BMW Z4 E85 E86 E46 3 series Control Arm Bushing DIY Replacement

In this video I remove and replace the front control arm bushings in my 2003 Z4 E85. While the recommended method is using a Puller tool, I used a Dremel tool to cut through the old bushing. It worked pretty well. There are other models of BMW from the same era that use the same style control arm bushings (E46 3 series) I hope the video is helpful and that you will LIKE and SUBSCRIBE.
www.workman.co.jp/
BMW Front Lower Control Arm Bushing: amzn.to/4aDW6F2
Puller set: amzn.to/49FgYuc
GOPRO HERO: amzn.to/446sHRt
Wireless Microphone: amzn.to/3UjF1ui
Utility Knife Olfa 224BS X-Hyper Large Cutter: amzn.to/43Z8H3j
Safety Glasses: amzn.to/3W1l90w
Dremel 3000-1/24 Variable Speed Rotary Tool Kit: amzn.to/3vXeQk0
3/8 Extendable Wrench: amzn.to/49Q3BZ3
3/8 Torque Wrench: amzn.to/48TBtD5
Craftsmen Socket set: amzn.to/43hyNOA
Jack: amzn.to/48ScOiw
Jack Stands: amzn.to/3PiMO8M
All Purpose Cleaner/Degreaser: amzn.to/3vebCIr

[@bigbuffalophill]

Man i hope this'll be the end of my wobbly front suspension

[@diyforlife2809]

Good luck...No one likes a wobbly suspension !

[@AlessioSangalli]

I tried this evening but I wasn’t able to put on the bushing. I’ll try with some lubrication

[@diyforlife2809]

A lot of dish soap and pull towards you. I had to prop myself against part of the car and pull with all my force.

[@AlessioSangalli]

@@diyforlife2809thanks