Are you doing great video I have a 2007 mazda6 and I have spark have new spark plugs I have new oil I got plenty of gas I undid my gas line and turn my ignition and a lot of gas came out I filled up a bottle and so it's getting gas but it's just not starting I spray it in my throttle body and it starts right up so that tells me it's not getting gas but when I turn my ignition and so it makes me wonder what my problem is and I seen your problem with your car I know yours is a 20-17 mine is a 27 I also have a fuel pressure regulator
I was saying your car is a 2017 and my car is a 2007 so there is a little similarity maybe I have the same problem but your car was running and the problem that I have is my car is not running it's not getting any gas at all so I'm glad you were able to fix your problem but I need to fix where why aren't I getting any gas as I'm trying to start it of course when I take my gas line off it shoots gas out sure that's pressure freely but under pressure when it's connected is that my problem when it needs to get to my engine gas bar where my fuel injectors go is my gas bar getting enough gas for my injectors to push for it to start cuz if I spray my starting fluid in my auto body it starts right up for a few seconds so I'm stuck to find out if it's at my fuel pressure regulator my fuel rail pressure sensor or my fuel injector pressure regulator I have so many questions so as of right now I'm not getting any gas shoots out of my fuel line but it just ain't starting and I'm thinking I'm not getting enough gaswhile I'm trying to start it and turning Mikey and kicking my engine over its sputtering but it ain't starting so that's where I'm at right now for some reason I'm just not getting any gas
I got pc0087 and p0192, after fixing some wirings the problem of jerking at high speed and engine stalling is gone. But now the pickup is low on uphill driving till it reaches 1500 rpm, once beyond 1500 rpm the pickup is good in my diesel ecosport 2018 modal. Any idea if this is due to faulty pressure sensor ?
Hi i have Mazda 3 1.6 diesel 2010 I got P0087-21 and P2002-21 and I’m having stalling before and that’s automatically gone and some times I feel small jerking when the car idle but very less and random . Now I’m feeling pickup is too low and I can’t even drive uphill properly performance and fuel efficiency too low . Can you please explain what’s the issue ?
Sir you can remove the fuel relay then disconnect the fuel pipe from the high pressure.. take a used fuel pump if you have of any car which is good working and directly connect a pipe to that and connect it with the high pressure and dip the fuel pump in a can full of petrol and connet the wires to the battery start the car if the car is good then change the fuel pump..
You're replacing the WHOLE HPFP. It's not just a sensor like is said in the video. In "How To" videos, you actually need to show "How to Do it". If it is just informative, then show a picture, say a few words and be done. Otherwise, it doesn't help anyone.
Good luck 👍
Very impressive...
👍👍👍
Great accent bro 👌
هل انت مسلم يا عزيزي .؟!🤔🤔
Md muslim uddin Bangladesh Dhaka good vi
good video. where do i find the fuel pressure regulator on this model?
Are you doing great video I have a 2007 mazda6 and I have spark have new spark plugs I have new oil I got plenty of gas I undid my gas line and turn my ignition and a lot of gas came out I filled up a bottle and so it's getting gas but it's just not starting I spray it in my throttle body and it starts right up so that tells me it's not getting gas but when I turn my ignition and so it makes me wonder what my problem is and I seen your problem with your car I know yours is a 20-17 mine is a 27 I also have a fuel pressure regulator
I was saying your car is a 2017 and my car is a 2007 so there is a little similarity maybe I have the same problem but your car was running and the problem that I have is my car is not running it's not getting any gas at all so I'm glad you were able to fix your problem but I need to fix where why aren't I getting any gas as I'm trying to start it of course when I take my gas line off it shoots gas out sure that's pressure freely but under pressure when it's connected is that my problem when it needs to get to my engine gas bar where my fuel injectors go is my gas bar getting enough gas for my injectors to push for it to start cuz if I spray my starting fluid in my auto body it starts right up for a few seconds so I'm stuck to find out if it's at my fuel pressure regulator my fuel rail pressure sensor or my fuel injector pressure regulator I have so many questions so as of right now I'm not getting any gas shoots out of my fuel line but it just ain't starting and I'm thinking I'm not getting enough gaswhile I'm trying to start it and turning Mikey and kicking my engine over its sputtering but it ain't starting so that's where I'm at right now for some reason I'm just not getting any gas
Brother check the fuel pump
حسنا عزيزي هل هذا جهاز التشخيص افضل من لانش وأوتل. .. هل تنصحني بشراء هذا الجهاز
I got pc0087 and p0192, after fixing some wirings the problem of jerking at high speed and engine stalling is gone. But now the pickup is low on uphill driving till it reaches 1500 rpm, once beyond 1500 rpm the pickup is good in my diesel ecosport 2018 modal. Any idea if this is due to faulty pressure sensor ?
Brother you can check the fuel pump pressure
Hi i have Mazda 3 1.6 diesel 2010 I got P0087-21 and P2002-21 and I’m having stalling before and that’s automatically gone and some times I feel small jerking when the car idle but very less and random . Now I’m feeling pickup is too low and I can’t even drive uphill properly performance and fuel efficiency too low . Can you please explain what’s the issue ?
Sir which sccaner you using
This is thinktool scanner brother
I desconet it and still the same so then is the fuel pump ?
Sir you can remove the fuel relay then disconnect the fuel pipe from the high pressure.. take a used fuel pump if you have of any car which is good working and directly connect a pipe to that and connect it with the high pressure and dip the fuel pump in a can full of petrol and connet the wires to the battery start the car if the car is good then change the fuel pump..
No i don't have an other car and the code i have is olso P0087
Q English jhad rha hai Bhai Tom phde ho dosre thodi me subscribe Kark unsubscribe kardiya Bhai tomhari English sonkar Hindi me bolo sabko samjhega
You're replacing the WHOLE HPFP. It's not just a sensor like is said in the video.
In "How To" videos, you actually need to show "How to Do it". If it is just informative, then show a picture, say a few words and be done. Otherwise, it doesn't help anyone.
@@MegaHollywood1971 i will take care of that my brother thank you