How to Replace Steering Rack & Pinion 2009-2014 Nissan Maxima
Vložit
- čas přidán 6. 09. 2024
- Shop for New Auto Parts at 1AAuto.com 1aau.to/c/242/a...
This video shows you how to install a new TRQ power steering rack and pinion assembly on your 2009-2014 Nissan Maxima. The rack and pinion assembly transforms the turning motion of your steering wheel to the push and pull motions that turn the front wheels of your vehicle, as well as adding the power assistance. If the steering rack on your vehicle is leaking, or damaged in some way, you might need to replace it entirely.
This repair was done on a 2010 Nissan Maxima S 3.5L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2009 Nissan Maxima
2010 Nissan Maxima
2011 Nissan Maxima
2012 Nissan Maxima
2013 Nissan Maxima
2014 Nissan Maxima
Tools you will need:
• Pry Bar 1aau.to/oXr/1AX...
• 10mm Wrench 1aau.to/oZG/1AX...
• 19mm Wrench 1aau.to/oZG/1AX...
• 21mm wrench
• 22mm Wrench
• 12mm Socket 1aau.to/obEC/1A...
• 14mm Socket 1aau.to/obEC/1A...
• 18mm Socket
• 19mm Socket
• 21mm Socket
• Locking Pliers 1aau.to/omB/1AX...
• Pliers
• A Piece of Pipe (for leverage)
• Ratchet 1aau.to/obIq/1A...
• Socket Extensions 1aau.to/obEC/1A...
• Swivel
• Torque Wrench 1aau.to/oaMs/1A...
• Cotter Pin
• Gloves 1aau.to/oanM/1A...
• Power Steering Fluid
• Safety Glasses
• Wire Ties
• Chisel 1aau.to/omj/1AX...
• Floor Jack 1aau.to/oabG/1A...
• Hammer
• Jack Stands 1aau.to/oYE/1AX...
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Nissan Maxima 7th Generation 2009 - 2014: • Nissan Maxima 7th Gene...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
She is such an awesome mechanic! Her instructions have helped me out more than words can express
Real good mechanic gets right to the point don't talk too much
Nice to see a woman doing that job, well done, it's not easy.
Some jobs are just best to pay a mechanic and this is one
I know I’m capable of doing the job but I’m hoping that somebody says yes the video is 28 minutes long and that’s how long it took us ,,, which we all know is probably triple that ,,, also I want your torque wrench
I am doing this job RIGHT NOW. I am pretty good with tools, but removing those lines has proven to be quite the challenge. I dont have the benefit of a lift so im on jack stands. Gonna finish the job today. Fingers crossed.
So how long was your surgery? I have 317k on my ‘11, racks leaking and am considering 🙄🙄 surgery. … or just donate as I have the ‘17 also…
Probably the most brutal job that I’ve ever done on a car.
Grate video, thanks! Do you have to do a front wheel alignment after the install?
Thanks for this video. You saved me a lot of hassle and probably money.
Great video, so much harder working off the ground.
is this the same process for a 2010 Nissan Altima?
Great tutorial and very thorough. ❤👊❤️👊❤️👊
Can you please do for 2009 nissan altima
Look like the same of Nissan Murano ? Thanks
What size banjo bolt is use for the high pressure line
Is the Sentra the same
Pro tip: get a 3 ft extension for your ratchet. You’ll be able to reach the high pressure line from the passenger side very easily
Thanks! You were AWESOME in this tutorial. Professionally Done!! 👍🏽👏😎 Semper Fi! Fly Marines!
+@renegonzalez6465 Thanks for watching our video! 1aau.to/m/Shop-TRQ
What was the customer complaint? My steering has a lot of tension but the pump isn't making noises and I can see fluid pumping in the reservoir so I'm thinking it's got to be the rack
Great video
Thanks!
My power steering is hard after I did all of this. How do I fix.it?
Can this be done same way on an 07 murano awd?
You made that look really easy to do 😅😅
+@M.A.S.8513 Thanks for watching our video! 1aau.to/m/Shop-TRQ
I had someone help me do my rack n pinion and he messed up that part from the steering wheel. a
اتمنى أن يكون شرح عربي
How do I know if I have an EVO rack or not 2009 maxima? Thank you
Good question. I'm in the same situation
Can you do for audi 2017 a4 pleae
+Erick We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-TRQ
We’re can I buy it from you
+@nostarvintruendeed5939 Thanks for watching. Buy the part in this video on 1AAuto.com: 1aau.to/m/Shop-TRQ
I'm sorry.i was looking for the men's department.