Peak Design Clutch Hand Strap: Setup + Tips
Vložit
- čas přidán 6. 07. 2024
- You can buy the Clutch here - www.peakdesign.com/products/c...
Meet the mighty Clutch hand strap by Peak Design. It's the world’s first camera hand strap that is quick-connecting and quick-adjusting. Clutch gives you access to your camera’s controls and quickly cinches down for a super secure grip assist when it's go time. Hypalon exterior and lined with a comfy and wicking microfiber pad. The aluminum adjuster hardware is ultra-durable and inspired by high-end climbing gear. It attaches to your camera at 2 points: your camera strap mount (via a reinforced Hypalon loop) and your camera tripod mount (via our low-profile Arca-compatible Standard Plate). Clutch can be used alongside other Peak Design straps, as well as the Capture Camera Clip.
00:25 - The Overview. What is it, what comes with it?
01:14 - Let's talk installation.
03:39 - Taking Clutch off the camera (it's easy).
03:50 - The Clutch carry modes.
04:40 - Loosen. Fiddle. Shoot.
05:45 - Going deeper. Clutch on various kinds of camera. Battery grips, mirrorless.
08:50 - Clutch + L Brackets = yes.
09:10 - Clutch compatibility with the rest of the PD ecosystem.
11:22 - Clutch + Tripod? Killer combo.
12:10 - Conclusion. It's a buy. - Zábava
![Next-Level Camera Carry: Peak Design Capture Clip v3 vs v2 + Pro Pad [2023]](http://i.ytimg.com/vi/Bn8LVyAfMMA/mqdefault.jpg)
I liked how you showed that the clutch isn't perfect for every camera out there. To me that shows honesty and because of that I can trust that the information you're giving me is accurate.
and 2 years later now, they have released the micro Clutch, specifally for those smaller cameras
"NICE". I could listen to this dude give me instructions all day , so chill 😂
Amazing you get me to watch a 13 minute video all talking about a hand strap.
(I love the clutch btw)
Thanks for showing the X-T4 compatibility issue. It shows a lot about your company and that you care about your customers. Great stuff!
Indeed! I just purchased the xt4 and went looking for a handstrap. Peak design was the way to go with my canon dslr’s using the capture clip for those in combination with the canon handstrap and it works like a charm. Very difficult to find a solution that doesn’t bulk up the body and give a secure grip for the Fuji. :(
I got it on my XT4 when I first got the camera. it is handy for carrying but yeah shooting it is awkward positioning for shutter button but I've used it as such loosened up. it's not perfect though for the XT4 that's for sure. I only saw this video today after over a year owning both! haha..
hey @@funkyboogiee I just got my x-t4, would you still suggest to buy this or have any alternative to look at? I like the PD quality, just bit pricy.. thanks
@@riccardomirto its good for carrying but akward for shooting positioning on xt4. Had i known before buying i wouldn't have gotten this clutch
I have got too many of your products.
They are all great.
Just give us a cool double strap for 2 cameras and take my money.
I love this video!! Never expected this for a camera strap video! Genuine, humorous, irreverent and told me everything I need to know about the Clutch hand strap! That "genuine" approach brought me in! Great Marketing piece! Congrats and thanks!
Great strap and demonstration. The whole "Loosen, Fiddle, Shoot... Tighten" part made me super relaxed like an ASMR video lol
When I’m not using the PD slide camera strap I use this. So useful especially when your lens isn’t so heavy.
Just received mine in the mail, and I love it! Finally, I can have some sense of security without my gear swinging from my neck. Great strap!
Owner of an X-T4 here; This is an awesome grip but yes! It does feel funky and when using it I only have 3 fingers within since the other works with the capture button.
I still think I will stick with it though since it does feel nice when shooting with it :)
F-ing LOVE YOUR STUFF!!
Best Engineering, Best Eco-system, and most importantly - best Customer Service!!
You guys ROCK! Absolutely AMAZING!
Thank you for the informative video. Just installed clutch on my Sony A7R3. Works just fine.
Peak Design sent me a replacement for free. Really appreciate it
Thank you so much for this video! I bought a used Clutch months ago but couldn't figure out how to attach it-which I'm almost embarrassed to admit since I'm usually very good at figuring out mechanical things and assembling stuff even without instructions! Now that I see how it works, I like the feel of the strap when handling my Canon R7 that I think I'm going to order one for my R5 too!
lol I love the Canadian accent that came out when under "fear". Great video, ordered the fleet of straps and holsters so this helped a ton.
oh ya know, just shooting an amazing ad on the fly in the middle of a product demo. Well done.
I love the sense of humor since the first second 🤣
Good honest review.
Great video. I love it
I have a clutch on my Fuji GFX50S with battery grip. It fits comfortably with no issue. The PD Clutch provides me with added security and it looks good with it attached to the camera. It is perfect for the Fuji XT5 with the SmallRig cage attached. With the cage it is easier to attach and looks good, as well.
Using this with a Sony A7RIV and Meike MK-A9IIG grip - really excellent, improves handling of larger lenses significantly. Thanks guys and keep up the good work.
How tiny are your hands? With that grip on a Sony body I can barely press the shutter button, it’s not useable for me.
@@owlmostdead9492 Normal size hands! What camera are you shooting? I can’t see how the clutch wouldn’t fit even huge hands, as my hands are normal size and I have to tighten the clutch quite a bit to make it feel snug for me
@@boisvertphotography I think the main issue with Sony bodies is that the "ear"/ connection point is too low compared to the shutter button. I removed the PD strap and noticed that even without it my hand is right up against that metal connection point.. my pinky is also barely holding onto the grip and is almost falling off. I don't have that issue on bigger bodies, a battery grip might fix this issue for me.
Edit: I use a Sony a 7iv
@@owlmostdead9492 Ahhhhh yes, and yes I totally agree, the ergonomics of Sony cameras aren't great. I only ever use my A7RIV with the Meike MK-A9IIG grip I mentioned attached, as I find holding the camera without that grip attached to be pretty terrible, honestly. With that grip attached the clutch works great, in my experience!
@@boisvertphotography Yeah I totally missed the part where you mentioned you were also using a battery grip sorry. I'll probably get the original Sony grip since I don't want to un-weather seal my camera but I heard the Sony grip fits terribly to the Sony a 7iv.
You guys should really made that ad come true
Informative....and you made me laugh. 🙂I'll give it a try.
That's like a legit ad in the end, not bad.
I spent decades wrapping a wide neck strap around my hand to work this way.
But now i have an excuse to buy the travel tripod.
Perfect on my Fuji XH1 🤠
Works great with my OM-1 ii!
Just installed this on my Sony A7C so i can shoot handheld without fear of dropping it. It fits it perfectly for a small camera
would love to see something similar for my xt-4 :D
I actually ran a cuff and clutch in the wild yesterday lol. I was shooting rollers on the highway...
EOS R - this was too small for my hand even when loose to comfortably hit all the camera buttons. I just used the spare anchor on the top eyelet and ran the clutch strap through the anchor loop. The anchor is sandwiched between clutch strap and clutch knuckle pad. Fits me much better.
any progress on making clutch compatible with XT-4
I think that it would work for the Fuji x-h1?
What I think about that short ad for the ancors and ecosystem...?
It's magic
I love the clutch but personally don't like using the clutch on the Sony a7. It's a little restrictive cuz the eyelet is lower than a canon or nikon. However, when I use a cage system, the clutch is back on the camera!
Loosen Fiddle Shoot Tighten. Love it
my first Peak Design product - I would never been able to install without this video and then on pause to see postions of anchor, strap, etc. Secondly on my Canon 7D my thumb is resisted using back focus unless I loosen it completely Time will tell Thoughts?
Loosen, Fiddle, Shoot Tighten...got it!
Is there an adapter to get this to fit onto a standard tripod so I don't have to keep taking the plate on and off?
Can you add the clutch AND a strap anchor to the same eyelet? (Sony A7riv)
Everytime I see someone with the tabs on their camera outside, I give them the head nod lmao
Is there any news about the x-t4 compatibility?
Can I attach this to the Nikon Zf with the SmallRig grip?
Damn. I'm an X-T4 user and just got my PD clutch and found that its almost impossible to access the trigger with the clutch installed. I'll try and return for a strap.
Works with Fujifilm X-S10 just fine because of the grip.
When you loosen to shot do you still feel like there is a sturdy grip on the camera? I am always afraid of dropping my pricey gear and I wear my strap always. Is it possible it can slip out of your hand when loosened?
Thanks a lot for the good explanation. I was very disappointed with the product. The spring fell off almost immediately and when I tried to get it on again there were a lot of scratches in the metal buckle. I only bought it 2 hours ago. So.. people: take care of the spring :D
the one update I'd like to see made to clutch is having a quicker way to remove the tripod mount that doesn't include an Allen wrench. Or even just including an additional screw mount that can be easily unscrewed from the bottom of the camera so I can attach my different tripod mounts. I ended up just buying a screw mount from Amazon with a loop on it from Amazon for $5
I’m a hybrid snooter and I often take the camera from the gimbal to take photos the I mount it back in. With the current neck strap I can do that, but with this one that requires me to replace the gimbal bottom plate with its own it’s such a bummer that stops me from buying this hand strap. I already have the neck strap.
Hi.. Does it have a standard size? or does it vary which region it’s sold? I noticed that the tail in the video seems to be longer compared to what I just bought. Mine doesn’t extend as far as it did in the video and I don’t have big hands. 🤔
I wish this video was available much earlier when I bought the PD Clutch for my XT-20 back in 2017.
I was always a fan of a hand strap since the days I had an EOS-A2 (EOS 5 non-digital) and had nice grip strap with quick release (pulling on the strap buckle to release it) - back then OP//Tech pretty much ruled the roost locally. I bought the PD Clutch blindly because of this and ran into the same problem where the strap interfered with the shutter release button on top of the camera.
It's a real pity though as the PD system is nice - I still do use the PD Slide (Fujifilm branded) with my XT-20 that I got for a very nice price thanks to the local Fuji club.
Does anyone know what the buckle with spring is called?
So can the clutch be used on the canon r8?
Will this work with Canon R7 and the Capture Clip version 3?
I use the clutch on all my Sony mirrorless cameras, even the small ones like the a6000. Works great on all of them. Only issue I've had is that I use them so much, the straps are disintegrating lol
Thanks, this is helpful to know! I have an a6000 and am thinking of getting the regular clutch over the micro clutch because the regular would let me put my whole hand through it
I have this peak design clutch hand strap, but the standard plate is not compatible with my Manfrotto QR plate. I shoot on tripod also, so i need the flexibility to be able to mount the camera on the tripod and shoot handheld quickly, without having to switch out the standard plate.
I shoot exclusively with this and a small monopod when shooting big events.
How many times did he say eyelets and camera?
I wonder why they don't recommend the Cuff with smaller cameras. I love mine and use the Cuff even with my larger cameras. It's very versatile.
Any compatibility issues with GFX?
Will it work for small female hands? Be able to tighten it enough ?
I already asked support, but perhaps someone in the comments can help. Is there an option for using Clutch on the left hand? It doesn’t look the most ambidextrous, but I’d love a comfortable solution like Clutch that works for people who have to hold weight in their left hand
Works with my a7iii
In case anyone is ever wondering, the Clutch works with the Olympus OM-1 just fine, at least for my hands.
I’m considering one for my Panasonic G80, hood to know it fits on another m4/3 camera (unless you’re talking about the film om1)
@JimiCanRead I mean the digital OM-1. I checked the dimensions and the G80 is only a few mm smaller than the OM-1, so I imagine it will work on the G80 just fine. It's smaller bodies like the Olympus EM5 where it should likely not fit well.
@@arentol7 great thanks!
barely fits pocket 6k pro, but it does. no cage right now atleast.
So it’s either the hand strap or being able to use my tripod without fumbling around to remove a plate
WOW ...SECOND ....
Too bad doesn't work well with xpro series
The standard plate is too big for smaller mirrorless 'coz it can block the battery door, impeding battery changing (which mirrorless need to do more often).
you can use the smaller plate
@@robojimtv PD no longer makes the microplate, unfortunately.
@@DixonLu i think it still comes with things like the Slide Lite (mine did) but maybe it's not on sale on its own?
@@robojimtv The mini mounts that come with the Slide Lites are not Arca Swiss tripod mounts. Have to go into a time machine to find a PD Microplates that are Arca Swiss compatible (they were red).
LFST
When using your camera with the clutch, always remember to do LSD...I mean LFST.
First
Congratulations!! Oh my god, this must be life-changing for you! What are you going to do with your life now that you’ve peaked??
@@HoffVideos man I don’t
No pro tip -10 internet points.
I like Peak Design so much, but this product is not good, very uncomfortable. It is much better use an ordinary neoprene hand strap.