@@toddclyne3493 I love watching your videos
@@larrycarlson6175 thanks
What the price for trach pipe for 680 1997 good sound I live in Sweden
email me here polaris.trashcan@gmail.com
Would you do a trash can for a Polaris Starlite single cylinder?
no I'm not building them for every sled.
Hi Todd, say i just got a 1998 XC600 twin and im rebuilding it and noticed there was no thermostat. Does it need one and if so do you have a part number so i could order one. Thanks Der Guy.
Most people say the old twins never ran a stat.
@@toddclyne3493 Thank you kindly.
i have a xlt 600 1995, do i need to jet it if i change to a can like this? or will the pto bearing wear faster? does it increase RPMS?
No to all of the questions
@@toddclyne3493 so its just with the whole triple pipe that the rmps increase? Is it the same if i make my own? Will a strait pipe incease the rpms in an other way than the can?
MY MERCH STORE:my-store-11480443.creator-spring.com
polaris.trashcan@gmail.com
Hi Todd was wondering if you make a can for a 1999 xlt touring if you do how can I get one?
email me polaris.trashcan@gmail.com
@todd clyne Hey Todd was looking for a trash can to fit my 1999 xlt touring this baby is a gem 580 original miles. Do you make them for this sled? How much? Do you need to re-jet carbs or any other tuning?
Looks and sounds great, triple/triple trash can in the design stage soon?
Not yet but soon
How do you order one? I may want one for my 96 XCR monoblock 600.
polaris.trashcan@gmail.com
Tell you one thing I see at this point... you pile a hell of a lot on your plate... I mean you are one hard working motor scooter... and I'm sure Mike is just right in there with you... that's pretty cool...
I sure do
Damn that sounds fucking awesome ha ha!!!!
😂😂
@@toddclyne3493 indeed
I had to slow down the video, sold i need this pipe after seeing the flame at start up 😄
How much is the XLT trash can and how do I order one
Email me please
polaris.trashcan@gmail.com
Do you ship to Canada ? How can I buy one of these cans it sounds sweet
Yes I do. Email me polaris.trashcan@gmail.com
Todd, how do we get on the list for a 600 trash can?
polaris.trashcan@gmail.com
Are you selling this exhaust still. I’m definitely interested in one.
Email me polaris.trashcan@gmail.com
Hell yeah if you can tig weld get a turbo on one and play with it lol
Where can I get one of these cans?
polaris.trashcan@gmail.com
Just bought a xlt 600 triple how do i get one of those trash cans
Email me polaris.trashcan@gmail.com
Another question for you sir ive also got a 98 indy 500 how hard is it to swap out the 500 and put in the 600 triple in it
Hey Todd ,Where can I order a trash can for my 650 RXL?
My email is in every video polaris.trashcan@gmail.com
Sounds good I sent you an email.
Would you ship to Alaska? Got a 97 XC triple
Yes I will. polaris.trashcan@gmail.com
? How much are these and how do I purchase one 👍 🇺🇸 🏁 😎
200 plus shipping. email me polaris.trashcan@gmail.com
Is there any re jetting involved with it?
no
How can I get my hands on one for a 650?
email me polaris.trashcan@gmail.com
Where can I order one of these
polaris.trashcan@gmail.com
Where can I order one for my ultra
polaris.trashcan@gmail.com
Can I get one for a ultra 680 wedge?
You sure can. email me at polaris.trashcan@gmail.com
where can i get one? i must know
polaris.trashcan@gmail.com
what does extra 12 mean?
The suspension
Where did you get that can at?
I make them. email me polaris.trashcan@gmail.com
Need one for 97 Xc 600
Email polaris.trashcan@gmail.com
Would like to buy one
Email me polaris.trashcan@gmail.com
How can I purchase one of your trash cans.
By email polaris.trashcan@gmail.com
Do you sell these ? Sounds amazing
yepper email me polaris.trashcan@gmail.com
Wow did you see the fireball come out
Lol I know right!!
Will that can work on a 95 xcr and a 97 xc?
Ill find out Sunday. Going to go do a test fit on a 95 xcr
Where you get that trash can?
I make um
Email me polaris.trashcan@gmail.com
Will it it single pipe evolved chassis ?
Yes it will fit
Where can I buy one for a xcr600sp
Email me polaris.trashcan@gmail.com
@@toddclyne3493 Will do, thanks
Where are you guys located I picked up a sks xlt I'll pay u to get running in tip top shape lol looks like you love the tripple tripple
Central mn. Triples all the way
@@toddclyne3493 dam that's alittle ways away lol I may have to get a trash can lol u find the xltz reliable
@@scottstadler8462 I've seen more than one with over 10000 miles on um
@@toddclyne3493 nice this one is in pretty good shape only couple thousand on it and the sks lol
People who hate triples have probably tried to race one with a twin that doesn't put out as much horsepower like my friends o1 MXZ 600 twin when he tries to race my 94 xlt 580 it's a sunflower gets left in the dust unless I stick by it
would ya ship to ontario
yep I do all the time
Hey Todd, just a little advice... if you want my full attention when you talk to the camera.... put that amazing 1994 rxl out of the view ;)
😂😂😂
How much do you charge for one of these
200 plus shipping
How can i get a trash can for my triple
Yepper polaris.trashcan@gmail.com
What is the price Todd
Where did you get the Polaris banner?
Garage sale. 😅
@@toddclyne3493 ohh okay! Thank you 😄
@@toddclyne3493 do you have any interest in selling the red, white, and blue one?
@@diamondwolfie6786 sorry no.
Are these "trash cans" forsale?
Yes email me polaris.trashcan@gmail.com
Where do I get one at?
polaris.trashcan@gmail.com
@@toddclyne3493 thanks
Need one for my 96 xlt
polaris.trashcan@gmail.com
Where is northern crankshaft located
14255 US-59, Thief River Falls, MN 56701
@@toddclyne3493 added them to my “trusted” list of businesses
I want one, how much?.
polaris.trashcan@gmail.com
Hi I'm Adam and I want to be a triple addict.......... It has been 41 seconds since I've heard my last triple and I need more......
lol thanks man
can they fit a 93 xlt?
Yes they will
@@toddclyne3493 how do i order one please
@@hommyy-c5494 email polaris.trashcan@gmail.com
94-97 sounds about right for mufflers
Thanks, I believe that's what I seen somewhere.
@@toddclyne3493 and thats just wedge wont work for the touring models I'm certain
@@primeau2475 I agree
🖖😉🍻
🍻🍻