426 RSW 1920's Wurlitzer Banjo Mandolin
Vložit
- čas přidán 21. 08. 2024
- Sometimes the little instruments can deal the biggest fits when it comes to setup. I think you will enjoy a look at a creative way to make wood stop splitting.
Support: / rosastringworks
Website: www.rosastring...
What a FANTASTIC trade to hand down! The knowledge required to be a Luthier is great. Mechanics, wood working, and stringed instrument design and traditions. What a wonderful thing to witness, watching a young person grow into a trade that can only be handed down by an expert. It's an centuries old art form. I'm a singer and a drummer, I love music and have for over 45 years. I have heard $80 guitars and $8.000 guitars. The difference is incredible. Handmade stringed instruments are worth every penny.
I'm very pleased to see you're passing on your hard learned knowledge to another generation. Good on you
Ah the roaring 20s, wow that thing was over 30 years old before i was born and thanks to you folks it will be around 30 after i'm gone. Another fine job, well done and thanks for allowing us to see it.
I have a Wyman Banjo Mandolin from about the same era. It was in pieces when I got it and needs some repair. I was glad to see how they go back together. Thanks for the video.
I'm sure Caleb will have learned a lot watching the master at work, it's really hard sometimes to sit back and watch but that's the way it goes every now and then, Great work from the two of you very educational and enjoyable thank you.
❤ Happy New Year in anticipation! 🎉❤😍🙏 Thank you for being you 🎉❤😍🙏
If you look at 20:11 you'll see that the metal pin in the neck brace has not been pushed all the way through which is why he had to tighten the screw down so far. There's another shot at 28:11 where you can see it clearly. This is a very helpful video and my thanks to Rosa String Works for posting it.
"I don't let stuff like that stop me....." Words to live by. You go, Jerry.
@Rad Derry nice
Jerry & Kaylib that was a very interesting video i enjoyed it very much thank you
Guys I wasn't sure what it was but I'm 20 and I'm so glad I seen this I love this channel all of you keep it up
I must say since watching your videos I have been educated in the myriads of instruments that have been constructed from a man/woman's bran design. A six string banjo (guitjo) or a banjo mandolin (mandajo or bandolin) Never ceases to amaze me. Thanks for the video. Maybe you and Caleb can get into wrestling..... a tag team.
Fantastic Jerry & Caleb! This is almost exactly the repair I need to do on my 1920's Beltone Banjo Mandolin. The neck angle is way off, and so the action is super high. It's been waiting for me to figure out how to safely reset the neck, and you just did it. And Now I know to check the diameter of the drum for distortion as well. Thanks!!!
Brilliant, skilled workmanship, rarely seen nowadays, thanks, Davy
I stumbled across your channel a while back and watched several of your videos before you brought Caleb on board. He's a natural, I hope he knows that we enjoy his work and commentary and look forward to seeing him grow as a luthier.
Caleb is doing a great job. I watch a lot of his videos.
Have done a bunch of these time sinks over the years. They seldom warrant the time invested in them to play and work well unless they allow someone to play music.good job !
I don't know how CZcams's algorithm got me here but EXCELLENT work .. subscribed!
Love the toothpick fix. I've used it for years fixing loose door hinge screws !!
What a lovely little instrument. You both took good care of it and it doesn't sound bad at all. Never seen a banjo-mando before. Loved how you (Jerry) solved that rod thing. I was thinking ahead while watching and you pretty much did what i was thinking should be done. Great video guys, thanks!
Thanks Jerry and Caleb!
Great to see the Master and Pupil working on the same instrument.
Another good result in the end too!
Thanks for posting.
Great video Jerry!!!!!!! As a 27 yr veteran of playing & working on banjos, I can say without a doubt, they are always harder than they should be (dow rod banjos being the worst) & causing way too much thinking, but I still love em!!!!!!!
Bravo!! Enjoy the collaboration to bring another old one back!!
That cross grain shoulder solution was clever. It took me a minute or two to understand it. The first thing that I thought of was a ferrule, but your approach was much easier and better.
Great video, gents. Both of you made this old banjolin happy. These are worthy of preservation.
Man oh man this guy does some amazing work!! I just watched a vide from 11 months ago of jerry reconstructing an old French violin that got crushed in a residential move……looked amazing!! This thing was in prices and you really had to look to see any repairs and they were many and large!!!! Jerry is a master for sure!! Builds beautiful acoustics too!!
Hope things are going good for you man!! I know you were going through some bullshit at the moment and I hope ya come out on top man!!
Hi Jerry that was a great repair. I had a similar repair I ended up drilling a 6mmx 50mm hole in the square dowel and inserting a rosewood dowel with Titebond predrilled it for the endpin screw and it it worked a treat 👍
For your marking, drilling issue...
Some neodymium magnets should do the trick.
Just tape or lightly glue a magnet on your mark ( or just hold it there with fingers).
I've used this technique on plywood and it works great.
Thank you for the great insight into how to tackle a repair like this.
The info is much appreciated!
Cheers!
A really nice collaboration effort! The banjolin of that age is absolutely a tricky lil beast to work on. Built long before “rule-books” were written on em. This vid was more informative than some could realize -Thank You guys! 👍🏻👍🏻
Good work and good narration, young man. You have a bright future in video. Learn from the best.
Jerry and Caleb, I really appreciate the fact that play-ability is the aim of your work. That's not to say that what you do leaves beauty by the wayside. The fact is that in restoring instruments to playable, or more playable, condition you are restoring their purpose. If an instrument isn't playable it ceases to be an instrument at all and becomes or remains merely an object. Who cares if every part on the thing isn't exactly what came off the factory floor? Folks put new tires on "restored" cars.
The best thing RSW has produced to date is Caleb.
That was a good job you's two. It was very entertaining to watch as well. I just love watching those real difficult jobs.
Had a similar repair done on this banjo I bought. Had no idea it was this intricate, but it works like a charm!
Great teamwork - good comms meant the handover point was opportune. Lovely sound - really punchy :-)
Great job. It looks like one of the more difficult jobs that came across your workshop there but you handled it well. If I ever have some old vintage instrument that needs work, I'll send it to you.
Excellent work Jerry & Caleb ! I wouldn't want to tell you how to do this job..... and no thumbs down from me !! Love & look forward to your vids guys . Thanks bunches !
Write Me A Letter... got that high mountain sound
In the immortal words of Gilda Radner, "It's always something." Nice job. Thanks for the tips, and thumbs up to crush a troll.
Big ups to Gilda!!
I really like the sound of that banjolin.
That birdseye shell is lovely. It would make a great snare drum.
Great work, that's the way we fixed hinges when the screws got loose...Cool, Banjoline
I have used a slot in place of the hole in the pot so the neck angle becomes adjustable and that has worked. I needed to make my own brass washer so it looked prettier. I wasn’t worried about maintaining the original aesthetic. I also added a barrel nut (cross dowel) to screw into the dowel stick. Still very carefully as it was easy to distort the cheap pot.
Wow that was excellent.... how timely this was for me.... it's amazing how it happens.... I just picked up an old May Bell 4 string banjo... it's been well loved and played... a lot... it requires some love... and the tips you offered here will more than likely get me into a hole lot of trouble.... but such is life....so I'm not going to let stuff like that stop me.... and watch this video a million time as I go along....BJ.
I too have a May Bell plectrum banjo with the same construction and action that is way too high to play beyond the first position. Unfortunately, mine has a massive metal tone ring right where I would need to drill through the outer shell. I may be able to get some relief by drilling a new hole at the end of the dowel. It does have a resonator, so any mistakes I might make won't show!
great to see one generation passing on their knowledge to the next generation and even greater to see is the next generation taking in that knowledge i have learnt allot about stringed instruments from watching your videos and no doubt caleb has learnt more from you than about instruments but about life i am sure caleb will do well in life as he is willing to learn and has an excellent teacher people will always want these old instruments fixed or restored and there arent many people around that do the kind of work you do i think i have watched every video you have posted and i a looking forward to more post by you and by caleb
Caleb looks like he's 12 and 25 years old at the same time.
Yeah, I'm always bummed when I don't find a map to buried treasure too. Hardly makes it worth taking things apart, sometimes.
Awesome video Jerry as always! Very interesting and genious way of inlaying the pieces of cross grain wood on the end of the banjo post. Just that technique alone blew my mind no joke 😀
Ricobass0 Yes that is a good observation and good logic. Here’s how I see it: (keep in mind I’m not a luthier/expert/guitar repair person just expressing an opinion)
Ricobass0: your solution would probably save the customer some money as your method would take less time because of the omission of the routing. In terms of aesthetics it may not look pleasing because the inlays are sticking up proud from the post (but you do express a good point in that obviously it will not be looked at that often because it’s in the back). As well The pressure of the banjo ring butting up against the end of the post might “push” The inlays loose because of all the pressure (i’m just assuming this might happen.... maybe you could provide a rebuttal).
Jerry rosa’s technique: would probably cost the customer more in bench time because of the time it takes to route the post. But it looks aesthetically pleasing and I think each inlay has a “shallow ledge” created by the routing to buttup against in case the pressure from the connection between the inside of the banjo ring to the end of the post increases.
In the end I think Jerry would have the best say in this matter. Again I don’t mean to offend anyone and I don’t mean to sound like a corksniffer but I’m just very interested in Guitars/luthier work. I’m a guitar geek and I like to geek around with this kind of stuff 😀😀 both your techniques I think do the job and are logical. Ha!!! I learned from both Ricobass0 and Jerry BONUS LESSONS!!!
take care everyone!
Great video! Funny and a really cool instrument.
Well Jerry, no doubt Caleb learned lots from that one. Good call. A banjo-mandolin is a creature of purgatory, where as they play mandolins in heaven and banjos in hell. LOL But you manage to fix just about anything they throw at you. If some one would put strings on a giraffe neck, you would fix that too.
Great work, Caleb... glad things are working out for you
A piece of aluminum square tubing slipped over the end would keep it from splitting... Always enjoy your videos.
Papa ... good from an engineering stand point but doing old instruments usually requires a touch of old school. IOW, staying with wood. OTOH, the same idea in brass or chrome might have been spiffy! (and not looked like a new repair)
absolutely, a piece of square metal tubing the length of screw with the wood routed appropriately to receive it.
Thanks for that. Good video!
The repair/set up turned out good in the end. There are many ways to skin that cat,
but not as many when it comes to a reasonable price. Good job both.
We love you guys.
Nice job both!
Great! If it was too easy you wouldn't have any fun. Great job both of you! Thanks for sharing!
(watches Jerry rout the end of the post and then build a box around it) 😲 This is why I'm not a luthier. That's some TALENT, man!
I have a mandolin Banjo as a work in progress, there was a piece of brush handle in there as a Co-ordinator rod, i think i'm going to drill out the base of the neck and cross drill to hold a brass rod in place to give some adjustability. yours comes across loud and clear - Stay safe.
Another interesting hybrid instrument team effort. Way to go guys. Thanks !!!
Great work, problem solving mode and all your experience!
Neat instrument there, and thanks again so much for demonstrating your problem solving approach.
Good job guys..
I'd have definitely written something on that piece of card!
Well done
Hope you both are doing well and making a good team. Blessings to you both.
You and Caleb did a fine job, and that thing has a really interesting sound!
You do real nice work
Your helper is learning from the best. :)
A Colab with Caleb, A new way of putting it all together, Well done-
Oh please, the banjolin sounds fan-frikkin-tastic. Also your apprentice' nods to detail are awesome - like the lubing of the peg gears. Good show. My Silvertone sounds like your The Gibson from a hunnert years ago. Wood ages and changes in unpredictable ways. I have re-built/restored/fixed half of my guitars simply due to RSW. Keep on truckin'.
Just cool to watch
Thanks for the insight into these early instrument systems. I've got a tenor banjo and a biscuit bridge resonator guitar with the same problems.
You could also use a dowel at the end of the peg with a needle pin to mark the inside hole exact.
very nice repair !!!Ijust refretted and cleaned up a banjolele luckily for me it had a steel rod instead of wooden thanks for posting ,I have a old banjo that is very simular to this 1 thank god its my personal wallhanger lol
Thanks for the video!
Hi Jerry, I've watched and enjoyed many of your videos for a few years now and although I have an engineering background I am certainly no Luthier. But I think I know a quicker and better fix for the brace inside this instrument and that is to use a "Barrel nut" fixing (they're available in different sizes). Where you cross drill the brace and fit the barrel nut and a new Allen key bolt would pass inside the brace in the same position as the original screw.
I think you may know what a barrel nut is but if not a quick Google will show you.
Then you could put as much torque on the brace without risk of it splitting.
This is by no means a criticisms but sometimes a fresh pair of eyes can see things from a different perspective. Anyway this info may be useful for future repairs.
Keep up the good work and keep the vid's coming.
Brenda from Cornwall UK
Jerry you’re the best!!
Good job!
Caleb.....you stick with Jerry and you will be THE man. Luthier extrodinaire running your own custom shop.
you would think they would have used 2 coordinator rods like most banjos have inside the pot, all kinds of adjustments with them. great work on keeping it original.
That is one of prettiest banjolins I have seen.
I used to have the Washburn version of one of these, and I sold it years ago. It sounded OK, but they were miserable to tune, and to keep them tuned.(as you mentioned near the end)😉 Where you routed out for the 'cross pieces' in the end of that dowel, it might have been better to wrap it in thin piano wire rather than more wood. It would have looked nice and it would never split out if you drilled the end fairly large and glued in a new hardwood dowel for redrilling. Anyway, it still came out nice, and Caleb did a great job refretting the neck and getting the final setup lined out. Looks like you've got yourself a pretty good assistant there!😁👍
I was thinking the same about putting something on the end of that rod, but my solution was maybe an aluminum ring hammered to shape.... Mine is rough and ready, yours is elegant!
Caleb in the house!
Here's an expert tip. Anytime you are going to use a screw to pull something and it will remain under tension, install an oversized threaded blind nut in the wood, and use a bolt thread to pull. Never use a wood screw for pulling stuff together. I also replace wood screws with sheet metal screws when the hole seems to be loose. Sheet metal screws have wider thread to shank ratio and will grip the wood better than a wood screw does.
Been there done that many times. The method I use is the traditional method and it keeps the instrument more traditional or more like it was from the factory.
@@RosaStringWorks The methods I described would be completely hidden from view. It would still look exactly like original, but be stronger and not have to go back to the shop in a few years for the same repair.
Cross drilling from 90 degrees will also work. Some player piano companies did this to put grain at right angle to screw in pneumatics.
The reason why the neck split was because of too much glue. when you bottomed out the screw, you trapped extra liquid, causing to to go somewhere. So it forced its way out the sides when it had no where to go. if you just cover the tooth picks in glue, then put the screw in most of the way, let it dry, then fully seat it, it works much better. You can also had add a clamp while its being screwed in to try to prevent blowout.
i dunno anything about banjos at all, but i liked this guy so much i just subbed anyways, lol
Hi Rosa String Works, screws into end grain are never a good idea. So I thought , drill and glue 1 or 2 little dowels across the grain of that square bar inside the banjo body. Then the screw would have some side grain to bite into. Maybe? What an interesting job you have!
Those two cherries chisels are worth their weight in gold
Most of the neck dowel banjos that I have seen have a brass square tube around the neck dowel on the end to keep the screw from splitting the dowel. Stew Mac sells a set with the metal parts you see on the other end.
Angelina Baker! I have a similar banjolin from the early 1920s, with what may turn out to have similar issues, so this has been great to see! Time to do some measuring up and sizing up, because the high action definitely does keep me from using it as often as I'd like.
I find that the punchy, crackily sound of this instrument is a nice alternative sometimes, more effective for single note playing than chording. I especially like it for Celtic tunes, because unlike the ones I've tried with smaller sized pots, it cuts through nicely during noisy Irish sessions. Also, the looks of it really project a certain cute little spunk, playing the part of a little clunky baby banjar that's trying to bang away as loud as the big boys in the room.
(Have you ever thought of reinforcing a tight hole like that with a helicoil insert? A long time ago, I worked in a machine shop for a year or so, and those things would often save the day when we really wanted to torc things up without having everything start splitting up or popping out of a delicate material. Your crossgrain shore-up was brilliant, however, and there is indeed something to be said about sticking to traditional materials on these old gems.)
Nice video. I wish that someone would have played it before and after the repair to compare the difference.
There is probably very little difference in the sound the difference was in the playability it was unplayable before
"...things creep 'n' change 'n' move, y'know..." - yup.
thanks i enjoyed that
Your Wurlitzer banjo mandolin was actually manufactured by Slingerland!
Awesome instument, first time I see one...🌹🐱🐉✨🎶🐱🚀🐱👤🐱👓🐱💻🐱🏍
Jerry’s got the map to buried treasure!!!
⭐️⭐️⭐️⭐️⭐️ Fascinating
It's not easy being me
but it's funny watching people try
I want to learn to play bass guitar and I want to learn how to fix these things (yeah I can play piano and I have rebuilt and tuned them! oh my god so much work!!!) I am going to get a Soviet Tonika bass guitar and I hope if it has any major issues I'll be able to fix it with the help of your videos, this HAS to be easier than rebuilding a PIANO!! I love what you do so much and I learn from you and please don't ever try to rebuild a piano unless you are insane and instrument crazy just don't do it...but if you do and get it nice it is phenomenal if it's an old piano...
My standard line to everyone is "I repair all string instruments smaller than a piano"
@@RosaStringWorks Yup! I will definitely get that Bass guitar that I want and if it's wonky I will look at your videos on how to repair it or email you for advice! Fixing a guitar should be small potatoes versus a piano lol.