Hello sir, Aapne itna confusing topic bohot e easy way me samjha dia.. ar sabse best laga aapka example - "Cables are like veins in your body" ❤️. Isse accha example ar kuch ho he nahi sakta. Sir ji tussi great ho.. thank you so much 🙏
When listening, I prefer not to put up with the faint background signal noise (noise floor) One should try pressing pause or mute, and if one is unable to differentiate whether the systems off or on, that's telling you your cables are crap. When friends or guests come round rather showing them how loud the system goes I prefer to press pause/mute and show them how quiet it goes. Silence is Golden.
Thanks Tanmay for reiterating well known but often ignored basics. Fortunately in most HTS, most important speakers are front and centre, and they are mostly close to AVR, so having a good cable won't rip anyone off. And most Subwoofers are powered and fed by RCA cable, where OFC or thickness matter but not to that extent. Thanks again. Keep posting,, stay healthy, stay blessed.
SIR mere pass govo gosoround 970 model ha home theatre system hai.... Aur muje surround speaker ka wire extend karna hai to kaunsa wire best rahega ? Plz answer sir... Rear speakers par 24 awg likha hua hai company ka...
Thanks for your video, very informative and helpful for 1st timers like me. I've been having issue with both front and back speakers firing during testing when only back speakers are supposed to fire. The problem started after I had to uninstall my wiring during home renovation. I'm going to try purchase new cables and redo the wiring to check if it works. Any thoughts what could have gone wrong
Check if the cables have got open cuts in middle where they are getting connected to each other! Try checking the continuity tester, and also the connections at the amp back panel.
This is a fantastic video. I am an audiophile and I am looking for good quality cables. Your video will help to find one. The speaker cable amazon link you have given is saying it is out of stock. Do you have any alternative source? The chart you have given for selecting different cables for amplifier system mentioning the watts of the amplifier, are these RMS value?
Yes. These are RMS value. And you can get in touch with my team on bit.ly/mehtanmay for cables. Unfortunately the amazon ones are not available due to low copper availability
Sir while cabeling home theater can we run electricity cable with it or this both should run seperate from each other.if yes then somewere they will cross each other in full HT setup, how to aviod that wiring
Hi.. I'm new to ur channel, ur presentation is good,confident and we'll researched. Recently i have purchased a flat and I wanna use my living room for multipurpose. I want to have a home theatre in it. My living room size is 15X24, before i moved into my flat i have installed speaker cables through the false ceiling. I want to slowly purchase remaining components as and when I have resources. I was given quotation for my cables i want bring it to ur notice. How can I do it. Thank you
Hey Devdatta, Thanks for your query. Just checked with the team. You are looking for Polk Fusion T series. Which can work comfortably on 1.5 sq mm speaker cable. And currently 17AWG from Kasper is available with the same Thickness and Gauge. That’s why recommended. For the Polk Elite Signature or Reserve series, 14 AWG with 2.5 sq mm would have been recommended. So not to worry 👍🏻
Sir I have purchased sonodyne 5.1 micro speaker recent. The model number of the subwoofer is given on the Sonodyne website. The subwoofer model number is different in the package that is sent to me. Please tell me what to do?
Need help, talk to us -
bit.ly/GBAVIBA
Hello sir, Aapne itna confusing topic bohot e easy way me samjha dia.. ar sabse best laga aapka example - "Cables are like veins in your body" ❤️. Isse accha example ar kuch ho he nahi sakta. Sir ji tussi great ho.. thank you so much 🙏
When listening, I prefer not to put up with the faint background signal noise (noise floor)
One should try pressing pause or mute, and if one is unable to differentiate whether the systems off or on, that's telling you your cables are crap.
When friends or guests come round rather showing them how loud the system goes I prefer to press pause/mute and show them how quiet it goes.
Silence is Golden.
Thanks Tanmay for reiterating well known but often ignored basics. Fortunately in most HTS, most important speakers are front and centre, and they are mostly close to AVR, so having a good cable won't rip anyone off. And most Subwoofers are powered and fed by RCA cable, where OFC or thickness matter but not to that extent.
Thanks again.
Keep posting,, stay healthy, stay blessed.
Thanks a lot Vivek. Glad it helped you and many others :)
thanks lot all the explanations which is required for beginner 👍🏻👌🏻
Glad it was helpful!
Good information you are educating enthusiastic people like me
Omg! You are like superman! You just saved the day. Thanks a ton.
Haha! Thanks alot. Maybe, with great video comes a great responsibility 😀
Thank you very much brother.
Very good and informative video
Very Nice Information in easy way....
Thanks for liking
This was extremely good video
SIR mere pass govo gosoround 970 model ha home theatre system hai.... Aur muje surround speaker ka wire extend karna hai to kaunsa wire best rahega ? Plz answer sir... Rear speakers par 24 awg likha hua hai company ka...
Thanks for your video, very informative and helpful for 1st timers like me. I've been having issue with both front and back speakers firing during testing when only back speakers are supposed to fire. The problem started after I had to uninstall my wiring during home renovation. I'm going to try purchase new cables and redo the wiring to check if it works. Any thoughts what could have gone wrong
Check if the cables have got open cuts in middle where they are getting connected to each other! Try checking the continuity tester, and also the connections at the amp back panel.
Sir ji aapse request h please fixed frame Projector screen pe ek video banaye please 🙏 .
Sir Amazon Basics 12 AWG OFC speaker cable (CL2 Rated) kaisa h ??
Please make a video about Active studio monitors... in india...
Hello sir, kya may Amazon basic 16 guage apne sony aa d40 me use kar skta hun
Yes. You can use it 👍🏻
This is a fantastic video. I am an audiophile and I am looking for good quality cables. Your video will help to find one. The speaker cable amazon link you have given is saying it is out of stock. Do you have any alternative source? The chart you have given for selecting different cables for amplifier system mentioning the watts of the amplifier, are these RMS value?
Yes. These are RMS value. And you can get in touch with my team on bit.ly/mehtanmay for cables. Unfortunately the amazon ones are not available due to low copper availability
Monster cables superflat 500 is what I use...14 AWG
I have recently acquired BG Z92. Kindly suggest the cable guage and source. Also need to do biwiring.
Go for 12AWG
Can use electrical 2.5mm or 1.5mm sq for AVR to speacker or should I use speaker cable only...??
You need Pure Copper OFC speaker cable.
How frequently should one change the speaker cables? I am using them for about 5 yrs on a Yamaha Rx 7.1 Dolby Atmos
Use it till they start getting damaged 👍🏻
Sir while cabeling home theater can we run electricity cable with it or this both should run seperate from each other.if yes then somewere they will cross each other in full HT setup, how to aviod that wiring
Hey Apurva, it has to be in different conduits or the distance should be more. Wherever you can, try avoiding
Suggest me the best cable for sony dav dz151kb 3 ohm
Try checking the cables shared in the description
Very nice 👌 sir ji
Thanks
Nad 320. Stereo amplifier. What is your take on this amp?
NAD has some of the best Amplifiers! Go for it 👌🏻
Hi.. I'm new to ur channel, ur presentation is good,confident and we'll researched. Recently i have purchased a flat and I wanna use my living room for multipurpose. I want to have a home theatre in it. My living room size is 15X24, before i moved into my flat i have installed speaker cables through the false ceiling. I want to slowly purchase remaining components as and when I have resources. I was given quotation for my cables i want bring it to ur notice. How can I do it. Thank you
I have done cabling for a 9.1 Atmos support
Hey Deep, recommend you to get in touch with us using bit.ly/AVIBA Would love to guide you
I was advised 17 AWG Cables by Touchwood Automation for my Polk 5.1.2 system. You are suggesting 12-14. Is it correct?
Hey Devdatta, Thanks for your query. Just checked with the team. You are looking for Polk Fusion T series. Which can work comfortably on 1.5 sq mm speaker cable. And currently 17AWG from Kasper is available with the same Thickness and Gauge. That’s why recommended. For the Polk Elite Signature or Reserve series, 14 AWG with 2.5 sq mm would have been recommended. So not to worry 👍🏻
@@TanmayMehta Ok. Thanks 🙏
For Logitech z906 which cable gauge i should use. The original given one is 18 gauge
Either of 16 / 17 / 18 AWG is fine
Sir
I have purchased sonodyne 5.1 micro speaker recent. The model number of the subwoofer is given on the Sonodyne website. The subwoofer model number is different in the package that is sent to me. Please tell me what to do?
Hi Surajit,
Share the details with your dealer, Iam sure they will help you
80W , 8ohm Kenwood 3 way speaker, which cable
2 core 2.5 sq mm OFC Speaker Cable.
I have speakers 4 OHM and 60W in car , which cable i can use
12 or 14 AWG is good
@@TanmayMehta for plug and play with android , i am not using any amplifer
good marketing video not technical