BMW X5 E70 Dynamic Damping Control faulty... I think it will happen again...
Vložit
- čas přidán 26. 08. 2023
- Consider to support my channel and all the hard work put into it at / lmautorepairs
Thank you
Hi
So, as per the title, I think this car will have the same issue again in the future, but for now, it is fixed...
The car, this is a 2010 X5, the E70 chassis.
Came to me with a couple of issues, one for the hand brake, link to that video below, and this one, a Dynamic Damping Control fault message on the I-drive and cluster.
A quick scan, helped to establish the problem, and some testing narrow it to the culprit faulty part, but then, something happened...
Follow me on this video to find out what was the problem and how to resolve it, well, at least for now...
Link for the Hand Brake fault video
• BMW X5 E70 Parking Bra...
Hope you enjoy the video.
Any questions or comments put them below.
Like always, thank you for watching! - Auta a dopravní prostředky
One of the better investments Luis. The resetable fuses. Together with a relay kit. As always , nice video.
☺️
👍👍👍
Where i can find those resetteble fuses kit?
Ebay and alike... for example...
👍👍👍
Lucky cheap fix is better than an expensive mistake! Trial and error, plus the simple reset can work wonders.
Indeed!
☺️👍
Hi Luis, Excellent work as always..
☺️
Thanks!
👍👍👍
Same problem with the M SPORT 7 SERIES
Good job man
Thanks!
👍👍👍
Good video!
☺️
👍👍👍
También sentias como un golpeteo al subir y bajar desniveles? Con el fallo ese?
I never really drove the car...
👍👍👍
I had that problem before it was from the internal wier of the damper satellite
The wiers were touching inside the insulation
It is because of the bad plastic materials
Will keep that in mind...
👍👍👍
what was localization of that? rear satelites ? connection box of rear satelites ? wire in connection box?
that's why I said customers with old BMW and low budget to take a walk :)
😅
👍👍👍
Nice
👍👍👍
i got same problem in my BMW X6 , its burning the fuse i try up to 10A, burned at the moment of plug always. Could someone help to find the reason ?
Follow the circuit...
If the fuse blows then you should be able to easily find the culprit circuit...
👍👍👍
thx a lot :)@@LMAutoRepairs
top
Thanks!
👍👍👍
Please take my espace...please