IMPORTANT CHANGING Hello I want to change the receiver into an FRSKY Receiver with telemetry. Is there anybody who can make a program for Mode2 OPEN TX for Horus? At Moment I have the settings for the channels and Mode SWITCH. But there are any other settings in the channels like Throttle 15% (49%) ??? What about 100% shown for Aux in the Monitor but in the AUX itself is +75 to -75 % or whatever. So is it possible to copy or build ALL SETTINGS for MODE2 OpenTx Horus 12s or Radiomaster TX16S
Außerdem ist es ab jetzt möglich den Flypro 300C mit anderen Sendern wie FRSKY Horus x12S, Taranis/X9D, Jumper, Radiomaster 16TS Hallgeber, Flywing TX, Turnigy und OPEN Tx zu fliegen. Das dürfte interessant sein für diejenigen die bereits eine solche Anlage haben und nicht mehr auf die Radiolink angewiesen zu sein. Dadurch ist es auch möglich Telemetrie zu verwenden. Alle Infos hierzu Email an Wutzeputz@t-online.de
Hi my name is Vincent and I live in the United States 🇺🇸. I recently purchased a JCZK 300C helicopter and I have been dying to get it in the air. Unfortunately, the entire operating manual is all in Chinese. I tried to follow all the start up procedures that I have seen on UTube but every time I get it to throttle up it shuts down and starts beeping. Do u know where I can find an English Operating Manual??? Or at least explain to me what on earth am I doing wrong? The last thing I want to do is crash it on its very first maiden flight. Can u also tell me if this helicopter needs to be calibrated and how do I go about it. Please help???? Thanks.
1. flight mode switch: Stabilize mode 2. battery on and push the red led flash light(power safety button) 3. wait the FC Gyro moudoul from blue to green light. 4. Switch the flight mode from stabilize to the GPS mode, then the green light will turn to blue light again, then wait it to search the satellite, be patient to wait few minutes to see it become green flash light again. (green led light rapidly flash: GPS signal very nice, green led light flash slow: GPS well. 5. Switch the flight mode to every position to make sure the green led flash light at every different mode. if yes, congratulation, the GPS signal is nice for You to take off. 6. then, please switch to the "GPS mode" step away from the helicopter keep safety distance. 7. Unlock --- push trouttle joy stick to right and down to end, until You hear the "Beep" sound, then switch the power on(must in 10seconds,otherwise it will auto lock again) 8. the hell will automatically running in 2seconds to its default rotor speed. 9. Wait for 8~10seconds for stable and smooth running, then, take off and enjoy the flight.
Hello, I want to know if the compass is already configured and can I use the GPS immediately?
Awesome....save a lot of money with this system.
IMPORTANT CHANGING
Hello I want to change the receiver into an FRSKY Receiver with telemetry. Is there anybody who can make a program for Mode2 OPEN TX for Horus? At Moment I have the settings for the channels and Mode SWITCH. But there are any other settings in the channels like Throttle 15% (49%) ??? What about 100% shown for Aux in the Monitor but in the AUX itself is +75 to -75 % or whatever.
So is it possible to copy or build ALL SETTINGS for MODE2 OpenTx Horus 12s or Radiomaster TX16S
Außerdem ist es ab jetzt möglich den Flypro 300C mit anderen Sendern wie FRSKY Horus x12S, Taranis/X9D, Jumper, Radiomaster 16TS Hallgeber, Flywing TX, Turnigy und OPEN Tx zu fliegen. Das dürfte interessant sein für diejenigen die bereits eine solche Anlage haben und nicht mehr auf die Radiolink angewiesen zu sein. Dadurch ist es auch möglich Telemetrie zu verwenden.
Alle Infos hierzu Email an Wutzeputz@t-online.de
Hi my name is Vincent and I live in the United States 🇺🇸. I recently purchased a JCZK 300C helicopter and I have been dying to get it in the air. Unfortunately, the entire operating manual is all in Chinese. I tried to follow all the start up procedures that I have seen on UTube but every time I get it to throttle up it shuts down and starts beeping. Do u know where I can find an English Operating Manual??? Or at least explain to me what on earth am I doing wrong? The last thing I want to do is crash it on its very first maiden flight. Can u also tell me if this helicopter needs to be calibrated and how do I go about it. Please help???? Thanks.
Put the manual through google translate
My Line ID: enforcetw
You can email me: enforcetw@gmail.com
1. flight mode switch: Stabilize mode
2. battery on and push the red led flash light(power safety button)
3. wait the FC Gyro moudoul from blue to green light.
4. Switch the flight mode from stabilize to the GPS mode,
then the green light will turn to blue light again, then wait it to search the satellite,
be patient to wait few minutes to see it become green flash light again.
(green led light rapidly flash: GPS signal very nice,
green led light flash slow: GPS well.
5. Switch the flight mode to every position to make sure the green led flash light at every different mode.
if yes, congratulation, the GPS signal is nice for You to take off.
6. then, please switch to the "GPS mode"
step away from the helicopter keep safety distance.
7. Unlock --- push trouttle joy stick to right and down to end, until You hear the "Beep" sound, then switch the power on(must in 10seconds,otherwise it will auto lock again)
8. the hell will automatically running in 2seconds to its default rotor speed.
9. Wait for 8~10seconds for stable and smooth running, then, take off and enjoy the flight.
Here is the full procedure:
czcams.com/video/nl2_RAHXGOk/video.html
1