How to program Land Rover with Mongoose Pro lead and SDD software - L322 AUX input (as example)
Vložit
- čas přidán 12. 09. 2024
- Here i am following on from a previous video of where i showed where the AUX wiring for an L322 retrofit.
The software i am using:
JLR SDD V159.06
The cable i am using:
Mongoose Pro
The website to get JLR access code:
www.vehcom.com
As it states in the start of the video, this is purely for guidance and demonstrating how i changed the CCF (car configuration file) using all the above. Please do what you want with this information, and i am not liable for any damage you MAY cause.
Impressive that you sat through all the updates on SDD. Perhaps I got corrupted software but I ended up forking over the money for an IID tool.
That is noline or offline?
hallo great video friend,do you are using a china mongoose thanks
Hola, hablas español? Lo digo por tu nombre. Tengo un Jaguar Xf y me ha parecido muy interesante la explicación con el SDD. Quiero aprender a manejarlo lo mejor posible, no sé si podría contactar contigo.
Useful video, thanks
Can i add a smart key for jaguar xf 2013 with SDD?
Thanks
Any ideas how to update sat Nav on a 2009 facelift? No dvd for this model
Where can we get a cable and the software?
Mongoose reading on range rover 2005(m62 4.4) navigation system? Can i clean and scann all system car?
I have a problem with the light on my rack I would like to fix it
how to have a password in order to connect and delete it with sdd
can you help me thank you
Is it works on L322 2002 with m57 engine? Need to resset airsusp inactive problem?
Is this a diagnostic tool?
That's a good video but long thing to do and i beat it could be very risky
is this working after headlight replacement?
Hi, can you let me know if this pin assignment the same to 2007 XKR?
Brian Fung I believe so chap
@@rickardodiaz haallp! I got mongoose and jlr160 installed. Got access code and orange engineering mode working BUT after the message OPERATOR INFORMATION window, I click the tick and I get a window that says "ALL DATA SOURCES HAVE BEEN DEEMED INVALID etc. and it defaults back to the boot screen. Have you seen this and have solution? the obd2 chinese people are not helping :\ Cheers mate!
Can this modify the VIN
Is the good for v164
do you have to use the mongoose cable? does any cable work?
Yes, has to be Mongoose or clone.
Can a Land Rover dealer do this for me?
Hello. you don't know what you need to change in ccf to run the reversing camera? is it enough to just activate the camera or some additional option.
Jacek Lis I did this on mine, was going to do a video, but didn’t. If you enable it and it doesn’t activate when you put the car into reverse, your radio needs an update. You need a 2007+ sat nav disc, then run the “enable destination on the move” in SSD, this takes 2 hours and is risky with a clone but worked for me. Hope that helps
@@rickardodiaz ok i have a disk from 2010 i will try to do it when i find some free time. I do not want to be obtrusive but is there any chance to contact via Facebook or any other messenger in case of any additional questions?
Join the group “Range Rover Owner / Range Rover L322” group on Facebook mate
@@rickardodiaz I activate camera today. THX Mate :-)
What did you lot use for a camera and where did you plug it in?
Where do i buy an oem mangoose please
Brilliant it’s let my activate my webasto heater so I can set on timer on the infotainment screen in the ccf menus
£39 what a bargain
Hi, I tried to program to enable AUX input but it seems runs complete but does not make any change. It has a message that the some kind of file is not updated and seems trying download real time. Is this the case that I need to have to laptop connected to internet while programming?
Is there any file I need to update? Information is much appreciated.
Brian Fung , I’m not an expert by any means, but yes you do have to be connected to the internet, that may be your problem mate
@@rickardodiaz Thanks mate. I think the problem could be not entered the engineering mode yet and attempt to run the service function. Is it true only the "Code Access" is entered in order to update the car?
The car has also some parking sensor fault code, do you know where to clear it? Thanks.
@@rickardodiaz Hi Rick, I managed to get into Engineering mode but when I try to run the "Add Aux-Input function, it prompt for new file and I am not able to get it online. The download always fails.
@@rickardodiaz hallo friend thank you for all this information,what mongoose pro cable you are use friend does it clone china or original type,iam think to buy a china adapter will it work like this without problems and can i use it online programming,thank you a lot
Brian Fung , I am afraid I can’t help you too much, mine played up one or twice before I was able to get it done. Make sure you’ve done all your updates and try again
Brilliant it’s let my activate my webasto heater so I can set on timer on the infotainment screen in the ccf menus
£39 what a bargain.
helle i have version v163 jlr sdd pro pro for jaguar where is the seed code that you put togenerate the password as it a jaguar . jaguar function i put CCF_EDITOR because i cannot find x760 thank you in advance