Battery Level Indicator / Battery Full Charge Indicator / 3.7 Volt Battery Charger/Battery Indicator

Sdílet
Vložit
  • čas přidán 20. 08. 2024
  • Battery Level Indicator / Battery Full Charge Indicator / 3.7 Volt Battery Charger/Battery Indicator
    ★ Use electronic component:-
    1, Red And Green Led
    2, 100Ω & 3.3KΩ Resistance
    3, Wire
    PATRA TECH CZcams Channel Most Popular Video -
    🔥 Life Time Battery For Wall Clock - • Lifetime Battery For A...
    🔥 3.7v Battery Low & Full Level indicator - • 3.7v Battery Level Ind...
    🔥 Simple 3.7v Lithium Battery Charger Circuit - • How To Make 3.7 Volt B...
    🔥 Pam8403 Mini Audio Amplifier Board - • Make a Audio Amplifier...
    🔥 Auto Cut Off 12v Battery Charger - • 12v Battery Charger Ci...
    🔥 Voltage Regulator Using Diode -
    • How To Make a Voltage ...
    🔥 Pam8403 & 5v Bluetooth Module Connection - • Amplifier Module With ...
    যদি আমার VIDEO টা আপনাদের ভালো লাগে তো আমার VIDEO টাকে LIKE করবেন SHARE করবেন COMMENTS করবেন আর SUBSCRIBE করে আমার সাথে জুড়ে থাকবেন এরকম INTERESTING এবং KNOWLEDGEABLE VIDEO দেখবার জন্য
    Like, Share, Support, Subscribe·········
    👉 Subscribe- / patratech
    👉 Twitter- / patratech86
    👉 Facebook- www.facebook.c...
    👉 Instagram- / patratech86
    👉 Facebook Page- / patratech86
    👉 Gmail-PatraTech86@gmail.com
    Disclaimer: Copyright Disclaimer Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. All The Information Provided On This Channel Are For Educational Purposes Only. This Channel Dose Not Promote Or Encourage Any illegal activity. The Channel is No Way Responsible For Any Misuse Of The Information.
    👉 Background Music :-
    [ CZcams Audio Library ]
    // Subscribe our Channel for More Updates & Click on the Bell 🔔 icon for any Notification //
    #patratech #batterylevelindicator #batteryfullindicator #howtomake3.7vbatterylevelindicator #batteryoverchargeprotection #4vbatterylevelindicator #9vbatterylevelindicator #batteryfull&lowlevelindicator
    -THANKS FOR WATCHING THIS VIDEO-
    I Am
    Sourav Patra
    From - Kakdwip West Bengal (India)
    South 24 pargana
    Related To This Video -
    How to make 3.7v battery level indicator
    How to make 3.7v battery level indicator no ic
    How to make 3.7v battery full and low level indicator
    Diy battery level indicator
    How to make 3.7v battery level indicator no realy
    Simple battery level indicator
    How to make 3.7v battery level indicator circuit
    3.7v battery level indicator
    Battery level indicator 3.7v
    How to make 3.7v battery level indicator no bc547 transistor
    Make 3.7v battery level indicator without bc547 transistor
    patra tech
    how to make 3.7v battery full & low level indicator
    battery level indicator
    how to make 3.7 volt battery level indicator
    how to make battery level indicator
    full & low level indicator
    battery full & low level indicator
    battery charge level indicator
    battery full charge indicator
    battery low indicator
    4v battery level indicator
    3.7 volt battery charger automatic
    3.7 volt battery charger
    3.7 volt battery level indicator

Komentáře • 41

  • @rathvavarsha1108
    @rathvavarsha1108 Před rokem +5

    Nice Bro...❤👍👍👍

  • @user-cb4vv4yw4q
    @user-cb4vv4yw4q Před 17 dny +1

    شكرا
    جرب ضع الشاحن والبطارية والجهاز ستجد ان المصباح الاخضر يشتعل والبطارية فارغة

  • @arifchy4627
    @arifchy4627 Před rokem +2

    Nice to vbo😮😮😮😮😃

  • @romualdopedropitarelo3015
    @romualdopedropitarelo3015 Před 8 měsíci +1

    Para 12v, teria que alterar os resistores?

  • @valtersouzaribeiro761
    @valtersouzaribeiro761 Před rokem +1

    Bom dia parabens muito bom

  • @butchimperial6738
    @butchimperial6738 Před rokem +3

    Pwede ba to sa 12v battery..tnx

  • @0marraqueta
    @0marraqueta Před rokem +2

    hi, and with led RGB??

  • @christiankulmann3325
    @christiankulmann3325 Před rokem +2

    🌦winter (mini-) solar tips: 1.) My automatic DIY solar tracker 2-axis: czcams.com/video/_Rs8CptQcDw/video.html . 2.) Increase your solar self-power consumption or balcony power plant to save a lot on electricity costs: czcams.com/video/eC2olbCBhh0/video.html or new czcams.com/video/vnUfHFst4Tc/video.html. Avoiding grid purchases will shorten the payback period. With Dimmer + Solar PV, self-sufficiency can now increase to almost 95%. That's how easy it is to suppress expensive grid purchases. The electricity bill stops just like the electricity meter. czcams.com/video/D9Ss0RuqZG0/video.html Kettle: Without a dimmer, the 2500W - 600W PV system needs = 1900W, which you have to pay more for. If I turn the kettle down to 600W with a dimmer, then every PV system that is too weak can now supply each consumer independently and independently, because the 2500W kettle becomes a 600W kettle thanks to the dimmer. No magic, just physics. How it works: czcams.com/video/wO9rw9bUea8/video.html . The prerequisite is that you have at least one small solar PV balcony power plant. You don't need an expensive battery. czcams.com/video/azDjqZpz77U/video.html The 2000W e-heater becomes a 500W e-heater via a dimmer, which can run 12 hours a day free of charge via PV with me. It is not the solar systems that have to grow, but the peak currents of the integrated device heaters simply have to drop by 75%. With the dimmer / voltage controller it has become so easy. I have already switched my entire household (2020) to 4x dimmers. Please have a look at my channel. ... 🌦... Increase mini PV solar self-sufficiency (winter and camping): A boiler and other power-hungry consumers can be infinitely reduced using the "5000W dimmer". Ebay €7. I run 4 dimmers in parallel on an 850W inverter. Kettle 2.2KW at 150W runs 12 hours a day, so the water is always hot. The room is also nicely heated. 2.5KW washing machine runs in parallel with dimmed to 400...600W and always reaches its 60°C, and also its 1400rpm... It doesn't matter to the washing machine whether it changes the washing temperature to 5min@2500W or 100% can be achieved free of charge via existing PV power in 20min@600W. The wash cycle lasts the same time dimmed and non-dimmed, 3Sth 10min. The iron czcams.com/video/-71oL7z1kMU/video.html , dishwasher czcams.com/video/8vnAkrS1x-s/video.html , oven , electric heater, czcams.com/video/QbLWDbJi6ew/video.html , waffle iron youtube.com /shorts/ofanZCdYEjA?feature=share , coffee machine, all internal heating is throttled with me. Lots of videos on my channel. The inverter stays cool and quiet and the MOSFETs + (battery packs) stay intact because extreme total currents no longer arrive at the inverter. Now every Mini PV Inverter is enough to operate large devices. So, with the dimmer, all internal heaters/devices can be converted into base load devices that stay almost permanently ON, drawing very little current directly from the PV. With a wattmeter / energy cost meter you can then measure this perfectly in order to set the dimmer optimally. .... 🌞 .... "smart energy saving" made a meaningful reaction explanation video about the dimmer: czcams.com/video/EHtJGiXAjZk/video.html . 👌... More videos on my channel. 🌞... 1.) A "split air conditioning system", is a mini heat pump, for heating and cooling and costs only 400€ at net or czcams.com/video/wB8rq-D9PAQ/video.html or https:/ /czcams.com/video/wo0cgRJcbsU/video.html and everyone can DIY for free because it's so quick and easy. 800Wp solar/balcony power plant costs 499€ at net, 2-3 of them provide free solar power for the mini heat pumps / split air conditioning system (up to 15°C). In winter, when it is extremely cold, you can continue to use your old gas heating normally for a short time. The efficiency of the heat pump is 300-580%, since "COP" is 3...5.8, which is why it is so superior to all technologies, because 1kW/h of solar power becomes 5.8kW/h of heat. A marvel of technology, and the efficiency winner. A large heat pump costs €3000-5000 czcams.com/video/_ovT0G5v-Z8/video.html DIY, which usually runs free of charge from the solar roof €5000 DIY. When it gets really cold, you can bridge these days with your old gas heater. In winter, more electricity comes from neighboring countries, but that's not a problem because of the interconnected grid. Hydrogen has an efficiency of max. 20%, against 580% heat pump. The heat pump is absolutely superior, and you can leave everything as it is with the old gas-oil heating system, you don't have to change anything... Explanation: Efficiency and "COP" with a heat pump: czcams.com/video/E3NUW0L8_cg/video.html . E-cars, heat pumps, power plants czcams.com/video/CLFLFX0OWNM/video.html . LG Christian ...

  • @charen6788
    @charen6788 Před 4 měsíci +1

    রেজিস্ট্রেশন এর মান কত কত সেটা তো কইলো না

  • @zishankhan2069
    @zishankhan2069 Před rokem +2

    Kya ye 12 volt me bhe chalega kya

  • @SarojBehera-hy4zh
    @SarojBehera-hy4zh Před měsícem

    Can I use it on 6000 mah battery

  • @sahajamalshaikh7379
    @sahajamalshaikh7379 Před měsícem +1

    12V KA KITNA LED LAGANA

    • @PATRATECH
      @PATRATECH  Před 14 dny

      Uska bhi video hai channel par

  • @naturesounds1664
    @naturesounds1664 Před 5 měsíci +1

    Can it be ysed for 8 amperes?

  • @tahmidhossen627
    @tahmidhossen627 Před rokem +3

    Nice? Bdo😮😜😘💞💖💕💞👍

  • @startcherif
    @startcherif Před rokem +1

    Hi Dear , we have 48 v 14 Ah battery, how can use the LEDs? Thanks

  • @atharvagaming6414
    @atharvagaming6414 Před rokem +1

    Bhai daiod lagakar battery charger kar sakte kya ?

  • @Yamin99931
    @Yamin99931 Před 8 měsíci +1

    ভাই নরমাল রিজেসটর দিলে কিছু হবে

  • @mrgadget67
    @mrgadget67 Před rokem +2

    now lest stat🤮🤣🤣🤣🤣🤢🤢🤧

  • @Eduholic
    @Eduholic Před rokem +1

    Not working

    • @PATRATECH
      @PATRATECH  Před rokem

      Try home

    • @Eduholic
      @Eduholic Před rokem +1

      @@PATRATECH I have tried at home, but only green led glows not red. I have changed the input voltage from 2.6 to 5v but only green led glows . It's not working.

    • @Eduholic
      @Eduholic Před rokem +1

      I have 18650 rechargable battery and gets totatlly discharged . I have connected to 5v input supply from mobile charger but i have no any indicator circuit to confirm that it's charging or not. If you can solve it, kindly help .