DIY ladder chair -

This ladder chair will be very useful for your home.
Firstly, this is chair on which you can sit, and if you need a ladder in one click and a couple of movements, you get a stepladder to change a light bulb or get things out of the closet.
here's my own homemade ladder chair !
So far it works a treat.
Hope you enjoy!!!
Subscribe for more....
/ @ardodiy
1.DIY hand saw • Shorts
2.DIY Wooden Sanding Block - With Sandpaper Easy Change Function • DIY Wooden Sanding Blo...
3.one more way to make wooden dowels • Shorts
4.DIY Folding Chair with metal frame • Outdoor decor idea - D...
Timing
00:00 video started
00:02 presentation how it works
00:20 let's get started DIY
00:24 Find All dimensions at the end of the video
00:28 start cutting process
00:39 check that everything is done correctly
00:44 drilling holes and joining parts
01:31 grinding
01:41 arrangement of steps
01:50 corner bevel on steps
02:12 marking places of steps
02:24 making grooves for steps using a milling cutter
02:46 check steps in grooves
02:55 drilling holes and joining all parts with screws
03:10 boards for the back of the chair
03:20 DIY wooden dowel's
03:33 close the holes for the screws use wooden dowels
03:53 DIY putty for wood
04:15 fill the joints using homemade wood putty
04:25 sand down after wood putty drying
04:36 Slightly round sharp corners
04:51 marking places for loops
04:58 notches for hinges using a Dremel
05:09 checking and tightening the loops
05:19 this is a Latches with draw bail
05:33 board for the seat
05:45 marking places and make holes for loops
06:03 tightening the loops
06:11 put the seat in place and fasten with screws
06:20 Functional test
06:30 I use white stain you can use any color you like
06:42 Use Self Adhesive Furniture Pads
07:00 Final result
07:17 enjoy the result
07:41 ladder chair dimensions
07:53 thanks for watching, don't forget to like subscribe and share! Thanks' 🫡👍✅

[@Shift_Engineer]

The best, compared to the others with this same kind of Ladder Chair.

[@ArdoDIY]

Thank you very much for your opinion, I really appreciate it 😊

[@DiyHenryMartin]

Very creative idea sir👌👍

[@ArdoDIY]

Thanks 👍

[@logoRevealVideoHive]

so nice
I saw it over 50 times
could you talk about degrees for cutting side pieces and back pieces?
really need it
if you have full dimensions so appreciate it

[@ArdoDIY]

Hello. I will try to find the dimensions and send you

[@logoRevealVideoHive]

@@ArdoDIY Thanks a lot 🥰🤩

[@ArdoDIY]

@@logoRevealVideoHive hello, here is a link to the photos, I didn’t measure the angles because depending on the thickness of the wooden slats that you will use, they may differ.. + WATCH this video timeline 07:41 there are dimensions. photo link below 👇👇
drive.google.com/drive/folders/1wSoczAvpJWs4ksjzlY3DJGmVHlqeWGEF?usp=drive_link

[@logoRevealVideoHive]

@@ArdoDIY Thanks a lot for your time
I realy enjoyed and try to making it