How do adjust the best Position of Ink Stream

If the print head could eject the ink stream, but it does not aim straight at the recycler, users may
fine-tune the spray chamber, in the direction indicated in the lower left figure. The optimum position
of the ink stream is the left one-third point of inner hole of the recycler in the left-right direction,
and in the middle of the same in the front-back direction. User should adjust the directions one by one
according to the offset. If it is rightish in the left-right direction, users may first loosen the left-right
direction locking screws with an Allen wrench, then rotate the left-right adjustment screw with a
screwdriver clockwise to move the ink stream rightward, or counterclockwise to move it in the
opposite direction until the ink stream reaches the appropriate position, then tighten the left-right
direction locking screw;
Users may adjust the front-back direction in the same way. First, loosen the front-back direction
Locking screws with an Allen wrench, then rotate the front-back direction adjustment screw with a
flat-blade screwdriver, clockwise to move the ink stream forward or counterclockwise to move it the
other way