The grand master Jonas! This is absolute true building and tuning and it amazes again by a new level. Evel loudy sound at the end and you were smiling pure satisfaction what to expect at final! For me your videos at this moment is the best what CZcams can offer. Seriously. I'm really your fan and grateful of all your efforts and that you delight us sharing your videos. Tack ska du ha grand master Jonas.
Man! Before this whole covid situation I started my 9-5 project. Now it's a bit paused, but soon I have to put some upgrades of upgrades because of this video :D. Give us next stuff soon! Greetings from Poland!
Cant wait to see this build on the road 😁 try and get some drive by videos of the exhaust from the outside I bet it sounds amazing.... Wish i had the skills you portray in the work gone into this 95. So far I've thoroughly enjoyed watching the build on this, keep ul the good work 👌👍
To build an exhaust on the floor is a hard task but you did a great job, just a tip for the future with exhaust wrap, if you soak in a bucket of water for an hour or so before wrapping it expands slightly and then as it dries out becomes naturally tighter. 👍🍻👌🇬🇧
Great job as always. I saw you've still got the plastic bosch diverter valve, I guess you'll be replacing it with a billet aluminium one, maptun possibly? I'm curious as to what stage you'll be taking the car, will you be going over 310bhp as won't the pistons need replacing with wossners? Great work and looking forward to seeing it on the road. 👍
Lovely. Seen one of your exhaust builds before, so not surprised this one worked out well. I don’t have the nerve or the welding skills to create one from scratch. Kudos. I stayed single pipe. Does your research show improved flow over the double exit, or is it merely for look?
Thanks Soulfirer, first time i made a complete exhaust and im pretty impressed of myself 😁 The analysis i have seen is on 3,5inch dp with 3inch singel exhaust catback so The twinpipe is more of a bonus and cause it cool 😎
Riktigt nice! Snyggt att du visade att du svetsade fästen på högersidan så man själv kan göra det i framtiden :). Ett förslag, skulle du kunna testa sänka musiken i videon? För jag får sitta o höja videon när du pratar och sänka när spelar musik. Men riktigt nice bygge! :D
I saw one of your earlier builds you welded a 3” v-band to the turbine housing. That seemed like a great idea, because then you don’t have the necked down downpipe to the turbine housing and less restrictions. This build doesn’t look like you’re doing that. Can you let me know why? It seems counter productive to have a 3.5” downpipe, but then connect to the turbo at 2.5”.
Verkligen snyggt jobb Jonas! Jag ser ingen glasflaska. Får du det så snyggt med flusstråd? Jag känner i så fall jag måste prova. Har aldrig svetsat rostfritt men får du det så bra blir man sugen och prova.
Hi! Thank you for the very useful videos. Why did you make downpipe 3.5"? Why not 3"? Does it make sense to downpipe 3.5" if the rest of the pipe is 3"?
The air is hottets closest to the turbo and has the largest volume. To avoid backpressure it makes sense to have a 3,5" downpipe. My friend has made several cfd analysis and also tests on the street 😉
Your an absolute legend! Beautifully built exhaust. I'm seriously impressed how you worked out those bends. Much respect to you as always!
Thank you very much 👍
Your living my dream!! I only wish I had the money and the time to make my Saab as great as yours. Great vid as always my friend
Thanks Matthew 👍
that exhaust sounds amazing
Greatings from Bulgaria. Good job buddy! Waiting for the next video.
Just bought a used TaliaFerro for $200 on ebay! super happy with it, great video!
I cant wait for the next video!!! That exhaust is a really nice build!
Thanks 👍
Super nice sound! Nice job!!
The grand master Jonas! This is absolute true building and tuning and it amazes again by a new level. Evel loudy sound at the end and you were smiling pure satisfaction what to expect at final! For me your videos at this moment is the best what CZcams can offer. Seriously. I'm really your fan and grateful of all your efforts and that you delight us sharing your videos. Tack ska du ha grand master Jonas.
Thank you very much Kari 🙏 really much effort goes in to make these videos, really really glad you like it 👍 🇫🇮
You make it look so easy! Awsome
Klockrent! Blev riktigt bra 👍
Going to be one awesome build Jonas 😎👍🖤can't wait to see her on the road /track.
Thanks Dhoff 🙏
Du är grym Jonas! 🤘
Nice work! 👍🏼
Man! Before this whole covid situation I started my 9-5 project. Now it's a bit paused, but soon I have to put some upgrades of upgrades because of this video :D. Give us next stuff soon! Greetings from Poland!
Awesome 👍 🇵🇱
Great job as usual, Jonas.
Thanks Ari 👍
Love your videos! Due to time and effort plus parts needed I finally got the TD04 15t turbo all bolted up last night on my 9-5 lpt. Next is Injectors!
Thanks Danny 👍
Amazing !!
Great job mate! 😎🙌💖
Thanks Mason 👍
Bra jobbat!!! Hälsningar från Malmö :)
Tack 🙏
Cant wait to see this build on the road 😁 try and get some drive by videos of the exhaust from the outside I bet it sounds amazing.... Wish i had the skills you portray in the work gone into this 95. So far I've thoroughly enjoyed watching the build on this, keep ul the good work 👌👍
Thanks Owen, will definatly try to capture it from all types of Angels 👊
Imponerande arbete! Blev riktigt bra!
Tack!
Fan va snyggt det blev! Gött ljud 🍻
Tack Sebastian 👊
Ditt leende i avslutningen sa de mesta! Snyggt jobbat Jonas!
Tack så mycket 🙏😉
To build an exhaust on the floor is a hard task but you did a great job, just a tip for the future with exhaust wrap, if you soak in a bucket of water for an hour or so before wrapping it expands slightly and then as it dries out becomes naturally tighter. 👍🍻👌🇬🇧
Thanks, but doesnt apply to titanium exhaustwrap i think 🤔
Bra vibrationer 😀 Det blir riktigt spännande att följa motor jobbet framöver och se vad du får ur maskin..Snyggt jobbat Jonas 👍
Tack Conny 👍
Come on!! Give us an update!!!
27:30 Loved the comment from your better half. hehe ^^
Haha that was really good 😁
What did she say?
@@xcharles1 "the whole house was vibrating"
Gorgeous work on this exhaust, i'm just on a Viggen and an Aero Sportcombi rescue at the moment, but can't make my own exhausts :)
Thanks 👍 a viggen is Nice 😉
@@JonasKakarikas lets hope, it'll be Stage 4 when we're done with it saabvsscepticism.co.uk/saabstories/2020/6/25/viggen-rescue-update
Great job as always. I saw you've still got the plastic bosch diverter valve, I guess you'll be replacing it with a billet aluminium one, maptun possibly? I'm curious as to what stage you'll be taking the car, will you be going over 310bhp as won't the pistons need replacing with wossners? Great work and looking forward to seeing it on the road. 👍
Im going for a custom tune and going to install T5 pistons and rods. The goal is around 500bhp
Skal du ha bruk for den dimensjonen på downpipe så snakker vi seriøs effekt. Fint resultat Jonas👌
Då vet jag hur jag ska bygga på min 9-5 Aero:) . Snyggt byggt fräsig kärra ! :D
Tackar! Bara bygga på 👍😉
Very nice done, Jonas. And I hope you have take measurement of the tubes so you can make one to me in 3" later on. :)
Thanks my friend, all handbuilt custom 🙈
Grymt jobbat, blir fan sugen att fixa min nya saab som bara skulle vara en brukis haha
Haha så kan man ju inte ha det 😉
Yes... vibrations through the whole house is very good. Haha
The best 🙏
Lovely. Seen one of your exhaust builds before, so not surprised this one worked out well. I don’t have the nerve or the welding skills to create one from scratch. Kudos. I stayed single pipe. Does your research show improved flow over the double exit, or is it merely for look?
Thanks Soulfirer, first time i made a complete exhaust and im pretty impressed of myself 😁 The analysis i have seen is on 3,5inch dp with 3inch singel exhaust catback so The twinpipe is more of a bonus and cause it cool 😎
Nice but heavy, also its not loud, it could run on a straight pipe easy. I have example video in my channel
Hahaha. ‘My wife came put and told me the house was shaking’
Yeah- that’s what I get.
You are on the right path padawan 😊😉
🙏
Riktigt nice! Snyggt att du visade att du svetsade fästen på högersidan så man själv kan göra det i framtiden :). Ett förslag, skulle du kunna testa sänka musiken i videon? För jag får sitta o höja videon när du pratar och sänka när spelar musik. Men riktigt nice bygge! :D
Visst går det att göra 👍 Tack!
biltema power
Bästa 👍
Är det rostfritt ? Vilken typ av svets har du ? Riktigt bra jobbat följer allt du gör ! 👍👍
Nej aluminiserat stål... Svetsen är gaslös mig från jula 👍
I saw one of your earlier builds you welded a 3” v-band to the turbine housing. That seemed like a great idea, because then you don’t have the necked down downpipe to the turbine housing and less restrictions. This build doesn’t look like you’re doing that. Can you let me know why? It seems counter productive to have a 3.5” downpipe, but then connect to the turbo at 2.5”.
You are correct in your analysis 👍 new turbosetup is comming up, just gotta take one step at The time 😉 stay tuned!
And its 2,5" for like 1,5cm soo i dont think it has a huge impact on The back pressure....
I always really like your builds and your custom work. I am looking forward to seeing the new turbo upgrade.
Verkligen snyggt jobb Jonas!
Jag ser ingen glasflaska. Får du det så snyggt med flusstråd? Jag känner i så fall jag måste prova. Har aldrig svetsat rostfritt men får du det så bra blir man sugen och prova.
Tack! Ja det är Flusstråd men snyggt blir det inte riktigt 😁 rören är inte rostfritt... Men men, det är billigt och håller ihop iaf 👍
Hi! Thank you for the very useful videos. Why did you make downpipe 3.5"? Why not 3"? Does it make sense to downpipe 3.5" if the rest of the pipe is 3"?
The air is hottets closest to the turbo and has the largest volume. To avoid backpressure it makes sense to have a 3,5" downpipe. My friend has made several cfd analysis and also tests on the street 😉
@@JonasKakarikas OK. Thank you.
@@JonasKakarikas I will use the track without a catalyst and resonator, only a silencer at the end. I think 3" is enough everywhere.
23:53 "last couple of farts" 😂
Ska du byta ut cobran o turbon också ?
Kommer en ny turbo setup framöver 😉
gaslös svets? Vad för svets? Har själv en biltema 90A men handtaget har gett upp så ska köpa en gaslös svets igen.
Yes, ca 1500 spänn på Jula.