1-Phase Buck/Boost Step-Up Indoor Transformer - 208V Primary - 240V Secondary - 23.4 Amps - 50/60Hz

1-Phase Buck/Boost Step-Up Indoor Transformer - 208V Primary - 240V Secondary - 23.4 Amps - 50/60Hz - NEMA 12
www.larsonelec...
The MT-BBT-208V-240V-23.4A-N12 single phase step-up Buck and Boost Transformer from Larson Electronics is powerful, reliable,and designed with the environment in mind. Suitable for indoor applications, the MT-BBT-208V-240V-23.4A-N12 provides increased reliability, higher efficiency, protection against critical equipment failures and an extra level of protection by isolating the power source from the connected device. The lower operating costs, lower heat emissions and lower cost of ownership make this transformer ideal for a wide range of applications and businesses.
Transformer Features: The MT-BBT-208V-240V-23.4A-N12 buck and boost transformer is a single phase unit with a 5.53 KVA rating and a primary voltage of 208 AC using a maximum of 26.6 amps on the primary side. This step-up transformer has a secondary voltage of 240 and provides up to 23.4 amps available on the secondary side. Featuring robust construction, this unit`s cores are manufactured with non-aging, cold-rolled silicon steel laminations using state of the art technology.
This unit boasts a low cost of ownership and is highly energy efficient. Lower heat emissions mean less cooling is needed as well. The NEMA 12 painted steel enclosure provides protection from exposure to electrical parts, protection from falling dusts, and makes the unit suitable for indoor applications. This step-up transformer can be wall mounted. The MT-BBT-208V-240V-23.4A-N12 features a 130°C insulation with a 80°C temperature rise and is rated IP52.
Construction: The copper winding in the MT-BBT-208V-240V-23.4A-N12 are formed from high quaility magnetic copper wire help to improve performance. The close tolerances used during manufacturing also eliminates burrs which hinder performance. Each core is specially coated to prevent the ingress of moisture and are electrically balanced to minimize axial forces during short circuit situations. Buck and boost transformers are designed to maximize the performance and life of electrical equipment. The MT-BBT-208V-240V-23.4A-N12 is encapsulated in silica sand and resin, and cased in a NEMA 12 steel enclosure. NEMA 4, NEMA 4X, and NEMA 3R enclosures are available upon request.
Benefits: The MT-BBT-208V-240V-23.4A-N12 buck/boost step-up transformer offers many benefits to the consumer. Buck/boost transformers pass the majority of the load voltage directly through the transformer, only transforming a small percentage of the load. Due to this technology, a smaller and quieter step-up transformer is manufacturered and uses less materials. This provides owners with significant energy savings as well as offering environmental benefits.
Higher efficiency not only extends the life of the transformer, but also turn into cost savings for owners in the form of lower energy bills and decreased cost of ownership. Installation and maintenance costs are reduced due to the smaller form factor, and less overall space requiorments are decreased. In addition, these step-up transformers operate quieter than a standard autotransformer of the same capacity.
Installation: Installation is simple. Connect the primary leads and secondary leads to the step-up transformer per the provided wiring diagram. Knockout hubs on either side and the bottom of the transformer allow for easy line-in and line-out wiring. The front access cover provides convenient .
Applications: Air conditioners, lighting systems, heating elements, motor applications and other applications that that require the ability to power loads that differ from the available line voltage.
Limitations: While there are many benefits to a buck/boost transformer, there are some limitations to consider. This transformer will only transformer voltage, it will not convert phases, it will not create even legs between line 1 and line 2 (L1 and L2 WILL be UNEVEN), has no circuit isolation, and does not create a neutral for applications where a neutral is not already present. If any of these limitations apply to you, you will need a standard transformer. Please see below link for our standard line of industrial transformers or our line of phase converters.
Larson Electronics is a manufacturer and as such can build stationary and portable transformer systems to your specifications. Although we carry several models of power distribution transformer systems, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 1-800-240-2508 or [e-mail] to discuss your specific requirements.