Simple FIX Fluorescent lamp
Vložit
- čas přidán 29. 10. 2021
- With 2 diodes. 2 capacitors and 2 resistors, you can easily repair fluorescent bulbs.
👉 Mijia Screwdriver : www.banggood.com/custlink/mDv...
👉 ADS5012H : www.banggood.com/custlink/GGD...
👉 RD6018W : bit.ly/3oMozQe
👉 My shopee:
If you like my video, give me a cup coffee. Thank you very much.
Donate : www.paypal.com/paypalme/phdhung
Facebook group : bit.ly/CreativeElectronic
Contact: Magnetron0989821611@gmail.com
Phone: 0989821611
#Inverter
#repair
#Homemade102 - Věda a technologie
I know that you made it and done nice job nothing is fake here these tubes have mercury vapour which glows at high voltage now this cfl can never die on it's own it a life long bulb till parts burn or tube break he used high voltage ~640vdc and it is enough to glow a small tube. Now this new cfl doesn't require its glowing bulb so if the tube is old or fused then also it will work. Impressive word brother 😊😊
Mantap jiwa terimakasih bagi2 ilmunya.
Cool!!!! very easy thanks
Nice job great!
perfect idea . soooooooooooooooooooooooooo beautiful
Excelent idea súper cool good
nice sharing. thank you
Nice video, keep it up, thank you :)
parabens ficou show
Awesome 😎😎👍
Supper 👌
Very good
Wow amizing
where did you buy that advanced soldering iron?
Thank u sir.I like it very much
Pf number plz.I cannot read.
great job , awsome
but can we use the same circuit for 18w and 32w fluorecent tube ?
What brand of soldering station are you using?
it very good but can we use this sircut for all of fluorescent
Thanks
Nice
Mantap mantap mks ilmunya sobat, sodernya antik kalo boleh tau beli dmn dan brp harganya sob?
Very good......
Thanks bro
Top the LINE
Wow
Good work
Thanks
Awesome !! So the current becomes half I believe !! may be it consume less power !
Nice video ❤❤❤❤😂
Thank you, extraordinary video, I am interested in the FCL lamps. Please ask a few questions before having some FCL lamps repaired. Questions:
1- Can I use two capacitors of 250V each?
2- What is the output of this circuit in volts?
3- If one of the 2 filaments is defective, does this lamp light up with this circuit? Thank you for responding to my questions.
👍
Woow
Once i tried to repair it and the whole bulb turned in to bomb 😂😂
Awesome video 💞
lol
I connected my cfl lightbulb at motorcycle ignition coil and then my notorcycle wouldn't turn on.
@@LabArlyn lol
Thank you very good video and very good idea. You have replaced the electronic card of the FCL lamp with a simple circuit. Questions: 1- what is the output of this simple circuit in volts and amperes if it is possible? 2- Is this circuit suitable for lighting all types of FCL lamps? 3- If one of the filaments of this FCL lamp is cut, can this circuit that you built light the lamp? Thank you for responding to my questions.
The blackened CFL bulb which is shown in the beginning is not used with this DIY circuit but a new CFL is used. Nice try, Homemade!!!!
You are right😀although I think he used that burned bulb and then realized it can’t work with that .so he changed the bulb.some small lamps can start on 220v without a hv kickstart and just need some current limiting component and a touch of an earth wire or hand on the bulb to work.
Its the same watch carefully
It is the same light bulb. After rectification multiplier. voltage at the 2 ends of the capacitor ~ 600VDC. Easy to light the bulb. you can try.
@@PhdHung Blackened CFL bulbs can't be revived. But if the inbuilt circuit is faulty then one may use the presented circuit.
Capacitor value is not clearly visible. Fused blackened tubes will not glow brightly.
Nice job great! But you don't answer my question about the name of BATTERY HOLDER that you used in making (DIY 500W PORTABLE POWER STATION) that you had put a Red Circle on said Battery Holder. Thanks.
That video is not mine. do you have a video link?
Parabéns muito bom
Jabardast
Is this a type of booster circuit
Is it a voltage doubler to boost the voltage across the tube🤔?
Is it same process with 65w CFL ???
Can I use 104J/400V capacitor with 500K resistor?
👍👍
Thank you very much ..from Bolivia 🇧🇴🇧🇴🇧🇴🇧🇴
Wellcome
Is it possible to browse your shopee in english ? Are you doing international shipping ? Thanks
that soldering iron 😋😋😋
Udaya 💡💡💡💡💡💡💡💡💡💡
👍👍👍👍👍👍👍👍
I have a 80w lamp. This value of capacitor will work?
I'm not sure, you can try
Chế mạch nguồn xung 220-12v dùng biến áp tg500 đi bác
ok b
Hóng video chế mạch nguồn xung 12v bằng tg500
Can you calculate the watts for this lamp after circuit modification?
~ 7W
@@PhdHung hey is there a way to make it work on 120v ? Please i would like you to respond
😮
This circuit is similar to the DC fluorescent lamp ballast circuit, but is slightly different.
The link doesn't work, but if you search for fluorescent lamp driver dc on Google, a circuit similar to that comes up.
The only thing shown in this video is that the resistor and capacitor in parallel are excluded.
And the reason why this circuit only operates at 230v can be found by looking at the discharge method of fluorescent lamps.
Discharge at about 650v to 1kv.
If you want to run at 100v, use a voltage doubler circuit rather than this circuit.
.what is the farad of capacitor??
Hello home made102,when you made a clip for new diy sine wave inverter with two pulse transformers?
Yes, JLCPCB is delayed. maybe soon.
Sir will it work with energy bulb?
i think ok bro
Can you build a mobile phone signal booster to use in rural areas? I couldn't find any proper tutorial on the internet for building such a device
Sure just use a couple of inductors and capacitors some wire and aluminum gum wrappers...
😮
Chắc nó ăn dòng hơn mạch cũ phải không anh?
Nó ko sáng bằng bạn à. Nghịch chơi vậy thôi 😂
First you put brown colour what is that name please.
How can i make it work with 120vac?
1 you can buy a 120 to 220v transformer or search how to have 240v in a 120v country
Sir please give circuit diagram and explain please🙏🙏🙏🙏 🥰🥰🥰🥰
Please miler capasiter waliw
but if it works so well with just a few circuits because companies put integrated ballasts in the lamps?
@@parsaDaneshjo با تشکر از پاسخگویی به من اکنون می دانم که فقط برای استفاده اضطراری است
bro its not stable only a few blink cold cathode will burn those caps
Pf.kitna.value.ka.hai
I tried but not working 😔 how to modify 14watt CFL light ...?
you used cold cathode startup bro it will over heat and blow up soon
,👍👍👍👍👍
220 volts?
x2 ~ 600VDC
What number of diode is that ?
u can use 1n4007
@@PhdHung ok
Bình luật đầu
The cfl how meny watt power
untuk wattnya berapa ? harus imbang dengan lampunya hebat kakak salam indonesia kakak dari mana
Sebenarnya rangkaian itu rangkaian pengganda tegangan. Dari input 220v jadi 440v, aku gak yakin kalau ini bisa.
Dia dari India.
@@LabArlyn meledak malahan wkwkwkw
@@LabArlynbisa kok tapi kurang maksimal, 220v ke 600v lebih itu
What a through at 1:08
Mạch nhân đôi điện áp
đúng r
I can't see the circuit diagram
What's the the value of the cap?
224 220nF
Sudah saya coba trik ganti mesin tak bisa nyala terus gamana masalahnya tolong di jelakan
Capacitor value
104/400V or 224/400V
How / why does it work
This is a voltage multiplier rectifier circuit. It increases the output voltage to ~600VDC.
i cant see what you do with the filament connection please, do a schematic next time
Value of capasitor? I cant see
224 ~ 220nF
@@PhdHung thanks
where's the scheme sir?
bro. Find the voltage doubler circuit on google
@@PhdHung Ok, thank you
And 127 Volts ????
What are the Capacitors???
u can use 474 - 250V
I tried 3 times this circuit it's not turn on a cfl bulb no
Do you use 120v ? You need 240v
Bác ơi nó có bền không
Chắc là bền, chỉnh lưu nhân áp thôi mà. Nhưng nó ko sáng đc như bóng mới.
Videonya kurang jelas saat menyambung kabel di cfl nya
My friend do have a GCash Number so that I send you a Cup of Coffee.
Thank you for your kindness, but I only use paypal
U don't give the values of capacitor & ur connections are vague.
WARNING READ THIS: this circuit only works with 220v to 240v so if you have 120v it will not work. Because the voltage is not high enough to trigger the mercury in the cfl
Sir can you made ne555 ic dc to dc step down converter
Diy joule thief
Input voltage 4v
😁😁
ok bro
این دروغ است
Please Send me Dagram.Of.Led With Component List With Value On My phone Thanks You we are waiting for themessage Thanks You
This is a fake video.
why?.
Have you tried it yet ?
It's real bro I try it and work
@@KurosakiIchigo0 yeah, It works, my friend tried this and it worked.