Braindead Volkswagen!
Vložit
- čas přidán 23. 10. 2023
- In this video we diagnose a Volkswagen golf that is a start-stall, and a complete no-comm. How can we diagnose a vehicle if we can't use a scantool?
Enjoy the video!
Check out my website ; www.diagnosedan.com
For DDTSB visit DDTSB.COM
For the Topdon tool used in the video:
US:www.topdon.us/collections/pro...
UK: www.diagnosticconnections.co.uk/
EU: eu.topdon.com/products/phoeni...
For business inquiries ( not for technical questions); Diagnosedan@gmail.com - Auta a dopravní prostředky
Check out my website ; www.diagnosedan.com
For DDTSB visit DDTSB.COM
For the Topdon tool used in the video:
US:www.topdon.us/collections/pro...
UK: www.diagnosticconnections.co.uk/
EU: eu.topdon.com/products/phoeni...
Just get fault code 404 - Page not found for the topdon EU link
I have a autel maxisys elit. Is The topdon phoenix max a good upgrade compared to The autel? Best regards from sweden
Great video. I also get an error on US link
@@hamberg91it's similar, both very good tools
Are Volkswagen cars really that unreliable or is it just media bias?
Great to see someone doesn’t just go “oh, it’s a gateway module” and throw one in. It’s diagnosed thoroughly and properly. Great work.
No one wants to pay us to thoroughly and properly diagnose…therefore most who can have left the field
Especially in this case it easy to confirm the wiring.
@@andrewcimochowskii guess that really depends on the customer.
As an old bloke I appreciate your contortionist efforts to film under the dash for us. Thanks Dan.
you think you're old, I took my test in a series E Morris
@@mrgrumpy5116that's nothing. According to my kid, took mine on a T-Rex! 🤪
With you on that aussie.😅
Another Aussie agrees with you. After working on my car, even my aches have aches.
A comment like this makes it worth while. Thanks😁👍
Who doesn’t love a new diagnose Dan video! Very interesting, learn something new every day. Thanks Dan 👍😃
DD is a bossss!!
I learned never to buy a German car.
Thanks Simon!
car tried to crank itself.... does that make this episode the Halloween special? 😂😂😂
😂😂
@@arga1966 I had a Lexus that had a strange problem before. After I turned and removed the key, the engine would continue to run. The engine continued to run for another 2 or 3 minutes and then turned itself off. You would probably think that the key cylinder was bad and needed replacing. That was my first thought as well. But the problem continued after the key cylinder was replaced. Turned out that it was the car's ECU that was faulty. The replacement part was around $2800. Fortunately, the car was still under factory warranty at the time, so I didn't have to pay. It's still running great today, after almost 230,000 miles.
@@S_Paoli 😱thanks God it was under warranty mate.
That is expensive 😞
Exactly 😂
🤣🤣
A Volkswagen that cranks itself. No wonder, it's basically Herbie's great-great-grandson 😅
Great video again Dan! Good stuff
🤣🤣🤣
The in depth knowledge of electronics that Dan had it's amazing. This the guy that when everybody else tried and did not succeeded, is the one that will. My 2 cents. Thank you for sharing Dan.
A comment like this makes it worth while. Thanks for taking the time to watch my videos and leave a comment
Another fantastic video. It's clear why other shops send their problems to you - your outstanding diagnostic skills. Appreciate you bringing us along. Looking forward to the next video.
Thanks Frank 👍
I would like to greet Dan and thank him for his video from 2017 that solved my problem of difficult first engine start on 2.0 TDI passat B8,2014 year. According to his diagnosis, which he did at the time on golf VII, I replaced the VVT valve in an authorized vw repair shop (housing with solenoid and executive valve) and now the engine starts without problems. Even vw experts could not guarantee that the repair would work, but it worked. Many thanks for your great expertise. Greetings from Bosnia.
Thats great to hear!
Another really useful video, thanks Dan. I’ve built up an extensive collection of your videos in my “Saved” list, so if I get a problem, I simply go to this folder and search for your relevant video. It’s already becoming a comprehensive and invaluable library.
😎
Ha ha thats great!
I guessed right! Would be interesting to look at the wiring diagrams to see if a voltage spike (from damaged alternator) could scramble the gateway.
It could, but the gateway is not 12V. It's probably 3V3 or 5V. So a 50C voltage regulator is probably all it needs.
@@giusdbgTrue, the gateway is probably toast. And the electronic did have some voltage spikes and then faiiled. If the regulator failed, it would have burned the print.
Thanks for your interesting comment. I didn't think about that since the alternator was already replaced
@@Diagnosedan You nailed it right away, anyway! (that's why I'm here- to learn) I was just trying to think how the complaint came to be: what changed? accident; what happened in that accident? alternator was replaced. (you checked for water damage in the central gateway*; water damage messes up the electrical components; voltage spikes, from, perhaps, a compromised alternator, could also damage the electrical components) * I have an MB W211 car and I follow various issues with these cars and have discovered that water incursion, from poorly sealed windshields, result in failed/failing central gateways: fortunately I haven't had this issue.
Great one as usual. Common sense is key to a successful diagnosis 👍👍👍
Exactly!
The reason Dan is so successful is that he takes the time to DIAGNOSE the ISSUE and not just thumb suck to make a quick buck. if dealers actuality took the time to diagnose a vehicle i am sure they would find the faults, but people are lazy. Keep it Up Dan
Thanks for watching
@DiagnoseDan I had a similar issue with a Skoda Octavia of the same age. Came into our shop with an oil leak, that once fixed by my colleague, the engine was steam cleaned off by him with it running. He drove it back in the shop saying the dash was lit up like a Christmas tree with warning lights. After switching off, it would not restart. There was no comms either with a scan tool. I half expected the fault to be under the bonnet from the steam cleaning, but (long story short) testing with scope found the bus shorted to ground, which I located to the gateway. I removed it and water ran out of it! Turns out, a poorly fitted replacement windscreen meant the steam cleaner pushed water through a gap in the windscreen sealant and down the bulkhead sound insulation straight into the top of the GW module! So we had to buy the customer a new GW module and inform them their windscreen needed resealing. Bad luck for us, but a lesson learned.
You wouldn't believe the amount of faults i have diagnosed because of poorly installed aftermarket windshields!
Dan, Your title says the best: brain dead V.W, and the same is also true for anyone buying a V.W 😂
Putting jokes aside, you are the KING of car diagnosis !
Thank you very much
Brilliant again Dan, can’t understand why people use other garages rather than going to the man who diagnose,s and does it properly, hi from Ireland
😁🇮🇪👋
I’m sure you aren’t the only person in the world with such a confident and thorough knowledge of the black magic of modern CANBUS systems, but you are the only one I know of and it’s very reassuring that it isn’t actually magic or “weird”. It’s all stuff that can be symptomatic and for the right person possessing the proper knowledge and experience, it’s just following the chain down to the problem, like any other problem on a car.
My working VAG does the same, if start stop is on, and lets say I stall it, it will restart by itself. Have done that from new.
I had the same age and the same 1.6tdi golf, and in winter when it used glow plugs i just held the brake and turned quickly to start the position and the car would crank and start automatically after the glow was done.
This one doesn't 👇
czcams.com/video/2sPkRuA2S6M/video.htmlsi=w4dzuWwMN2Dscjub
I guessed right from the topography which is just like a wiring diagram.
Where I guessed, you proved.
That is what the customer wants. 💯
Great thinking 😁👍
Thanks for the great content Dan! Those shops must be thankful to have such an intelligent guy close by who can help in a pinch!
Thanks for watching 😊
Thanks so much for this video! I have my Vento Variant (Golf variant in my country), same as the one in the video with the same issue after a front crash. The mechanic was going crazy trying to figure out a solution. I will suggest this.
Hi Dan. Just stumbled on your video clips and had to subscribe. Your enthusiasm, excellent communication skills in explaining, diagnosing and repairing a faulty unit is faultless. Car dealerships should take time to learn a tips from watching your channel. Keep up the good work on your channel 😊
Cranking on it’s own, Immediately reminded me of the 80’s movie Christine 🤣
Herbie🤣
Man I was expecting a bad ground, no parts required repair 😄
Great diagnosis Dan! Having the donor module on hand was very helpful! 🙂
I'll leave the "No parts required" videos up to you🤣 Having a donor module was helpful Indeed. The customer agreed to installing a new one and i programmed that using Odis👍
You're a legend Dan! Your knowledge never ceases to impress! Tip of the cap to ya.
Tip of the cap, i had to look that up😂 thank you Jacob 😁👍
This has become my favorite computer repair channel.
🤣🤣
Was so scary but had an idea of where to start. Thanks Mr Dan. I wasn't expecting it so short😂. That was so cool. Im helping yu to diagnose from southern Africa 😂😂😂
Yes short diag this time😊
Thank you Dan for your excellent diagnostic videos. I learn from each one you do.
Thats great to hear
Thank you for this very informative video. A very difficult problem made to look achievable.
Your spot on with your diagnosis techniques.
Love your videos.
Please put out more.
Thank you
Great and short path to figure out the roots of the problem as usual great Job!
Thank you
Good to see you again Dan. Thanks for these great videos. Stay Safe.
Thanks!
You are the man,diagnose Dan,it’s always great to see you work on the difficult problems,thanks
Thanks for the great comment
Love seeing you have new videos.. Thank you!! 🇺🇸
Thanks for your comment
Love watching your videos! Great work as always.
Thanks!!
So nice to see a real expert who is using deeper tools to diagnose thing rather than just plugging a scanner and saying “don’t know” when it’s not coming back with nothing.
New subscriber from this video.
Thanks for subscribing!
Always learn so much watching Dan, thanks 🙏 for sharing!
Thanks Mark😊
As usual very educative thanks Dan!
Great job as always. How understandable diagnostic could be when someone explain it on this way. Bravo 👏
Keep it simple!😁👍
Fantastic Dan, your methodical problem solving is something to behold
Thank you!
On a cold wet January morning in the UK and being a retired Electrical Engineer I enjoyed the video. Keep em coming. 👌
Just watched Jake doing the same thing, awesome Dan you fixed it again!!
Yes what are the chances!
very enjoyable Dan and another great diagnose. cheers Dave NZ
As always Dan you fix it again and one more learning video for us .Brilliant 🎉🎉
😁👍
VERY impressed with your communication skills as well as your step-by-step logic in diagnosing. 😃
Thank you
Dan, I just wanted to say thank you for everything you teached me and others. Thank you.
Thats great to hear!
Great case study Dan, thanks for the in-depth footage and a breakdown of your own thoughts here. Hopefully if I get a similar fault at the workshop I'll remember this video
Thank you very much
I like that pragmatic approach to problen solving and never get tired of your videoes Dan. There are a real treat here on you tube 😁👍
😁😁😁😁😁
Your videos are so well presented and clear thank you 😎
you are the best greetings from Germany💯
I love it! Always you fix it. Good job Dan!
Thank you
Ik heb met veel aandacht jouw verhaal gevolgd.
Het was even heel goed opletten, maar ik heb het begrepen.
Mijn dank is dan ook weer groot omdat je de moeite heb genomen om er een video aan te wagen.
I have followed your story with great attention.
It took a while to pay close attention, but I understood.
Thank you again for taking the time to make a video about it.
Dat is geweldig om te horen, dit soort berichten zijn precies de reden dat ik deze videos maak!
Brilliant Dan as always, keep up the amazing work.
Its my pleasure
Hello Dan ,great video ,as always very detailed for us on how to diagnose ,tank Dan ,you fixed again 😀 👍
😁👍
Great strategic diagnosis. As always Dan fix it again!
Thank you very much
Awesome diagnosis again Dan, epic 🎉
Thanks!
Is there a car you can't or couldn't fix ? I watch your materials & also learn some things. Good work !
Thanks for watching!
Thank you Dan! Another great video🎉
Thank you
I always learn something from your videos. Thank you 🙏
Thats great to hear
Happy to watch your new and very interesting videos. Thanks Dan❤❤❤
Great!😁👍
First decent CZcams content today, thankfully I subscribed 😀
Thanks for subscribing and i hope to see you more often Steve👍
Brilliant. Not only the process but the clarity of explaination (especially as English is not your first language). ❤
Thank you
Nice one Dan, i did one like this a few years back i did the same thing tried out from another car great video Dan as always
Great!😊
You are better than any school!!!
Hartelijk bedankt.
Graag gedaan 😁👍
Nicely done Dan 👍🏻
Thanks!
Great job as usual Dan!
Thanks!
I would of been Soo confused, sad thing is I used to be a VW tech but never ran into this but makes so much sense. Great video
Its not uncommon for these modules to fail
Watch this👇
czcams.com/video/2sPkRuA2S6M/video.htmlsi=w4dzuWwMN2Dscjub
your videos have helped me with diagnosing vehicle problems immensely. Thanks again Dan!
Hi Mike, thats great to hear. I hope one day we can meet in person
@@Diagnosedan I'm re retiring sometime in the near future and I got my passport! I'll let ya know!
Well done Dan, the way you present the problem, it looks easy, but actually this is one of the more complicated problems and few of the garages, even importer garages, will solve the problem in a short time, they have the advantage of having a stock of spare parts. By the way, I purchased TOPDON a long time ago, an excellent scanner with lifetime support
I can imagine that some technicians are lost if they can't read codes.
For a moment I was wondering what the MGB was going to give you when you panned across 😅
🤣🤣
Excellent work Dan 👍
Thank you
This video was very useful for me ,, thanks Dan for such good explanation
Thats great to hear, glad you liked the video
amazing knowledge as always Dan!
Thank you
Great video. Thanks Dan !
Its a pleasure
Massive respect Dan from the UK 🇬🇧 and Ireland 🇮🇪
Thank you
DAN, brother of course enjoyed the video and bravo to ur thought process and approach always learning from the best thanku for taking the time to do this. cheeeers
Thats great to hear
Would have guessed an earth problem caused by the shunt would be the problem. But learned something new about the gateway.
The damage was not related this time😊
Dan, you’re a car scientist.👏🏻👏🏻👏🏻👏🏻
🤣🤣
I suggest that the channel be called professor dan, I enjoy watching how you solve complicated electrical problems on vehicles and at the same time explain to us in a simple way how to solve the problem. Thanks for the shared knowledge and expertise.
Its a pleasure max
Another cool video Dan love your thought process.
Thanks
Thanks for this informative video. I know these videos take time to make, and some of them take a lot of time to make.
Yes it takes some time but reading the comments make it all worth it.
Good job again,Dan👏
Right diagnose it is 99% successful repair.👋
Thanks for watching
As always Dan, thank you for sharing, you make it look so easy but when you are an expert like your good self well enough said. 👍👍
Thanks for the great comment, and sorry for the late response 😊
No worries Dan, I know that you are busy. 👍
Thank you very much for such an educative video
I always make sure I watch at least five of your videos before I go to bed and it’s really worth it to me as an undergraduate student
Ha ha dont you get nightmares😂
@@Diagnosedan haha just as you’ve said so 😂😂😂😂😂😂
Como siempre el más chingon 💪 dan great job
Thank you
Great . Thanks for teaching us. For free. God bless you sr.
Thanks
Really nice to watch. All the time.
Thank you
We learning more knowledge see your videos thankyou 😊
Great!!
Good diagnosis and checking the basics, I know someone who ordered and installed a new ECU only to find a blown fuse.
Thats sucks😬
Great job, Dan.
Thank you
Awesome as always. Thank you Dan
Thanks!
Dan fixed it again! Thanks for the video.
My pleasure
WoW Man you're AWESOME👍🏻
DiagnoseDan Fixed it Again😎
Stay Safe BRO👍🏻
Thank you
Perfect example of vehicle communication pathways.
Thanks for watching
Nice one. You did it again Dan.👌
😁👍
Well done mate very interesting and different keep them coming.
Thank you
Great work Dan
Thank you
Strong work Dan. 👊👊
Thank you
learning new things every time!
Thats great to hear
CZcams Technical Service Bulletin:
Always click Like before watching any Diagnose Dan videos 👍
👍👍👍👍
Excellent job Dan an easy fix shame they spent out on a new alternator when it was the module. Keep the videos coming 🇬🇧👍👍👍👍👍
Thanks for watching Michael