[@travis6488]

Shorty needs a cluster upgrade

[@edan7813]

True. Need that 6 gauge setup or something like chompers Escalade cluster

[@Nnbs.x1]

A Denali cluster would do the job

[@cuh3036]

Crazy to me how it doesn’t have an oil pressure gauge. That should be there regardless of trim level

[@MichaelsMotors]

Ngl almost cried when I saw the title of the video, I love flow master mufflers.

[@thejuddmotorcrew]

Absolutely love the content. Just wanna let you know my friends 5.3 had a blown head gasket so I told him to watch your video of camming chopper and thanks to you it he made up his mind and now he has pretty much the same setup as chopper so thank you

[@travelingman217]

Chomp chomp chomp chomp chomp.

[@markfahrney224]

Gotta be honest, I am not a fan of a lowered truck but I am a fan of this truck. I think it looks awesome.

[@jasonwynn2669]

Man that set up sounds really good. Especially with headers and no cats 👍🏻👍🏻

[@Todd_S]

I think it sounds good. I am a Flowmaster fan. I have a Super 40 muffler on my GMT900 Silverado 1500. It has a single 3" exhaust with a 4" tip. If you have a genuine Flowmaster muffler on Shorty, too would have the part number embossed on one end and Flowmaster stamped in the case.

[@caydenspianostudio1885]

I love flowmaster. I've got a Flowmaster 40 on my 2002 Ford F-150 Kingranch 5.4. About to put a super 10 in its place

[@KsKaylor]

I’ve always been a huge fan of Flowmaster especially the 40 series which is what your truck has. No other muffler gives that legendary hollow note.

[@jacobanderson3298]

Black widow mufflers sound awesome two race venoms would be bad ass

[@wesleyd4310]

Pretty clean exhaust set up for that truck!

[@bradyadams2365]

Other than chomper this is the best sounding 5.3 I’ve heard…

[@DatdudeTi]

Definitely needs a side exit in front of passenger rear tire 😮‍💨👌🏻

[@erikwyczalek]

I had the same issue with the exhaust 2 years ago when I did my truck and just welded it on lol. I cammed the truck a month ago and finally got the correct connector and fixed it😂

[@cros_bae6231]

I’m a big fan of the carven r muffler sounds great I think it would be a good idea to do single straight pipe to the muffler and do like a dual exhaust tip out and dump to the side right before the tire

[@ShewantsAndyy]

I’m running a carven r on mine soon with headers and I can tell you it’s screams

[@ITCANBEDONEIFYOUPUTYOURMIND2IT]

Well I can tell you now I have 2017 gmc sierra 6.2 I've tried the 40 series single in dual out was too quiet so then i went with long tube 1 7/8 headers no cats x pipe straight 3 inch pipe to 2 super 10s with 8 inch tips and to me sounds good idle but on gas is very raspy.
I'm actually still testing exhaust components this is my 5th set up already tried long tube headers straight to just x pipe too loud and raspy just like you just mentioned in this video. Straight piped also I almost gave 2 different places elderly people heart attacks lol.
So im still searching for that loud deep bassy sound I've had with other vehicles these newer lt engine trucks just seem to be a little difficult to pin point the right sound im looking for.
As always brother keep posting those videos cause it's always good content 👍

[@jonathonwilson5998]

I love the truck, I had a 2009 gmc sierra single cabe short bed with the same gauge cluster and I swapped in the gauge cluster with 6 gauges so it added a oil pressure gauge and a volt gauge. Direct swap plug and play and both worked. I think you should add that and the 4 driver information buttons on the left side, that lets you see your fuel mileage and alll the stuff like that and it all works becuase the plugs are already in the dash.

[@JuanHernandez-kc1gl]

Did you have to change the odometer readings on the new cluster to your truck? Or do they change once you plug it in?

[@redfox4116]

Love this truck I hope maybe just maybe baby squat or one very similar makes a introduction

[@_That_blue_6.0_]

Sounds a Flowmaster super 44, I have one on my truck with no cats and I love it

[@CrownMadeDH]

Chomper needs you to do the all light mod and a Corsa muffler on both the shorty and chomper

[@bensutherland6871]

Sounds awesome

[@exsampel]

I’m going cat back straights on my Ram. Thing sounds sweet bro

[@MidwestMotor]

I didn't care for Flowmaster either but after running Dynomax Race Bullets (which are frikin awesome but too loud) and another setup I had - my 3rd and final setup is 2 Flowmaster FlowFX on my 2021 Durango RT, Tow N Go - which has the SRT exhaust system. Sounds great actually! 🏁🏁🏁🏁🏁

[@user-qx3ed6mf4m]

Keep up the good work👍.

[@rileycarelock6481]

If you can find them, a denali dash, seats and center console would be awesome on shorty

[@JoshSmith-ky4pb]

Ive got a 2013 Silverado with the 6.2. TSP long tubes, true dualed with a xpipe with 2 corsa pro series mufflers dumped right before the rear axle. I love it. ZERO DRONE. The muffler is designed to eliminate drone. Theyre exspensive but worth it

[@0791hd]

I bet that thang be clappin

[@JoshSmith-ky4pb]

Nope

[@0791hd]

😢😢😫😭

[@rodrigorodriguez5246]

My boy a takuache now 🤘🏽

[@dulebrothers2850]

Love the vids keep up the good work

[@IanLt4]

Flow fxs are neat for that hollowed out sound. You should try a black widow race venom

[@2toned.z68]

Carven TR is my fav paired with the X pipe if you don’t like a lil clap

[@mariohamby3380]

You should try a dual outlet passenger side exhaust on shorty

[@jordansims2208]

Flowmaster is 10x better than those true duals you usually run. That’s just me though. To each their own!!

[@diegomarquez9523]

Not gonna lie It’s a clean sounding exhaust 🤌🏼

[@bandit0724]

Sounds pretty good! but I prefer louder!

[@fluxgore6624]

I never liked flowmaster as well... But I agree with you, It sounds amazing on that truck

[@theardaturanfreak]

you need an equal length setup. Still surprised you still didnt do it :D

[@trin_sierra]

Corvette style tips would look sick

[@LupeSmasher]

Like if you’re waiting on the “the return of baby squat” video 😅😅

[@AT-yf7qc]

I am also hoping to see a reappearance of baby squat.

[@NB-cn9uk]

Your doing Mexican Texas style nice cuh 🤙🏽🇲🇽🇺🇸🇨🇱🤘🏽

[@georgefriesen4378]

Sounds good

[@beatwolf44]

Yoooo! You need one more thing! It's called the Chuck Norris cam!

[@connorfisk4894]

True dual it I miss the days where eveything got the true duals

[@fredp3088]

Damn it sounds good

[@kyleharris401]

I have a 08 gmc sierra and I am planing on doing the speed engineering long tube headers but idk what muffler I have a flow master super 10 now and do plan on getting a cam too

[@tristannivens3269]

Flowmaster isn’t my favorite but I’m running dual 3” FlowFX with an x pipe and long tubes and I get compliments all the time. It’s not a chambered muffler like most Flowmasters. It’s similar to a Magnaflow.

[@socal_c10]

My only complaint with the FlowFX is that they can be a little too quiet. I have them on my LS swapped square and at idle can’t hear the damn thing.

[@tristannivens3269]

@@socal_c10 What’s the rest of your setup? I have long tubes and no cats. They sound great at idle in mine.

[@socal_c10]

⁠@@tristannivens3269Exact same setup. Can barely hear it running at idle. Dual 2 1/2 is the only difference.

[@dictatorofsalt5902]

try out Black widow mufflers they sound amazing with no drone atleast to my ears, my old exhaust i could hear over my subwoofers

[@markkraczek8715]

It's a flowmaster super 44. Have the same setup on my 01 🤘

[@mattward330]

Probably a 50 series flowmaster on it. I'm in middle of putting longtubes on my silverado single 3" to existing dual super 44s.

[@thatchicagoguy7370]

Spintech mufflers is what you want

[@fidelsedano5.9]

Needs a corsa side exit exhaust tip

[@benballou5953]

It’s a flowmaster 40 single in dual out my dad ran the same on his 01 Sierra

[@jamienettles4044]

Go with corsa pro series mufflers dual tips out the side in front the back tire

[@jordansims2208]

Flowmasters and speed engineering is the best sounding exhaust out there. Idk why people hate flowmaster.

[@weethee2351]

Why didn’t we get a floor the piss out that thing clip 😂

[@calebfelts962]

I would do a di/do magnaflow that has a built in x better flow and sound

[@ethan5989]

That a 40 series flowmaster u should True dual with two flowmaster super 10

[@chuckplainview4085]

Could do black widow 3 inch in dual 2.5 outs and then 2.5 turndowns dumped under the bed

[@337bayouboys]

that’s definitely 40 series Flowmaster but I’m not gonna lie the Flowmaster 10 series with no Cadillac converters on a 5.3 sounds very good but I mean, it is a little loud, but not crazy loud

[@mikeloper2381]

I think it sounds bitchin! Love what you’re doing to Shorty! Can’t wait till you put a cam in it!

[@nathandowns2154]

3 inch duals with an x pipe!

[@harleyschepp2506]

Perfect

[@bdtaylor1979]

The sad part is that you’ve become so deaf over the years from the insanely loud exhaust on your other trucks that you actually think a Flowmaster is quiet.

[@chillwitgt_2947]

Did you have to take the engine out to install headers?

[@caydenmeadows8464]

Flowmaster 40 series for sure

[@Rienda_siembra]

Si quema cuh 😎

[@ViktorG24]

Shorty needs some smoked tailights, would really add to the color theme

[@Ncoleman1x]

Hate flowmasters huh flowmasters the best sounding exhaust

[@stephaniecervantes8800]

🔥🔥

[@socal_c10]

I’d say run Magnaflow Bullet Mufflers!!

[@eshott396]

Custom cluster?😏👀

[@alanhernandez8487]

Do a corsa exhaust on shorty 😟?

[@coreycain7378]

Put a 2step in the single cab 😳😳😳😳😳😳😳😳😳😳😳

[@dannyg3445]

I added Velocity headers and the engine noise is absolutely horrific, makes my 2011 seem like a 78 farm truck

[@brennanjensen4535]

You should put a cam in it

[@zacharywood7328]

Try the speed engineering cat back exhaust

[@wesleyd4310]

Can we get 0-60 times with headers?

[@jorgekilluh99]

I've been a flowmaster fan I always ran the original 40s lately I've been on thier super 10 series people say they don't flow.... these engines aren't 500hp or a big block yes the magnaflows flow maybe 1 hp better but I don't care for the sound of magnaflows your not gon a see a difference in "flow" with a non turbo, or supercharged 5.3 .. I would do the tips too the side for more sound and maybe do a single 3in too 2.5 out flowmaster original 40 or super 10 pipes with 4 inch tips too the sides

[@user-st9ym1gc7w]

Hear me out take the chrome off and color match the windows door handles and tail gate. The chrome gives it that papaw look a little

[@tony-bq8nd]

needs a upgraded radio

[@Slidin_OBS_07]

I have to agree. I hate flow master too

[@samking9733]

Carven R series all the way

[@kev_lsn7042]

That’s probably a flow master super 40. Plain Jane muffler. The flow master super 10 however is a lot better compared to the rest of the flow master line up. Mainly bc it’s the smallest muffler they offer.

[@austinbond8634]

Here to remind you that you said you wanted to get an alignment done on shorty

[@DaSouth3860]

Go with a true duel set up

[@jerrodgrimes4605]

What can you going with? My 2010 just rolled 250k with AMF deleted by tune at 140k. Lifters are getting loud. I believe I’ll be going stage 3 Texas speed.

[@tristannivens3269]

If you go with a stage 3 cam you’ll probably need a torque converter also.

[@lmfscrew]

I’m undecided but have been looking at the mad max

[@JoshuaOusley]

@@lmfscrew so i was looking for an honest opinion im thinking about getting catback 3” true duals with a xpipe out to five inch rolled tips how do you think it will turn out ive never seen or hurd of it but i think it will sound amazing but just wanted a true exhaust enthusiasts opinion on it

[@e.leyva02]

👍

[@jakeappleton3539]

Your muffler is probably a flow master super 40, I had a midas raven series, sounded just like a flow master 40, was horrible sounding, was loud but not obnoxiously loud, nothing beats straight pipes but some states have strict laws on straight pipes, thankfully the state I live in doesn't have strict laws, as long as you don't rev up and drive crazy cops don't mess with ya, sadly if your truck is squatted, cops will pull you over, issue a fix it ticket, after two times law enforcement will impound your truck, I think the legal limit in the state I live in is that the front on the vehicle can only be 3 to 4 in higher than the rear

[@thecrow1727]

Needs to be tuned by gpi performance

[@Chevyman341]

Ever thought about flowmaster super 10s? They are better sounding and a lot more volume.

[@kennethmoyer1980]

Its a flow master super 44 that you have on there. They are not as loud as original series 40

[@cartervooys4327]

Go with dual carven r or tr 3 inch

[@michealharper1987]

Have a 2006 with cammed 4.8 have a 2.5 inch muffler by spin tech it's there 9000 series sounds is unreal send you short video if interested

[@lifewithgage8791]

Put turn downs on it that turns down right off the muffler

[@stephaniecervantes8800]

Would you do any kind of giveaway?

[@texas_beachbum7016]

Try flowmaster super 10 or the outlaw

[@CartwrightFour]

Peel off the 4x4 decals!

[@angelosalbright4024]

I’d have to guess flowmaster super 44

[@trcoutdoors247]

Definitely flow 40

[@trcoutdoors247]

Or 44

[@zacharybolanos6567]

A side exit would look sick

[@214deleon4]

That’s a flow master 40 or 44, they both have same sizes just chambered differently

[@codysparks092]

Corsa muffler!! Or magnaflow bullet!!

[@abeballard1976]

The only flowmaster I like is there flowfx series.

[@KFXbuilt207]

Super 40, super 44 is on shorty