Thanks, your English is very good. I understood everything. Thank you for all the help you gave on what wasn't in the installation manual. Great video, very thorough yet concise
You did very quick. It took me 3.5 hours to finish (with video taking). Actually installation is very easy, just don't know why took me so long to finish it.
In my video, 2 places are missing, removing door panel and changing the cup on the tail gate. Actually I was taking the video, but forgot push the record button.....
Not really necessary to record it. It was pretty straight forward. I didn't have to buy nuts for the 10mm bolts either as they screwed right in to the hatch. I did have a problem when i plugged in power to the unit. A constant beeping sound was on. It turns out, i just unplugged the clip going into the hatch lock and reinserted. It seems that reset it. Working like a charm now. Thanks again! One modification i wish could be done like this is the blind spot monitoring for the mirrors.
The long beeping sound is initialization remind. All you need to do is manually close the lift gate. BSM is very pricy. I've found aftermarket BSM, which uses millimeter bsm sensors (not cheap sensors like parking sensors). Total cost include ship to US will be over $600. Installation is difficult. The difficult is running wires through side view mirror. I've done that when I install arrow turn signals (see my video). I'll not do that again. If you are interest in aftermarket BSM, here is the link: item.taobao.com/item.htm?spm=a230r.1.14.16.PF6mjv&id=524018425603&ns=1&abbucket=10#detail It comes very thing you need, include the mirror.
In your video you say that the unit must be connected to the OBD port. My package did not come with any way to do that and NO instructions about how to do it! It works fine with the buttons in the car but no Key Fob activation. Can you explain how you did yours. Thanks
Hi! Do you have a rear view camera? I am looking forward to buy and install one myself... DIY will be great on that.. where do you get your tech info for installation?
I love these things I watch some put their shopping in the back of their car press a little button and walk round to the front of their car as their boot closes . With just enough time for someone to Nick the contents from your boot
Nice work. Great video but, I feel that the door is slamming a bit too hard. Can adjustments be made to the struts to lower the gate slower? Is this kit made for a 2011 Toyota Venza?
Can be installed and operated on a car do not have a computer and how it is run in this case? Although Alodhirah been installed and stayed only method of operation. Thank you
hello, I have also just installed an electric tailgate, but after making adjustments and adjustments, it appears that the trunk door is being sucked down too much when it is in the closed position. and I'm confused about how to make the trunk door position a little less tight.
wow that is a great install how much does the kit cost i have a dodge magnum wagon i would love to this mod to it do you know if the la sell a kit that i can use thank you for your help great job
hi there, can you send me the measures of the struts? fully opened and fully closed? , im thinking to adapt one of your kits to a Mitsu Galant from 2000 thanks
I took a tailgate it's not closing completely. However the company is claiming that it's of Kia seltos. Can u pls suggest me as how to install it. Even after the struts are completely at the close position the tailgate is not not closing
Hi, I recently became paralyzed and cannot stand to open the trunk of my 2013 Rav4LE. I was given a quote by a local company that the parts would cost $1000 and labor $500. Any ideas what other type of companies might do this type of installation? The dealer where I purchased my Toyoto won’t. Two companies that make cars wheelchair accessible doesn’t do this type of work. I’m stumped. If this guy can do it why should it be so expensive. Thanks for any ideas.
You can buy the installation kit from manufacturer directly. Total cost should be about $500. Installation could be 3-4 hours. I finished installation in 2 hours, but I used another 2 hours to prepare. If $150/hour, installation cost will be (at least) $300. So $800 include installation should be good deal. This is the contact information: Violin Wu, Sales Representative, Her Tel: 011 86 18664821320 Guangzhou Changyi Auto Parts Limited Liability Company Address: #36, Sangtian Yi Road, Yonghe Street, Huangpu Area, Guangzhou, Guangdong-511356, China Tel: 011 86 20 32222414 Skype: wuyalingviolin@outlook.com email: violin@incalcd.com www.changyi-china.com
I am sorry not being negative but don’t you think the trunk shuts with bit of force or you need inner tailgate plastic clips linking metal bit to the inner trunk card, as they might be noisy when the trunk shuts.
Is this from AutoEase? Did anyone buy and install this on 2013-2016 Nissan Pathfinder? How much and is there any import tax charge for those who bought directly from China?
Well done. Give the man a round of applause.
Thanks, your English is very good. I understood everything. Thank you for all the help you gave on what wasn't in the installation manual. Great video, very thorough yet concise
I’m with u.
You are a hard working man!, i have such respect for you, I salute you sir! :)
THANKS!!! :))
When you pur your heart and mind to something, nothing can stop you from accomplishing your goal. Bravo 👏.
Well done! You have lots of moxey to take on such a projest so my hat is tipped in your honor. Thanks for the vid!
One man install. Great job. 👍
Just installed mine. Purchased from you. Works great! Took me about 2 hours. Thanks!!!
You did very quick. It took me 3.5 hours to finish (with video taking). Actually installation is very easy, just don't know why took me so long to finish it.
+Cz Gu I watched your video twice before doing it. It helped a lot.
In my video, 2 places are missing, removing door panel and changing the cup on the tail gate. Actually I was taking the video, but forgot push the record button.....
Not really necessary to record it. It was pretty straight forward. I didn't have to buy nuts for the 10mm bolts either as they screwed right in to the hatch. I did have a problem when i plugged in power to the unit. A constant beeping sound was on. It turns out, i just unplugged the clip going into the hatch lock and reinserted. It seems that reset it. Working like a charm now. Thanks again! One modification i wish could be done like this is the blind spot monitoring for the mirrors.
The long beeping sound is initialization remind. All you need to do is manually close the lift gate. BSM is very pricy. I've found aftermarket BSM, which uses millimeter bsm sensors (not cheap sensors like parking sensors). Total cost include ship to US will be over $600. Installation is difficult. The difficult is running wires through side view mirror. I've done that when I install arrow turn signals (see my video). I'll not do that again. If you are interest in aftermarket BSM, here is the link:
item.taobao.com/item.htm?spm=a230r.1.14.16.PF6mjv&id=524018425603&ns=1&abbucket=10#detail
It comes very thing you need, include the mirror.
Its only "loud" because the license plate doesn't have a dampening mount. Cool mod! Looking to do this to my older ford escape!
Did u do it?
After seeing all of this, I think I’ll keep my manual liftgate 😂
Where can get the power lift gate mechanism ?
Please advise .
Hi: Is there one of these that will fit a 2016 GMC Terrain?
In your video you say that the unit must be connected to the OBD port. My package did not come with any way to do that and NO instructions about how to do it! It works fine with the buttons in the car but no Key Fob activation. Can you explain how you did yours. Thanks
Can you attach a link to the website that appears in the video (installation instructions)?
Hi! Do you have a rear view camera? I am looking forward to buy and install one myself... DIY will be great on that.. where do you get your tech info for installation?
Nice job. The door slams pretty hard though. Is it normal and do the OEM units also slam that hard
I love these things I watch some put their shopping in the back of their car press a little button and walk round to the front of their car as their boot closes . With just enough time for someone to Nick the contents from your boot
That's the fastest pwr closing gate I've ever seen
Where can I source the kit for RAV4 LE the same as you have shown in the video.
Nice work. Great video but, I feel that the door is slamming a bit too hard. Can adjustments be made to the struts to lower the gate slower? Is this kit made for a 2011 Toyota Venza?
Mike Cooper I would rather it close hard and make sure it's closed!
It slamps because there is not electronic latch
Hi, Is this fit in Jeep Grand Cherokee Limited 2012?
Do you have one that would fit a 2003 Subaru forester ?
Great job. Can this be done for 2004 GMC Yukon?
Is it available for a 2013 Mercedes-Benz B Class
Can be installed and operated on a car do not have a computer and how it is run in this case? Although Alodhirah been installed and stayed only method of operation.
Thank you
I installed on a 2016 Honda HRV. Only problem, the factory remote does not activate the system. Can you assist?
Do you have for Toyota Estima 2007 and Honda Accord 1994?
is this available for Ford territory 2004? I can't find on ebay.
do you have something for a 2013 ford galaxy?
thanks
is the 3rd gen available for a 2005 VW Touareg?
Do you have the Aftermarket power liftgate for 2015 Jeep Grand Cherokee Lerado
Do you have for Nissan Pathfinder SV-Tech 2018?
Do you have for Honda CR-v 2010? 4th Gen?
hello, I have also just installed an electric tailgate, but after making adjustments and adjustments, it appears that the trunk door is being sucked down too much when it is in the closed position. and I'm confused about how to make the trunk door position a little less tight.
Hey do you have it for a 2018 Honda Accord?
Does it lock automatically or you have to lock the doors manually?
Cool
And i do agree that you need two nuts
Thumbs up
What are you connecting the cable to at 23:28 that looks like a motor?
Do you have a unit for the 2019 Subaru Outback?
Do you have a kit for a Changan CS75 2017?
Is there anyway I can fit an electric tailgate on my 2011 Range Rover l322?
What website you went to see the install diagram?
is there a kit for 2013 sienna?
great job , hopefully you live on us tennessee 😅
I want to install automatic trunks door for my 2023 rav4 LE hybrid, please let me know.
is there a kit for a 2018 toyota 4runner?
How and where can I get this for a 2020 Hyundai Santa Fe. I want to add a power liftgate to my vehicle?
Dear Sr , can you help me ? I have problem with Canbus box !!
Will this fit a 2016 Nissan Pathfinder SV
Are there any kits that fit in 07 Chevy Tahoe
Will it fit to kia sportage 2014?
Do you have for Honda Mobilio 2017?
Do you have the link or the model of this product?
@czgu6398 do you have a kit for a 2nd gen sequoia sr5?
Hello, is this product compatible for my Peugeot 5008 2018? How much it costs and where to buy it from? Thanks
Where did you buy this kit at? Can you post s link?
wow that is a great install
how much does the kit cost
i have a dodge magnum wagon
i would love to this mod to it
do you know if the la sell a kit
that i can use
thank you for your help
great job
Do you have the kit for toyota sienna le 2013?
Wow that's so cool we're do we buy this item for SUV.
Where I can get this system? Do you have the brand? Thanks
Anything for a first generation Toyota sequoia??
Is there one for a Mazda CX-7 2009
Is there a website for this product?
Nice work! Thanks for sharing!
It's been 5 years, is it still working?
What about it
are there any power liftgate for Toyota highlander 2020
any for 2018 subaru forester?
Will it fit in honda brv?
How will it work via remote if you don't have the liftgate button on your current key fob?
pistolpeteski he pressed the unlock button twice and then twice again
If u wanted it why did u not get the xle ?
Loud and fast, but convenient I suppose.
Do you have for mazda 5 mpv 2014 7 seater
Do you have one for the 2006-2008 Mercedes ML 350? And if so can you include a link
No we don't have
what about GLK350 2012 mercedes Benz?
mitsubishi pajero sport 2016 -2017 it ok ??
Do you have power liftgate for viano 2005?
do you have for btw 2008 x5
Help please! I installed power lift gate (autoease) on Toyota Highlander 2019. It doesn’t open completely (90%)
Sounds like you're fucked.
Can I put this feature on my 2012 rav4
Does it work, on yaris.? Where did u buy?
received lift gate but no instruction 2017 jeep cherokee
hi there, can you send me the measures of the struts? fully opened and fully closed? , im thinking to adapt one of your kits to a Mitsu Galant from 2000
thanks
I don't have installation kit for Mitsu Galant, and also I don't have any installation kit for vehicles older than 2012.
It supports tiguan?
Where did you buy it from?
Where can I buy the lift gate please?
Was it expensive ??
Did you get the buttons for the front and onre that goes on the lid?
Yes, it came with two push buttons.
I took a tailgate it's not closing completely. However the company is claiming that it's of Kia seltos. Can u pls suggest me as how to install it. Even after the struts are completely at the close position the tailgate is not not closing
Do you have kits for 300 series land cruiser vx
Hi, I recently became paralyzed and cannot stand to open the trunk of my 2013 Rav4LE. I was given a quote by a local company that the parts would cost $1000 and labor $500. Any ideas what other type of companies might do this type of installation? The dealer where I purchased my Toyoto won’t. Two companies that make cars wheelchair accessible doesn’t do this type of work. I’m stumped. If this guy can do it why should it be so expensive. Thanks for any ideas.
You can buy the installation kit from manufacturer directly. Total cost should be about $500. Installation could be 3-4 hours. I finished installation in 2 hours, but I used another 2 hours to prepare. If $150/hour, installation cost will be (at least) $300. So $800 include installation should be good deal. This is the contact information:
Violin Wu, Sales Representative,
Her Tel: 011 86 18664821320
Guangzhou Changyi Auto Parts Limited Liability Company
Address: #36, Sangtian Yi Road, Yonghe Street, Huangpu Area, Guangzhou, Guangdong-511356,
China
Tel: 011 86 20 32222414
Skype: wuyalingviolin@outlook.com
email: violin@incalcd.com
www.changyi-china.com
I am sorry not being negative but don’t you think the trunk shuts with bit of force or you need inner tailgate plastic clips linking metal bit to the inner trunk card, as they might be noisy when the trunk shuts.
will function in a hr-v (honda vezel) ELX year 2016? How much? Do you send to Brazil?
Cz Gu Ivand dhis kit saar
looking for a kit to fit a 2017 Dodge Journey ? Is this available anywhere?
No I don't have that one.
Awsome . Thumb Up
do you have a kit for a 2002 toyota sequoia? if you do you also have some ome that could install it
No I don't have it.
I got a nose bleed watching this 😂 I agree sticking to my manual lift gate...thanks
I got it on my car thx sooooooooooooooo much
Is this from AutoEase? Did anyone buy and install this on 2013-2016 Nissan Pathfinder? How much and is there any import tax charge for those who bought directly from China?
Where can I purchase the power liftgate for a 2014-2015 Highlander?
email me
Where can I purchase this? Thanks in advance
Where can this be ordered from and cost?
Is there a power liftgate for a 2007 Infiniti fx35? Thanks.
Hello can i ask how to lock the trunk of mux
I have a scion tc 07.
would it fit it. it has a hatch door?
can I get a link to buy one
if it fits
thnkyu
No I don't have one for any vehicle before 2012!!