I have the same year and model and also have had the relay issue. I thought at first it was the solenode for the starter. I replaced that and still had the same issue. started tapping around by the relays and it would start up. Worked good till this summer then started doing it again. so I took out the relay and looked at the number of it. there is two starter relays in that box. I think my issue is with the aux starter relay #1. it came out real hard where the other relays came out pretty normal. all the other relays look to have the same model number so all the same relays. So I took out the high beam relay and put it in aux starter #1 and put the aux starter #1 relay in the high beam one (just switched them). everything is working fine and no starter issues so far and the high beam works, I am planning on getting some extra relays to put in the glove box just in case. But I also read that some people had problems with that relay box. maybe loose connection under the box itself. Or cold solder joint that broke? I will check that out next time if I have the issue again. But at least we seem to all agree the issue is in that area so should be an easy fix. I also have the same windshield as you too (go figure lol). We leave the top half on and take off the lower half. the air flows right in and keeps you cool. Give that a try. I see yours in the video was opposite.
i noticed my relay is "stuck " too where all the others come out easy. ive just been dealing with the problem, but this weekend im going to finally change the realy. seems like you and i are on the exact same paths! lol thanks for watching
We have one and it had the same non starting issue. After our dealer couldn’t fix it we tried another dealer and he told us it’s a common issue that is an earthing issue on the relay. Issue fixed now.
very simple fix for the relay. The relay is getting stuck and by tapping it you are making it free. Every time you turn the key two connections touch sending power to the starter inside the relay (completing the circuit). Its a bad relay just replace the relay because one day it wont break loose. I would recommend removing the relay and taking it to an auto parts store. it will be much cheaper that the dealership!
Check your intake tube on the back of the air box. Mine was crushing flat and starving for air. I stuck a piece of scrap pvc in the rubber tube and now it breathes properly.
@@Horn_n_Fin_Outdoors i have the Cforce 2020 600T and was wantint a uforce and not sure witch one and dont see much on the U force 800 but also like the new U force 600 i dont want to have to buy a new trailer since i just got a new 5x8 last year
Thanks for watching! I don’t think it will fit on a 5x8. I’ve got it on a 5.5x10, and I’ve got a couple inches on each side, BUT, only about 6” front to back with the ramp up. So, I don’t think 5x8 will work. Good luck with the Buggie! It’s fun!
totally incorrect! im only selling the CF moto because im selling the property i use it on, and the buyer wants to buy the SxS. Since im selling the property, i dont have a use for it anymore. it was a great buggy and it served my needs perfectly
i wish i was an actor, then maybe i would be getting paid. no actors. no commercial. it was my opinion on a product that i purchased with my own money, and have no incentive to lie about
I have the same year and model and also have had the relay issue. I thought at first it was the solenode for the starter. I replaced that and still had the same issue. started tapping around by the relays and it would start up. Worked good till this summer then started doing it again. so I took out the relay and looked at the number of it. there is two starter relays in that box. I think my issue is with the aux starter relay #1. it came out real hard where the other relays came out pretty normal. all the other relays look to have the same model number so all the same relays. So I took out the high beam relay and put it in aux starter #1 and put the aux starter #1 relay in the high beam one (just switched them). everything is working fine and no starter issues so far and the high beam works, I am planning on getting some extra relays to put in the glove box just in case. But I also read that some people had problems with that relay box. maybe loose connection under the box itself. Or cold solder joint that broke? I will check that out next time if I have the issue again. But at least we seem to all agree the issue is in that area so should be an easy fix.
I also have the same windshield as you too (go figure lol). We leave the top half on and take off the lower half. the air flows right in and keeps you cool. Give that a try. I see yours in the video was opposite.
i noticed my relay is "stuck " too where all the others come out easy. ive just been dealing with the problem, but this weekend im going to finally change the realy. seems like you and i are on the exact same paths! lol thanks for watching
Great video!
Thank you! And thanks for watching!
We have one and it had the same non starting issue. After our dealer couldn’t fix it we tried another dealer and he told us it’s a common issue that is an earthing issue on the relay. Issue fixed now.
What did they do to permanently fix it? Just replace the relay?
@@Horn_n_Fin_Outdoors it’s that the relay circuit doesn’t earth well. I’d have to take a few pics next time I’m at our weekender for you
@@australianlawnfanatics3535 that would
He great! Thank you
Would you share how they fixed it in case my unit develops the same problem?
very simple fix for the relay. The relay is getting stuck and by tapping it you are making it free. Every time you turn the key two connections touch sending power to the starter inside the relay (completing the circuit). Its a bad relay just replace the relay because one day it wont break loose. I would recommend removing the relay and taking it to an auto parts store. it will be much cheaper that the dealership!
yes, thank you! i have already researched the new relay and i will be replacing it in the spring for approx $30
@@Horn_n_Fin_Outdoorsrelays are relays. Match voltage and type at any auto parts store.
Thanks for all of the info!
You bet!
Check your intake tube on the back of the air box. Mine was crushing flat and starving for air. I stuck a piece of scrap pvc in the rubber tube and now it breathes properly.
great! thanks for the advice
Can the U-Force 800 be bought in the USA?
heck yes. there are dealerships all over. i bought mine in CT
I have a 2022. I really like it but the relay thing has not reared it's ugly head yet
that's good! fortunately, it hasnt been giving me problems lately. good luck with yours, and thanks for watching!
try watching Real Talk Powersports and Main st cycle they have clutch kits to help out with the jerky ness
good info! thanks for the tip
@@Horn_n_Fin_Outdoors i have the Cforce 2020 600T and was wantint a uforce and not sure witch one and dont see much on the U force 800 but also like the new U force 600 i dont want to have to buy a new trailer since i just got a new 5x8 last year
Awesome video! I'm thinking seriously about getting the same one you have. Will this fit on a 5' x 8' utility trailer? Thanks again for a great video!
Thanks for watching! I don’t think it will fit on a 5x8. I’ve got it on a 5.5x10, and I’ve got a couple inches on each side, BUT, only about 6” front to back with the ramp up. So, I don’t think 5x8 will work.
Good luck with the Buggie! It’s fun!
@@Horn_n_Fin_Outdoors Thanks for the response! Guess I'll be buying a bigger utility trailer.
What part of CT. I’m in the northwest corner
Seriously take a long test drive
It gets so hot you can’t stay driving very long
@@robertleisten9868 Thanks for the advice. I'll check that out!
What type of warranty does it have
the standard warranty is only 90 days, but they offer a 72 month extended warranty
it has a 90 day on belt tires brakes and battery everything else is 1 year in USA.
Blows air so hot onto the passengers you can’t stand to drive it more than a few minutes
yes.... it certainly does. wish they would fix that
Hello, Are you interested in testing products? We would like to invite you to test the overhead gun rack for your CF Moto Uforce 800
thank you so much for the offer, however, i will be selling my side by side soon.
Thanks for letting me know.@@Horn_n_Fin_Outdoors
@@Horn_n_Fin_Outdoorsi take it you aren't enjoying it as much since the video was made?
totally incorrect! im only selling the CF moto because im selling the property i use it on, and the buyer wants to buy the SxS. Since im selling the property, i dont have a use for it anymore. it was a great buggy and it served my needs perfectly
It's an actor and commercial really
i wish i was an actor, then maybe i would be getting paid. no actors. no commercial. it was my opinion on a product that i purchased with my own money, and have no incentive to lie about